Cases19 cases

16 to 19 of 19

1. IL-0504 mybinder.org launches failed for about five hours as undeleted user pods piled up and filled the cluster

   Binder Project2018

   Symptoms

   On Saturday 8 July 2018 at about 18:30 CEST, the launch success rate of mybinder.org dropped to zero and stayed there. Suspicious behaviour was first reported on Gitter at 22:48, more than four hours later.

   Service outagePods PendingStale or inconsistent API reads

   Root cause

   Software defect

   Component

   JupyterHub

   Contributing factor

   No alert on limit

   Detection

   Suspicious behaviour was reported on Gitter at 22:48 CEST, more than four hours after launch success dropped to zero; no downtime notifications were set up.

   Remediation

   • Deleted user pods older than four hours with the delete-pods.py script
   • Culled pods of the most-used images, such as ipython-in-depth, more aggressively
   • Restarted the Hub pod after about 600 pods were culled, which brought launches back to normal
   • Cordoned some of the extra nodes so the autoscaler could reclaim them
   • Ran manual max-age culling the next morning, letting the cluster scale back to 3 nodes

   Action items

   • Set up notifications of downtime
   • Automate cluster scale-down
   • Document the downtime recovery steps so every team member knows them
   • Fix KubeSpawner's failure to delete pods when the pod reflector fails
   • Make KubeSpawner more robust to pod reflector failure
   • Refactor the event reflector into a single reflector instead of one per pod
   • Detect a likely unhealthy Hub state and restart the Hub without manual intervention

   Lessons

   The delete-pods.py script was useful for bulk-deleting old pods, and once the problem was noticed the cluster was healthy within a few minutes. The outage lasted five hours before anyone noticed because no downtime notifications existed, and scaling the cluster back down still took several manual steps of cordoning and draining nodes.

   View case
2. IL-0038 kubelet rollout hit a Kubernetes bug and left every node in a cluster NotReady, triggering mass pod eviction

   Oath2018

   Symptoms

   During a rolling update of a kubelet change in one of Oath's on-premises production clusters, nodes started going NotReady, and soon all nodes in the cluster were NotReady.

   Node NotReadyPod evictionPods Pending

   Trigger

   A change to kubelet was rolled out across the nodes of one cluster; on restart, kubelet cleans up transient cgroup files, and a Kubernetes bug in that step left kubelet stuck instead of starting.

   Root cause

   Software defect

   Component

   kubeletKubernetes controller manager

   Contributing factor

   No health probesExcessive blast radius

   Detection

   Nodes reported NotReady and the eviction graphs climbed while the kubelet rollout was in progress.

   Remediation

   • failed the affected data center over so users were routed to the next available data center

   Action items

   • Run a functional test of kubelet after each upgrade batch and certify it before the next 30% of nodes are updated

   Lessons

   Check kubelet after upgrading it before moving to the next batch; a simple curl against the kubelet API would have caught this. The node controller's eviction throttling and full disruption mode, which the speakers note is not well documented, kept a cluster-wide kubelet failure from evicting every pod.

   View case
3. IL-0040 Parallel Helm installs saturated small gp2 root volumes on a kops cluster and left all three workers NotReady with the kubelet or Docker down

   Saltside2017

   Symptoms

   While running the CI process on a local machine to test an application Helm chart, the SRE lead watched the pods with watch kubectl get pods. All pods reached Running, and then some went back to Pending. Two hours later the problem had grown and some pods showed the phase Unknown.

   Pods PendingImage pull failuresNode NotReadyService outage

   Trigger

   A CI run installed the application's Helm charts for all four markets (Efritin.com, Tonaton.com, Ikman.lk and Bikroy.com) on the nonproduction cluster at the same time.

   Root cause

   Capacity exhaustion

   Component

   Node root diskkubeletContainer runtimeHelm

   Contributing factor

   Unreviewed defaultsMonitoring blind spotIgnored early signalSingle point of failure

   Detection

   The SRE lead saw pods go from Running back to Pending while watching kubectl get pods during the CI run; no monitoring raised an alert, even when all three workers were not ready.

   Remediation

   • terminated the three worker nodes and let the auto scaling group replace them

   Action items

   • Fix the Datadog integration for the nonproduction AWS account and repeat the installs with telemetry
   • Increase the worker root EBS volumes from 20GB to 120GB
   • Keep common base images pulled on every node with a DaemonSet until kops supports user hooks
   • Configure different allocation limits for the different layers in Kubernetes
   • Discuss a highly available Tiller with the Helm team
   • Find a way to throttle the number of newly created pods

   Lessons

   An ordinary deploy of the application could collapse the cluster, because the default 20GB gp2 root volumes could not keep up with parallel image pulls and container starts. Without node metrics and pod phase metrics, three NotReady workers raised no alert. A single Tiller replica can block the deploy that would fix an outage.

   View case
4. IL-0468 New JupyterHub student pods stuck Pending on MaxVolumeCount after a memory limit cut with node size unchanged

   UC Berkeley2017

   Symptoms

   On 20 March 2017, from some time early in the day until about 13:00, some new student servers on UC Berkeley's JupyterHub stayed in Pending forever and the students got 500 errors that kept them from logging in.

   Pods PendingHigh error rate

   Trigger

   On 18 March at 16:30 the RAM per student was reduced from 2G to 1G to save resources while the nodes kept the same size of 26G RAM, and as a result the nodes hit the Google Cloud the limit on the number of disks per node.

   Root cause

   Capacity exhaustion

   Component

   Container memory limitCloud block storageNode pool

   Contributing factor

   Unknown limit

   Detection

   New student servers reported a 500 error that kept students from logging in. At 12:44 this was judged widespread, and at 12:53 `kubectl describe pod` showed the pods Pending on MaxVolumeCount.

   Remediation

   • Copied the Google Container Engine instance template and changed it to spawn smaller n1-highmem-2 nodes
   • Switched the managed instance group to the new template
   • Grew the instance group by 30 new nodes
   • Ran populate.bash so student pods would start on time on the new nodes
   • Stopped the simple autoscaler
   • Stopped and started affected user pods from the control panel
   • Restarted the hub and proxy pods

   Action items

   • Follow the status of kubernetes/kubernetes issue 24317
   • Find and fix the cause of the 'too many redirects' error in JupyterHub
   • Delete the older, larger nodes that are no longer in use
   • Alert when any pods stay Pending for a non-negligible time

   View case

By root cause6