Cases2 cases

1 to 2 of 2

1. IL-0138 A failed Nvidia driver build left broken kernel packages on the only Kubernetes master node, which hit a kernel panic on reboot after a power outage and took the homelab cluster down for six days

   Barush Mendez2025

   Symptoms

   Every service in the homelab Kubernetes cluster stopped answering: the V-Rising server, Grafana, Jellyfin and Linkding were all unreachable, and the Kubernetes API was down, so the cluster could not be managed at all. The outage was found by hand, about 3 hours after it began, when someone tried to use the services.

   Control plane unresponsiveService outageMonitoring outage

   Trigger

   A power outage forced the Kubernetes master node to reboot.

   Root cause

   Software defect

   Component

   GPU driverLinux kernelKubernetes API server

   Contributing factor

   Ignored early signalChange with a delayed effectSingle point of failureMonitoring blind spot

   Detection

   Manually, when someone tried to access the services; there were no automated alerts.

   Remediation

   • Connected a monitor to the master node and read the boot logs, which showed the kernel panic
   • Booted the previous kernel version, which brought the system back
   • Removed the broken Nvidia packages with sudo apt-get remove --purge '^nvidia-.*' and ran sudo dpkg --configure -a
   • Found remaining broken packages with dpkg -l | grep -v ^ii and removed them by hand
   • Ran sudo apt-get install -f and reinstalled linux-headers-$(uname -r)
   • Rebooted and confirmed the kernel panic was gone

   Action items

   • Make sure GPU driver installations fully succeed, or revert immediately when they fail
   • Move the cluster to a high-availability control plane
   • Expose the Kubernetes API through a load balancer in the HA setup
   • Set up a ticketing system to record incidents and their resolution
   • Write predefined troubleshooting workflows to shorten response time
   • Add infrastructure monitoring such as Prometheus and Grafana
   • Add blackbox HTTP and TCP checks from outside the cluster for critical services

   Lessons

   A driver installation that fails half-way can leave kernel packages broken without any visible effect until the next reboot, which may come weeks later and at the worst time. A failed DKMS build should be fixed or reverted at once. With a single master node and no monitoring from outside the cluster, one unbootable machine meant a total outage that nobody was told about; the fix itself was simple once the boot logs were seen.

   View case
2. IL-0059 Single-master Kubernetes control plane kept dying because the kubelet restarted a healthy etcd on a failing kubeadm liveness probe

   NRE Labs2018

   Symptoms

   The daily NRE Labs statistics showed lesson activity collapsing, and kubectl could not reach the cluster: `The connection to the server 1.2.3.4:6443 was refused - did you specify the right host or port?`

   Control plane unresponsiveProbe failuresService outage

   Trigger

   Unknown. The liveness probe that kubeadm writes into the etcd static pod manifest (an `etcdctl get foo` against 127.0.0.1:2379, failureThreshold 8, timeoutSeconds 15) started failing. The author first suspected GCP maintenance the night before, but could not reproduce the probe failure by hand and does not know why it began.

   Root cause

   unknown

   Component

   etcdkubeletKubernetes API server

   Contributing factor

   Single point of failureUnreviewed defaultsHarmful manual actionIgnored early signalMonitoring blind spot

   Detection

   The author saw lesson activity drop in the daily NRE Labs statistics during his morning routine.

   Remediation

   • removed the liveness probe section from the kubeadm-generated etcd static pod manifest and applied it between etcd restarts

   Action items

   • Add monitoring, especially for the single-node master
   • Run a basic "down for maintenance" page in Google Cloud Functions that points to Twitter for updates, to redirect to during outages

   Lessons

   Because all of the infrastructure is managed as code, the cluster could be rebuilt quickly, but destroying it before finding the cause also destroyed the evidence. Monitoring matters, especially with a single-node master. Read the restart counts in kubectl output, not just the Running status. Remember the fundamentals instead of expecting the issue to be more complicated than it is, and do not let the urgency of an outage push you into hasty decisions. Put up a maintenance page instead of leaving the site failing halfway.

   View case

By root cause2