Cases2 cases

1 to 2 of 2

1. IL-0179 With DEBUG logging and synchronous log output, a high-traffic service filled the 64 KB stdout pipe, so request threads blocked in write() while holding database connections and HikariCP ran dry, failing requests in 30-second bursts

   MUSINSA2026

   Symptoms

   The on-call engineer for a high-traffic service was alerted that requests were failing in large batches every 30 seconds.

   High error rateIntermittent timeoutsConnection pool exhaustion

   Trigger

   DEBUG level logging was on in production when traffic surged, raising log volume to about 100 times normal while the service logged synchronously.

   Root cause

   Configuration change

   Component

   Application logging libraryContainer runtimeTelemetry agentApplication database

   Contributing factor

   Unverified assumptionExcessive blast radius

   Detection

   The on-call engineer was alerted that requests were failing in large batches every 30 seconds.

   Action items

   • Replace synchronous logging with TraceAwareAsyncAppender, which captures trace_id and span_id on the calling thread and drops logs instead of blocking when the queue is full (neverBlock=true)
   • Keep the amount of log output at a sustainable level, since an asynchronous queue still fills under sustained overload

   Lessons

   Removing AsyncAppender to keep trace IDs also removed the protection that kept request threads away from stdout back-pressure. A company-wide standard applies the same side effect to dozens of services, so check what a standard rests on and what working behaviour it takes away. ThreadLocal context does not cross into an asynchronous worker, but capturing it on the calling thread before handing the event off keeps both the IDs and the asynchronous output. Under extreme load, dropping log lines is preferable to stopping request handling.

   View case
2. IL-0145 A power sag and chiller failure in one Australia East availability zone took down the AKS control plane's compute and its non-zone-redundant SQL Database operation queue, blocking AKS create, update and delete operations in Australia East and Australia Southeast

   Microsoft Azure2023

   Symptoms

   From about 10:30 UTC on 30 August 2023, customers had trouble accessing or using Azure, Microsoft 365 and Power Platform services in Australia East. The affected Azure services included Azure Kubernetes Service (AKS) along with storage, SQL Database, Cosmos DB, virtual machines and Azure Resource Manager.

   Control plane unresponsiveHigh error rateService outage

   Trigger

   At 08:41 UTC a lightning strike on electrical infrastructure about 18 miles away caused a utility voltage sag that shut down the cooling chillers of datacenters in one Australia East availability zone; 13 chillers failed to restart automatically and five could not be restarted, so two data halls overheated and their infrastructure was shut down.

   Root cause

   Cloud provider outage

   Component

   AKS control planeApplication database

   Contributing factor

   Single point of failureExcessive blast radius

   Detection

   Cosmos DB impact was detected by monitoring at 10:47 UTC, first automated communications went to Azure Service Health at 10:48 UTC, the public Azure Status page was updated at 11:30 UTC, and all subscriptions in Australia East were sent portal communications at 11:36 UTC.

   Remediation

   • shut down the remaining networking, compute and storage in the two affected data halls so the chilled water loop could cool down
   • restarted the five chillers manually at 12:12 UTC
   • restored power to all hardware by 15:10 UTC and brought infrastructure back in phases
   • restored AKS operations through the recovery of the SQL Database operation queue, with no other mitigation

   Action items

   • AKS: convert all operation queue SQL Database databases to be zone redundant (estimated September 2023)
   • AKS: replace all cross-region SQL Database queue usage with zone-redundant Service Bus queues (estimated September 2023)
   • Change the control timing logic of the Chiller Management System so chillers do not fail to restart after voltage fluctuations
   • Change the emergency procedure for manual restarts of simultaneous chiller failures from an adjacent sequence to a load-based sequence per data hall
   • Increase technician staffing at the datacenter as a temporary measure for manual chiller restarts
   • Storage: optimise the large-scale recovery process and update troubleshooting guides (estimated December 2023)
   • Azure Service Fabric: improve reliability of SQL Database tenant ring recovery (estimated December 2023)
   • SQL Database: review the trigger criteria of auto-failover groups (estimated October 2023)
   • SQL Database: upgrade internal tooling to enable mass migration of databases (estimated December 2023)
   • Cosmos DB: optimise Service Managed Failover for single-region-write accounts (estimated November 2023)
   • ARM: complete the migration of its storage layer to the zonally redundant architecture (estimated December 2023)
   • Incident management: harden readiness, process and playbook for power-down scenarios (estimated October 2023)

   Lessons

   A control plane spread across availability zones still fails with a zone when one of its dependencies, here the SQL Database operation queue, is not zone redundant. When a second region uses the same database, the failure crosses into that region as well. Workloads already running were not expected to be affected; what stopped was everything that needs the managed service's control plane, such as scaling and cluster changes.

   View case

By root cause2