Cases2 cases

1 to 2 of 2

1. IL-0150 A latent race condition in DynamoDB's DNS automation left an empty DNS record for dynamodb.us-east-1.amazonaws.com, and the DynamoDB and EC2 launch failures that followed caused EKS, ECS and Fargate container launch failures and cluster scaling delays in us-east-1

   Amazon Web Services2025

   Symptoms

   At 11:48 PM PDT on 19 October 2025, every system that reached DynamoDB in us-east-1 through the public regional endpoint started getting DNS failures and could not connect. This included customer traffic and internal AWS services that depend on DynamoDB. DynamoDB global table replicas in other regions still answered but fell behind in replication to and from us-east-1.

   DNS resolution failuresHigh error rateScale-up failureIntermittent connection failuresHigh latency

   Trigger

   One DNS Enactor, slowed by unusually high retry delays, applied a much older DNS plan to the regional DynamoDB endpoint just as another Enactor that had applied the newest plan ran its clean-up, which deleted that older plan and with it every IP address of the endpoint.

   Root cause

   Software defect

   Component

   Authoritative DNS servers and recordsApplication databaseCloud load balancer

   Contributing factor

   Automation amplificationRetry stormNo runbook

   Detection

   DNS failures to DynamoDB began immediately at 11:48 PM PDT and the engineering teams of affected AWS services were engaged at once; by 12:38 AM they had identified DynamoDB's DNS state as the source. The later NLB health check problem was detected by monitoring at 6:52 AM.

   Remediation

   • applied temporary mitigations by 1:15 AM that let some internal services reach DynamoDB and repaired key internal tooling
   • restored all DynamoDB DNS information by 2:25 AM through manual operator intervention
   • throttled incoming work and selectively restarted DWFM hosts from 4:14 AM so droplet leases could be re-established
   • reduced the load on Network Manager to bring network configuration propagation times back to normal by 10:36 AM
   • disabled automatic health check failover for NLB at 9:36 AM, and re-enabled it at 2:09 PM after EC2 recovered
   • relaxed the EC2 request throttles from 11:23 AM until all EC2 APIs and launches were normal at 1:50 PM

   Action items

   • Disable the DynamoDB DNS Planner and DNS Enactor automation worldwide
   • Fix the race condition and add protections against applying incorrect DNS plans before re-enabling the DNS automation
   • Add a velocity control to NLB that limits how much capacity a single load balancer can remove when health check failures cause availability zone failover
   • Build an additional EC2 test suite that exercises the DWFM recovery workflow at scale
   • Improve throttling in EC2 data propagation systems so incoming work is rate limited by the size of the waiting queue

   Lessons

   A single DNS record that automation can empty is enough to take a widely used regional endpoint off the network, and every service built on it fails in turn. A check made once at the start of a long operation can be stale by the time the operation writes its result. Recovery of the dependency is not recovery of the dependents: systems that lost state during the outage, such as EC2's droplet leases and network propagation backlog, can collapse under their own catch-up work, and container services that rely on new instance launches keep failing to launch and scale until that work is done.

   View case
2. IL-0208 A GitLab chart bump that renamed Kubernetes Service and Deployment ports made the GCP load balancer reconfigure, and GitLab.com slowed down and returned intermittent 50x errors

   GitLab2022

   Symptoms

   At 07:53 UTC on 2022-03-31 the rate of 50x errors on GitLab.com went up, and at 07:54 PagerDuty paged the engineer on call (EOC) about the rising error rate. Users saw slow pages and intermittent 50x error pages. The incident lists the Web, API, Git and Pages services as affected.

   High error rateHigh latencyIntermittent timeouts

   Trigger

   A k8s-workloads/gitlab-com pipeline deployed merge request !1643, a GitLab chart bump that changed the port names of Kubernetes Services and Deployments (related to the Prometheus service and pod monitors), starting with the canary environment gprd-cny at 07:49 UTC.

   Root cause

   Configuration change

   Component

   HelmCloud load balancerHAProxy

   Contributing factor

   Automation amplification

   Detection

   A PagerDuty alert on the rising error rate paged the EOC at 07:54 UTC, one minute after the 50x errors went up. The engineer deploying the change noticed the errors and linked them to it.

   Remediation

   • drained the canary environment and re-enabled it after twenty minutes
   • cancelled the deployment jobs for clusters c and d before they started
   • drained gprd-us-east1-d in HAProxy and re-enabled it five minutes later
   • raised the minimum replica count above 100 (merge request !1650)
   • drained gprd-us-east1-c in HAProxy, deployed the change to it, and re-enabled it
   • reverted the minimum replica increase (merge request !1652)

   Action items

   • Implement graceful draining of a whole regional cluster
   • Create a Chatops command that puts PagerDuty into maintenance mode

   Lessons

   Renaming ports on Kubernetes Services and Deployments behind a GCP load balancer made the load balancer reconfigure, and requests were slow or timed out until the new configuration had fully applied, which took minutes. GitLab notes that alerting worked well. The follow-up work is a way to drain a whole regional cluster gracefully and a Chatops command to put PagerDuty into maintenance mode.

   View case

By root cause2