Cases7 cases

1 to 5 of 7

1. IL-0405 An expired AWS Load Balancer Controller webhook certificate left no healthy targets and took BSEE SaaS down

   PortSwigger2026

   Symptoms

   From 10:00 UTC on 11 January 2026 every BSEE SaaS instance in PortSwigger's US and Canada regions was unavailable: customers could not open the Web UI or start scans. The platform team learned of it only when customers reported it through support at 09:52 UTC the next day.

   Service outageTLS certificate errors

   Trigger

   The upgrade of the AWS Load Balancer Controller from v1.14.1 to v1.16.0 on 28 November 2025 left an orphaned webhook TLS secret that cert-manager could not renew, and the certificate in it expired on 8 January 2026.

   Root cause

   Breaking change in an upgrade

   Component

   Ingress controllerAdmission webhookcert-managerHelmConfigMaps and SecretsCloud load balancer

   Contributing factor

   Change with a delayed effectMonitoring blind spot

   Detection

   Customers reported the outage through support at 09:52 UTC on 12 January 2026, almost 24 hours after impact began, and the platform team began investigating at 10:00 UTC.

   Remediation

   • Deleted the orphaned aws-load-balancer-tls secrets in the US and Canada clusters
   • Redeployed the AWS Load Balancer Controller configuration with Helm
   • Verified that new certificates were generated and the webhooks worked again

   Action items

   • Audit all clusters for orphaned secrets that have no owning Certificate resource and resolve them
   • Add high-level application access alerting for each SaaS cluster from an external probe

   View case
2. IL-0188 Rolling updates on EKS returned 502 errors for about 30 seconds because Kubernetes deleted old pods as soon as new pods passed readiness, before the ALB had marked the new pod targets healthy

   Yonghyun Kim2025

   Symptoms

   Every rolling update of the team's microservices on Amazon EKS, behind an Application Load Balancer, was followed by intermittent 502 and 503 errors for users. A Slack message at 3 a.m. read "배포는 성공했는데, 서비스는 죽었다" (the deployment succeeded, but the service died). Every pod was Ready and Datadog was green while users saw errors.

   High error rateService outage

   Trigger

   A rolling update of a Deployment served through an ALB that registers pod IPs as targets, with no pod readiness gates.

   Root cause

   Faulty deployment

   Component

   Cloud load balancerIngress controllerPod termination

   Contributing factor

   Unverified assumptionUnreviewed defaultsMonitoring blind spot

   Detection

   A Slack message at 3 a.m. reported that the deployment had succeeded but the service was down; Datadog dashboards were green at the time.

   Remediation

   • labelled the namespace with elbv2.k8s.aws/pod-readiness-gate-inject=enabled so the AWS Load Balancer Controller injects pod readiness gates and Kubernetes waits for the ALB target to be healthy before deleting old pods

   Lessons

   A pod being Ready in Kubernetes does not mean the load balancer will send it traffic. Without a readiness gate, a rolling update can delete the old pods while the ALB still considers the new targets unhealthy, and dashboards that track pod status stay green during the errors. Making pods wait longer on shutdown reduced the errors but did not fix the start-up gap and made every deployment much slower; the readiness gate ties the pod's Ready state to the ALB's view of the target.

   View case
3. IL-0170 During a Lunar New Year event, traffic more than three times normal filled the nf_conntrack table on the EKS node running the Istio ingress gateway, dropping packets and taking down Backpackr's web and app services

   Backpackr2025

   Symptoms

   During a Lunar New Year event in January 2024, a developer posted a message in Slack suspecting an outage. While several people were checking it, the problem grew into a full outage of Backpackr's web and app services, and the company decided to stop the event.

   Service outage

   Trigger

   An unexpected traffic surge, more than three times normal, during the Lunar New Year event in January 2024.

   Root cause

   Capacity exhaustion

   Component

   conntrack tableIngress controllerIstio

   Contributing factor

   Single point of failureUnreviewed defaultsMonitoring blind spot

   Detection

   A developer reported a suspected outage in Slack; the outage became total while several people were still confirming it.

