Cases8 cases

1 to 5 of 8

1. IL-0071 Worker node running out of inodes while disk space looked fine, because containerd kept a full node_modules tree in each of several image layer snapshots

   Onkar Raghunath Shelke2026

   Symptoms

   A Kubernetes worker node paged with NodeFilesystemFilesFillingUp, the node_exporter mixin alert that predicts a filesystem will run out of inodes. The engineer checked disk space first: df -h showed the root filesystem 83% used, 103G used and 22G available. df -i showed inodes 67% used, 11M used and 5.3M free.

   Node disk full

   Trigger

   Several versions of a single-stage Node.js image, each shipping more than 40,000 files, were held on the node; containerd unpacked every layer with a distinct digest into its own snapshot, each with a full copy of node_modules.

   Root cause

   Capacity exhaustion

   Component

   Node root diskkubeletContainer runtime

   Contributing factor

   Unreviewed defaultsMonitoring blind spotUnknown limit

   Detection

   The NodeFilesystemFilesFillingUp alert from the node_exporter mixin fired on the predicted inode trend while inode use was at 67%.

   Action items

   • Build the image in multiple stages so the final image contains only the compiled assets
   • Add a flat alert on root filesystem inode use above 80% for 30 minutes alongside the predictive alert
   • Put a Prometheus query on a dashboard that shows, per node, inode usage minus disk usage, sorted from the highest
   • Remove unused images from nodes with crictl rmi --prune to free old snapshots

   Lessons

   kubelet's background cleanup works on bytes only. A workload heavy in small files gets no early intervention for inodes, and the first thing kubelet does at 5% free inodes is evict pods. Watch inode use on nodes separately from disk use, and keep dependency trees out of runtime images.

   View case
2. IL-0112 The daily node rollover put DFDS's EKS nodes on an AMI later recalled for a kernel issue, causing "PLEG is not healthy" NodeNotReady flaps and pod network timeouts

   DFDS2022

   Symptoms

   On 2022-10-31 a planned upgrade of the vpc-cni EKS add-on, started from the deployment pipeline at 13:45 UTC, timed out at 14:10. Only about 10 of the 45 aws-node pods had upgraded, 5 were stuck in Terminating and the other 30 had not been attempted.

   Node NotReadyUpgrade stallIntermittent timeoutsIntermittent connection failures

   Trigger

   At 07:30 UTC on 2022-10-31 the daily node rollover replaced the existing nodes with nodes built from AMI v20221027, the latest AWS EKS node AMI, released on 2022-10-29 and later recalled because of a kernel issue.

   Root cause

   Software defect

   Component

   Node operating system imageLinux kernelkubeletAWS VPC CNINode launch templateTerraform

   Contributing factor

   No staged rolloutAutomation amplificationOverlapping failuresMonitoring blind spotNo health probes

   Detection

   The team noticed nodes flapping between NodeNotReady and NodeReady ("KubeletNotReady PLEG is not healthy") at 14:30 UTC while watching the stalled vpc-cni upgrade, about seven hours after the rollover. Time to detection was 7 hours. Alerting did not catch the NodeNotReady events or the socket growth.

   Remediation

   • cordoned, drained and deleted 15 stuck nodes one at a time to complete the vpc-cni upgrade
   • changed the Terraform infrastructure-modules so a specific AMI could be set
   • rolled the EC2 Auto Scaling group launch configuration back to the previous known good AMI through the pipeline

   Action items

   • Reach out to teams with suggestions about readiness and liveness probes
   • Create a dashboard for readiness and liveness probe coverage
   • Write a wiki article on readiness and liveness probes and their usefulness
   • Modify infrastructure-modules to allow specifying a particular AMI
   • Schedule a discussion on whether to take the latest AMI immediately and how to test new AMIs before they are deployed
   • Implement alerting on abnormal NodeNotReady events and on increased socket use
   • Create a learning path for Kubernetes within the team
   • Collect logs from nodes centrally
   • Create a Prometheus exporter that retrieves the latest available AMI, with a dashboard and alerts

   Lessons

   When a new node AMI has just been rolled out, upgrading other cluster components on the same day makes it hard to tell which change is causing trouble; here the vpc-cni upgrade on the same day confused matters. Taking the latest AMI automatically with no way to pin one meant a rollback first needed a Terraform change. The team also concluded that it needs better communication paths with application teams during incidents.

   View case
3. IL-0012 CPU limits and an unpatched kernel CFS quota bug throttled multi-threaded services into stalls, failed health checks and timeouts

   Omio2020

   Symptoms

   For about six months, applications on Omio's Google Kubernetes Engine clusters stalled at random: they got stuck, stopped answering health check requests or lost network connections, and nothing the team looked at explained why.

   CPU throttlingProbe failuresHigh error rateHigh latencyIntermittent timeoutsIntermittent connection failures

   Trigger

   Multi-threaded workloads running with CPU limits on nodes whose kernel did not yet have the fix for a known CFS quota bug that causes unnecessary throttling.

   Root cause

   Software defect

   Component

   Container CPU limitLinux kernelkubelet

   Contributing factor

   Unknown limitMonitoring blind spotUnpatched known bug

   Detection

   Months of random stalls and failed health checks led the team to read the cgroup cpu.stat throttling counters inside the pods, which showed far more throttling than the limits should allow.

