Cases46 cases

9 to 13 of 46

1. IL-0233 A VPC control plane release broke IP alias routes in Nebius eu-west1, and Managed Kubernetes pods lost connectivity

   Nebius2025

   Symptoms

   On 13 March 2025 practically every pod of Nebius Managed Services for Kubernetes in the eu-west1 region lost network connectivity for at least some time between 13:36 and 18:11 UTC. Packets for the affected IP alias routes were not processed by the data plane. The eu-north1 region was not affected.

   Network unreachable

   Trigger

   A release of a VPC control plane component in eu-west1, deployed to canaries from 13:36 UTC and to all other nodes from 14:35 UTC, changed route distinguisher values for a new feature. The change made a long-standing bug in the handling of route announcements take effect for the update messages of Managed Kubernetes pods.

   Root cause

   Software defect

   Component

   Network control plane (SDN)BGP routing

   Contributing factor

   Ineffective rollbackGap in automated testsMonitoring blind spot

   Remediation

   • Restarted the host VPC component on the affected nodes one node at a time
   • Restarted the host VPC component on the remaining nodes in parallel once the restart was known to fix the problem

   Action items

   • Fix the bug in the VPC host component itself
   • Add an alert on a diverging number of routes
   • Add an alert on the number of drops in the data plane
   • Develop a way to reset endpoints without restarting the host VPC component
   • Move the VPC's persistent e2e test virtual machines to canary hosts
   • Add persistent e2e tests for Managed Services for Kubernetes
   • Run e2e tests more often
   • Add a deployment stage in which non-critical internal services receive updates first

   Lessons

   The failure needed both an existing IP alias at release time and a particular order of node updates, and neither the testing installation nor the canaries met both, so neither caught it. Missing alerts on technical metrics that deviate from normal, here the number of routes and the number of drops, made the response much slower.

   View case
2. IL-0081 API requests timed out during deployment rollouts because the ingress-nginx enable-serial-reloads option held back endpoint updates while a long NGINX reload was running

   Cresta2025

   Symptoms

   During a deployment, traffic into the Kubernetes cluster started hitting dead ends: some API requests timed out and requests were slow and disrupted while the rollout ran.

   Intermittent timeoutsStale endpoint routingHigh latency

   Trigger

   A deployment rollout changed backend endpoints while a long-running NGINX full reload was in progress, with the enable-serial-reloads option enabled on the ingress-nginx controller.

   Root cause

   Software defect

   Component

   Ingress controller

   Contributing factor

   –

   Remediation

   • restarted the NGINX Ingress controller as an attempt to resolve the problem

   Action items

   • Open an issue in kubernetes/ingress-nginx describing how enable-serial-reloads blocks dynamic endpoint updates

   Lessons

   A flag meant only to serialise full reloads also delayed endpoint updates, which opened a window during rollouts in which the ingress routed to pods that no longer existed. Options that change how the ingress controller applies configuration need to be checked against what happens to endpoint updates during a long reload.

   View case
3. IL-0157 After a release, new nodes could not join Linode Kubernetes Engine clusters with IP ACL enabled, so autoscaling failed on about 20 to 25 clusters

   Linode2025

   Symptoms

   From about 01:00 UTC on 2025-03-05, Linode Kubernetes Engine (LKE) clusters with IP ACL enabled failed to autoscale: new nodes could not join the cluster, and some customers had service disruptions. About 20 to 25 clusters in several regions around the world were affected; the status page lists the US-IAD (Washington), US-ORD (Chicago), US-SEA (Seattle) and IN-MAA (Chennai) LKE components.

   Scale-up failureService outage

   Trigger

   Akamai deployed the latest LKE software release.

   Root cause

   Software defect

   Component

   Cluster autoscaler

   Contributing factor

   –

   Detection

   Customers began having problems at about 01:00 UTC, and the first status post, at 06:49 UTC, said the team was investigating an LKE autoscaling problem when IP ACL is turned on.

