Cases13 cases

3 to 7 of 13

1. IL-0124 Capacity changes queued while a circuit breaker was engaged ran all at once when it was released, taking multiple OpenAI inference engines out of service and raising API error rates

   OpenAI2026

   Symptoms

   Between about 4:26 PM and 4:56 PM PST on 4 March 2026, some OpenAI API requests to several models failed or took longer than usual, and some Codex traffic was affected too. The overall API success rate dropped temporarily.

   High error rateHigh latency

   Trigger

   A protective circuit breaker that had paused some scheduling operations was released, and the infrastructure actions queued during the pause were executed at the same time.

   Root cause

   Software defect

   Component

   Automated capacity manager

   Contributing factor

   Automation amplificationChange with a delayed effectNo safeguard on destructive changeMonitoring blind spot

   Remediation

   • manually reassigned infrastructure resources to the affected models
   • brought the removed inference engines back online and reassigned them until error rates returned to normal

   Action items

   • Improve safeguards in the automated capacity management systems so they detect and respond to state drift
   • Improve observability of circuit breakers and scheduling systems so their status and effects are easier to identify
   • Add safeguards so queued actions cannot run in large batches after long pauses
   • Improve monitoring and alerting around capacity reconciliation problems

   Lessons

   Pausing one automated system does not stop the systems that feed it. Changes queued during the pause reflect the state at the time they were queued, and releasing the queue all at once applies those stale decisions together. The fixes OpenAI names are detecting state drift, making circuit breaker status visible, and preventing large batches from executing after a long pause.

   View case
2. IL-0188 Rolling updates on EKS returned 502 errors for about 30 seconds because Kubernetes deleted old pods as soon as new pods passed readiness, before the ALB had marked the new pod targets healthy

   Yonghyun Kim2025

   Symptoms

   Every rolling update of the team's microservices on Amazon EKS, behind an Application Load Balancer, was followed by intermittent 502 and 503 errors for users. A Slack message at 3 a.m. read "배포는 성공했는데, 서비스는 죽었다" (the deployment succeeded, but the service died). Every pod was Ready and Datadog was green while users saw errors.

   High error rateService outage

   Trigger

   A rolling update of a Deployment served through an ALB that registers pod IPs as targets, with no pod readiness gates.

   Root cause

   Faulty deployment

   Component

   Cloud load balancerIngress controllerPod termination

   Contributing factor

   Unverified assumptionUnreviewed defaultsMonitoring blind spot

   Detection

   A Slack message at 3 a.m. reported that the deployment had succeeded but the service was down; Datadog dashboards were green at the time.

   Remediation

   • labelled the namespace with elbv2.k8s.aws/pod-readiness-gate-inject=enabled so the AWS Load Balancer Controller injects pod readiness gates and Kubernetes waits for the ALB target to be healthy before deleting old pods

   Lessons

   A pod being Ready in Kubernetes does not mean the load balancer will send it traffic. Without a readiness gate, a rolling update can delete the old pods while the ALB still considers the new targets unhealthy, and dashboards that track pod status stay green during the errors. Making pods wait longer on shutdown reduced the errors but did not fix the start-up gap and made every deployment much slower; the readiness gate ties the pod's Ready state to the ALB's view of the target.

   View case
3. IL-0005 A new telemetry service overloaded the Kubernetes API servers of large clusters and broke DNS-based service discovery for all OpenAI services

   OpenAI2024

   Symptoms

   Alerts fired at 3:13 PM PST on 11 December 2024, and from 3:16 PM every OpenAI service was significantly degraded or completely unavailable, including ChatGPT, the API and Sora. The status page reported API calls returning errors and difficulties logging in to platform.openai.com and ChatGPT. Customer impact peaked at 3:40 PM.

   Service outageHigh error rateControl plane unresponsiveDNS resolution failures

   Trigger

   At 2:23 PM PST a change introducing a new telemetry service, which collects detailed Kubernetes control plane metrics, was merged and the deployment pipeline started. Between 2:51 PM and 3:20 PM the change was applied to all clusters.

   Root cause

   Configuration change

   Component

   Kubernetes API serverClient-side DNS resolver and cacheTelemetry agent

   Contributing factor

   Unrepresentative stagingNo staged rolloutCache-masked failureMonitoring blind spotLimited debug access

   Detection

   OpenAI's detection tools worked: alerts fired at 3:13 PM PST, a few minutes before customer impact began at 3:16 PM, and the root cause was identified at 3:16 PM.

   Remediation

   • Scaled clusters down to reduce the total Kubernetes API load
   • Blocked network access to the Kubernetes admin APIs so no new expensive requests arrived
   • Scaled up the Kubernetes API servers
   • Removed the telemetry service once enough control was back
   • Moved traffic from impacted clusters to healthy ones
   • Intervened manually in clusters where simultaneous resource downloads saturated resource limits

   Action items

   • Put every infrastructure configuration change through a phased rollout with continuous monitoring of both the service workloads and the clusters, including the Kubernetes control plane
   • Run fault injection tests in which the data plane runs without the control plane for longer, and tests that roll out bad changes on purpose to check detection and rollback
   • Build break-glass mechanisms so engineers can reach the Kubernetes API servers in any circumstances
   • Decouple the Kubernetes data plane from the control plane so that service discovery for critical workloads does not depend on the control plane
   • Speed up recovery with better caching and dynamic rate limiters for resources needed at cluster startup, and regular drills that rapidly replace an entire cluster

   Lessons

   Several systems and processes failed at once and interacted in unexpected ways: tests did not catch the change's effect on the Kubernetes control plane, DNS caching put a delay between the change and the failures, and being locked out of the control plane made remediation very slow. Because service discovery used Kubernetes DNS, the control plane was carrying load for product traffic even though the data plane was meant to be independent of it.