   Remediation

   • removed CPU limits until the kernel with the CFS bug fix was deployed across all clusters

   Action items

   • Deploy the kernel with the CFS quota bug fix across all clusters
   • Monitor utilisation, saturation and error metrics, API latency and error rates to confirm the change behaves as expected

   Lessons

   A CPU limit is a time quota per 100 ms period, not a share of cores, so a multi-threaded container can be stopped for most of each period long before it uses the cores it was given, and a kernel bug can make that worse. Throttling is invisible in standard Kubernetes metrics and has to be read from the cgroup counters. Removing limits trades away protection against a container that takes a whole node, which is only acceptable when runtimes are tuned.

   View case
4. IL-0008 An unresponsive OPA validating webhook crash-looped the API server during a GKE master upgrade, and node auto-repair then recreated every node

   Jetstack2019

   Symptoms

   Jetstack was upgrading the master of a development cluster that many teams use to test their apps during the working day, a regional Google Kubernetes Engine (GKE) cluster in europe-west1. The upgrade ran through Jetstack's GKE Terraform pipeline and did not finish before the 20-minute Terraform timeout, while the GKE console still showed the cluster as upgrading.

   Upgrade stallControl plane unresponsiveNode recreation loopService outage

   Trigger

   A planned master upgrade of the shared development cluster. The same upgrade had been done on another pre-production environment earlier that day, and no API downtime was expected.

   Root cause

   Configuration change

   Component

   Admission webhookGKE control planeKubernetes API serverkubelet

   Contributing factor

   Excessive blast radiusNo health probesMonitoring blind spotAutomation amplification

   Detection

   The first sign was the master upgrade missing the 20-minute Terraform timeout; re-running the pipeline returned the kube-apiserver unhealthy error. The cause was identified with the help of Google Support.

   Remediation

   • Deleted the OPA ValidatingAdmissionWebhook resource during a window of API server access

   Action items

   • Limit the OPA webhook to the namespaces where the policy applies and development teams have access
   • Enable the webhook only for Ingress and Service resources, the only resources the policy validates
   • Add a liveness probe so OPA is restarted when it stops responding, and update the OPA documentation
   • Follow the open upstream Kubernetes issue about this behaviour

   Lessons

   With alerting on API server response times, the team might have seen CREATE and UPDATE requests slow down across the board as soon as the OPA-backed webhook was first deployed. Every workload needs probes: OPA looked so simple to deploy that the team skipped the Helm chart, which adds a livenessProbe for the admission controller containers among other adjustments to the tutorial configuration. Others had hit the same problem, and an upstream issue to improve it was still open.

   View case
5. IL-0035 Worker nodes went NotReady after a new ElastAlert rule without memory limits used up node memory

   NU.nl2019

   Symptoms

   The NU.nl development team got reports that several services on one of its Kubernetes clusters behaved erratically: occasional error pages, slow responses and timeouts. The affected services were mostly internal tools and dashboards.

   Node NotReadyHigh error rateHigh latencyIntermittent timeoutsMonitoring outageOOMKilled

   Trigger

   A new ElastAlert rule, deployed shortly before from the command line, that fired if the Cloudfront-* Elasticsearch indexes stopped receiving documents; those indexes take a few million requests per hour, and the rule made ElastAlert's memory grow without bound.

   Root cause

   Configuration change

   Component

   Container memory limitkubeletPrometheus

   Contributing factor

   No resource requests or limitsUnreviewed defaultsNo alert on limitMonitoring blind spotExcessive blast radius

   Detection

   Users reported error pages, slow responses and timeouts from several services; no alert fired.

   Remediation

   • terminated the NotReady nodes one by one so the auto-scaling group replaced them (the new nodes also went NotReady, but Prometheus and Grafana landed on a stable node)
   • found the ElastAlert pods' memory growth on the Grafana pod memory dashboard
   • fixed the ElastAlert problem that caused the memory growth

   Action items

   • Define alerts on resource usage such as CPU, memory and disk space
   • Keep researching an alerting strategy that combines Elasticsearch, Prometheus Alertmanager and New Relic
   • Consider exporting metrics out of the cluster and running Grafana outside it, on EC2 or a separate Kubernetes cluster
   • Either visualise the important metrics in the ELK stack or make Prometheus and Grafana more available, and improve the metrics strategy
   • Set resource limits for ElastAlert through the Helm values
   • Configure namespaces with default memory requests and limits
   • Isolate customer-facing workloads from build, logging and monitoring workloads (a dedicated node group, or later a separate tools cluster)
   • Deploy everything through automation such as Jenkins pipelines, and consider a GitOps approach
   • Deploy through a pipeline that includes a smoke test step
   • Make Kubernetes and cloud infrastructure work part of the team's sprints, picked up by all team members while pairing with more experienced members, and hold workshops that go deep into specific topics

   Lessons

   Fixing the root cause covers only a small part of what an incident can teach; the chain of smaller failures around it is where most of the learning is. A pod without a memory limit can take whole nodes down, so limits need defaults at the namespace level. Monitoring that runs inside the cluster it watches goes blind with it. Changes installed by hand from the command line leave the rest of the team without a record of what changed.

   View case

By root cause4