   Remediation

   • restarted the gateway pods, which gave only short-term relief
   • rolled back the release on all affected clusters

   Action items

   • Continue investigating the root cause and take preventive actions

   Lessons

   The defect hit only clusters with IP ACL enabled, and it showed when the autoscaler tried to add nodes. Restarting the gateway pods did not hold; rolling back the release ended the incident.

   View case
4. IL-0138 A failed Nvidia driver build left broken kernel packages on the only Kubernetes master node, which hit a kernel panic on reboot after a power outage and took the homelab cluster down for six days

   Barush Mendez2025

   Symptoms

   Every service in the homelab Kubernetes cluster stopped answering: the V-Rising server, Grafana, Jellyfin and Linkding were all unreachable, and the Kubernetes API was down, so the cluster could not be managed at all. The outage was found by hand, about 3 hours after it began, when someone tried to use the services.

   Control plane unresponsiveService outageMonitoring outage

   Trigger

   A power outage forced the Kubernetes master node to reboot.

   Root cause

   Software defect

   Component

   GPU driverLinux kernelKubernetes API server

   Contributing factor

   Ignored early signalChange with a delayed effectSingle point of failureMonitoring blind spot

   Detection

   Manually, when someone tried to access the services; there were no automated alerts.

   Remediation

   • Connected a monitor to the master node and read the boot logs, which showed the kernel panic
   • Booted the previous kernel version, which brought the system back
   • Removed the broken Nvidia packages with sudo apt-get remove --purge '^nvidia-.*' and ran sudo dpkg --configure -a
   • Found remaining broken packages with dpkg -l | grep -v ^ii and removed them by hand
   • Ran sudo apt-get install -f and reinstalled linux-headers-$(uname -r)
   • Rebooted and confirmed the kernel panic was gone

   Action items

   • Make sure GPU driver installations fully succeed, or revert immediately when they fail
   • Move the cluster to a high-availability control plane
   • Expose the Kubernetes API through a load balancer in the HA setup
   • Set up a ticketing system to record incidents and their resolution
   • Write predefined troubleshooting workflows to shorten response time
   • Add infrastructure monitoring such as Prometheus and Grafana
   • Add blackbox HTTP and TCP checks from outside the cluster for critical services

   Lessons

   A driver installation that fails half-way can leave kernel packages broken without any visible effect until the next reboot, which may come weeks later and at the worst time. A failed DKMS build should be fixed or reverted at once. With a single master node and no monitoring from outside the cluster, one unbootable machine meant a total outage that nobody was told about; the fix itself was simple once the boot logs were seen.

   View case
5. IL-0347 About 25% of Scaleway FR-PAR-1 hypervisors lost VPC connectivity when both VPC BGP route reflectors got stuck

   Scaleway2024

   Symptoms

   On 18 October 2024, from 7:50 to 8:01 UTC, about 25% of the hypervisors in Scaleway's FR-PAR-1 availability zone lost VPC connectivity with the rest of the region, and products that use VPC failed with them. Public internet connectivity and Elastic Metal VPC connectivity were not affected.

   Network unreachablePacket lossNode NotReady

   Trigger

   At 6:20 UTC a Top of Rack switch in FR-PAR-1 had a software crash. One of the two BGP route reflectors for VPC ran on a hypervisor in that rack and was left in an abnormal state.

   Root cause

   Software defect

   Component

   Network control plane (SDN)BGP routingNetwork switchDatabaseManaged Kubernetes control plane and provider API

   Contributing factor

   Excessive blast radiusAutomation amplification

   Detection

   Health-check monitoring on both route reflectors detected the anomaly, and the Scaleway Customer Excellence and SRE teams detected the customer impact and opened an incident.

   Remediation

   • Fixed both VPC route reflectors by manual action

   Action items

   • Fixed the autohealing mechanism that had failed to fix route reflectors stuck in a stale state; the fix is https://github.com/FRRouting/frr/pull/17163
   • Run different software versions on the route reflectors so a single bug cannot stop several instances
   • Investigate the software issue that left the route reflectors in a stale state

   View case

By root cause1