   View case
4. IL-0060 Kubernetes 1.24 upgrade removed the master node label that Calico route reflectors selected on, dropping all pod routes and taking Reddit down for 314 minutes

   Reddit2023

   Symptoms

   About two minutes after an engineer started the Kubernetes 1.23 to 1.24 upgrade of the cluster running Reddit's legacy stack, just after 19:00 UTC, the site stopped. The CDN edge request graph, which is kept separate from the cluster, showed traffic by status collapsing. Users saw the error page, a homepage with no posts, or plain errors.

   Service outageHigh error rateDNS resolution failuresMonitoring outagePods stuck in ContainerCreatingControl plane lag

   Trigger

   An in-place upgrade of the legacy cluster from Kubernetes 1.23 to 1.24; in 1.24 the node-role.kubernetes.io/master label is removed even from running clusters.

   Root cause

   Breaking change in an upgrade

   Component

   CalicoKubernetes API serverAdmission webhooketcd

   Contributing factor

   Configuration not in codeUnrepresentative stagingUntested backupMonitoring blind spotSingle point of failure

   Detection

   The site broke about two minutes into the upgrade; an incident was opened immediately and responders were on the call within three minutes, working from CDN edge graphs because the cluster's own metrics were gone.

   Remediation

   • deleted the Open Policy Agent webhook configurations to stop API server timeouts
   • terminated all worker nodes of the cluster
   • restored the control plane from the pre-upgrade backup onto the first control plane node
   • switched off the cluster autoscaler until the control plane was stable
   • generated new TLS certificates so replacement control plane nodes could join etcd
   • brought traffic back in steps from 1% to 100%
   • restarted legacy services that had been stopped by hand

   Action items

   • Codify cluster configuration so every choice has a record, and document in detail what cannot be codified
   • Standardise components across clusters and replace bespoke configurations
   • Build tooling to manage the lifecycle of whole clusters so they can be recreated or replicated
   • Add pre-production clusters that can be tested with confidence
   • Improve the backup restore process and make cluster upgrades safe

   Lessons

   Configuration that exists only in a live cluster, edited by hand through a special tool, can be forgotten, as the route reflector setup was, and then break on an upgrade nobody connects it to. A Kubernetes upgrade cannot be reverted without a restore, so the restore procedure has to be kept current and practised. Consistent, codified clusters are what make upgrades testable; bespoke clusters keep producing outages.

   View case
5. IL-0009 A duplicated generated name made Argo CD replace the InfluxDB Cloud production Application and delete the whole production environment

   InfluxData2022

   Symptoms

   Right after a pull request to the infrastructure-as-code repository was merged, every API endpoint of one InfluxDB Cloud production cluster began returning 404 errors. Writes and reads failed alike: no one could collect data, scheduled tasks failed to run and external queries did not work.

   Service outageResources deletedHigh error rate

   Trigger

   A merged pull request whose rendered YAML added a new Argo CD Application and AppProject that an automation error had named app01-cluster01, the name of the existing production Application, instead of app02-cluster01; reviewers did not notice the app01 and app02 difference.

   Root cause

   Configuration change

   Component

   Argo CDPersistent volumes and stateful setsConfiguration templating

   Contributing factor

   Missed in reviewNo runbookNo safeguard on destructive changeMonitoring blind spotAutomation amplification

   Detection

   Monitoring and alerting did not detect the issue right away, so the team's first response was to try to roll the change back rather than plan a recovery. The write-up does not say how the team found out.

   Remediation

   • stopped the revert of the merged pull request
   • restored the etcd metadata cluster
   • recreated the missing Kubernetes objects so the retained PersistentVolumes became available, then recreated the StatefulSets
   • restored the Zookeeper volumes from an hourly Velero backup
   • rebuilt the Kafka StatefulSet one pod at a time with health and readiness checks disabled
   • accepted writes into the Kafka write-ahead log and scaled up the write path with more replicas and higher memory requests and limits
   • recreated the storage pods, which downloaded data from object storage, reindexed it and replayed the write-ahead log
   • re-enabled Argo CD, queries, dashboards and scheduled tasks, restored replica counts and ran final QA checks

   Action items

   • Write runbooks for restoring state when Kubernetes objects such as PersistentVolumeClaims are deleted but the data on the underlying volumes is preserved
   • Set every volume in every environment to retain data when its PersistentVolumeClaim is deleted
   • Improve the process for handling public-facing incidents
   • Store generated YAML as one object per file, so an overwrite of an existing object shows up as such in review
   • Detect duplicate objects when generating YAML and warn before review, treating objects with the same group, namespace and name as the same even when the apiVersion string differs
   • Add the Argo CD Prune=false annotation to all stateful resources and to Namespace objects managed by Argo CD
   • Set FailOnSharedResource=true on Argo CD Applications so Argo CD fails before changing an object another Application manages or managed

   Lessons

   The biggest gap was that monitoring did not notice the deletion quickly, which pushed the team toward a reflex rollback; in a stateful system a revert can create a new, empty instance instead of bringing the old one back. Retained volumes and clients that retry writes are what kept data loss at zero. Rendering many objects into one file let an overwrite of an existing object look like an addition, so generated configuration needs one object per file and duplicate detection that compares objects the way Kubernetes does. Stateful resources need protection from pruning, and that protection must cover their Namespace too, or deleting the namespace removes everything inside it.

   View case

By root cause5