   Remediation

   • stopped the Lunar New Year event

   Action items

   • Raise net.netfilter.nf_conntrack_max on all nodes to memory bytes/16384/2, and three times that on Istio nodes, applied by the nodeOptimizer DaemonSet
   • Configure Istio mesh networking so sidecars communicate directly instead of through the ingressGateway
   • Upgrade the Istio nodes from c6.xlarge (12.5 Gbps) to n-type instances with up to 25 Gbps of network bandwidth
   • Strengthen monitoring with ENA network bandwidth and packet drops, detailed Istio ingressGateway and sidecar metrics, and CPU, memory and saturation

   Lessons

   When every request in a cluster goes through one ingress gateway node, that node's connection tracking table and network bandwidth set the limit for the whole service. The default nf_conntrack table size was too small for three times normal traffic, and once it filled, packets were dropped. After the outage Backpackr strengthened its monitoring of network bandwidth, packet drops and the Istio components.

   View case
4. IL-0203 A routine Kubernetes cluster system update made the AWS Load Balancer Controller fail, so new pods were never registered with the ALB and Honeycomb's EU1 ingest and UI went down once the last old pods were replaced

   Honeycomb2024

   Symptoms

   Event ingestion and the Honeycomb UI in EU1 became unavailable at 22:00:10 UTC on April 9, 2024, and the status page reported that the EU1 instance was down. Both the ingestion service and the service behind the web UI stopped at roughly the same moment.

   Service outageStale endpoint routing

   Trigger

   A routine system update to the Kubernetes cluster, rolled out earlier on April 9, followed by a regular deployment that replaced pods one at a time.

   Root cause

   Breaking change in an upgrade

   Component

   Ingress controllerCloud load balancer

   Contributing factor

   Monitoring blind spotUnrepresentative stagingChange with a delayed effect

   Detection

   The first status post, saying the EU1 instance was down, went up at 15:08 PDT (22:08 UTC), about 8 minutes after the outage began. There was no alerting on the AWS Load Balancer Controller.

   Remediation

   • Restarted the AWS Load Balancer Controller
   • Rolled back the Kubernetes cluster system update

   Action items

   • Find the exact cause of the failure so the system update can be deployed safely
   • Add monitoring and alerting on the AWS Load Balancer Controller so on-call engineers learn of a failure quickly and can pause deployments

   Lessons

   A rolling deployment can look healthy while the component that wires new pods into the load balancer is broken; the failure only shows when the last old pod goes away. Honeycomb now treats the AWS Load Balancer Controller as a critical component that needs its own alerting, so deployments can be paused before they remove the last pods that still receive traffic. Extensive testing in development and staging did not reveal the bad interaction.

   View case
5. IL-0522 An ingress-nginx chart upgrade deleted the jenkins.io Ingress and Fastly served HTTP/503 errors for hours

   Jenkins project2021

   Symptoms

   At 11:32 UTC on 18 November 2021, a user reported in the jenkinsci/jenkins Gitter channel that https://www.jenkins.io/doc/pipeline/steps/ was answering HTTP/503 errors with the message "Guru meditation" from Fastly's varnish.

   Service outageResources deleted

   Trigger

   The ingress-nginx Helm chart was upgraded from 4.0.6 to 4.0.8 at 10:42 UTC, and the new chart added an admission webhook rule that forbids Nginx configuration blocks in Ingress annotations.

   Root cause

   Breaking change in an upgrade

   Component

   Ingress controllerAdmission webhookHelmCDN and edge network

   Contributing factor

   Unverified assumptionCache-masked failureMonitoring blind spotHarmful manual action

   Detection

   A user reported in the jenkinsci/jenkins Gitter channel at 11:32 UTC that a jenkins.io page answered HTTP/503 errors, and status.jenkins.io reported the incident at 11:49 UTC.

   Remediation

   • Disabled the automated systems, rolled the ingress-nginx chart back to 4.0.6 and deleted the admission webhook by hand
   • Removed the forbidden annotations from the jenkins.io configuration
   • Upgraded the jenkins.io Helm chart to the last version known to work with ingress-nginx 4.0.8
   • Redeployed the jenkins.io Helm chart through the automated system and told Fastly to drop all cached pages

   Action items

   • Always read the changelog in depth when updating the ingress controllers, with two people pairing in real time
   • Add custom Datadog monitoring for www.origin.jenkins.io so that such an outage is detected
   • Make the monitor send the Host header www.jenkins.io so it is not redirected to Fastly
   • Check a set of pages, such as the pipeline steps page, not only the front page
   • Consider an ephemeral k3s end-to-end test before deploying to production

   Lessons

   Trusting a patch version of a Helm chart for the Ingress controller without reading its changelog in depth let a new admission rule remove the jenkins.io Ingress in production. Without monitoring on origin.jenkins.io, a user found the outage. A complete staging cluster with the same DNS setup would have caught the problem before production.

   View case

By root cause4