Cases10 cases

1 to 5 of 10

1. IL-0166 A compute host update removed the credential parser used to decode StackScripts, so new Linodes and every new LKE and LKE-E node failed to boot and autoscaling and node recycling failed in all regions

   Linode2026

   Symptoms

   Linodes deployed with StackScripts failed to deploy and could not boot. Every newly created Linode Kubernetes Engine (LKE) and LKE-E node relies on StackScripts, so LKE autoscaling and node recycling failed as well, in all regions.

   Scale-up failure

   Trigger

   A recent update on the compute hosts removed a credential parser that is used when decoding StackScripts.

   Root cause

   Faulty deployment

   Component

   Cluster autoscalerNode pool

   Contributing factor

   –

   Detection

   The issue was identified at 18:18 UTC on 2026-05-15. The first status post went up at 00:42 UTC on 2026-05-16.

   Remediation

   • tested and applied a rollback starting at 01:10 UTC on 2026-05-16, and failures dropped from 01:20 UTC

   Lessons

   Removing a credential parser from the compute hosts broke the boot of every Linode deployed with StackScripts, and every new LKE and LKE-E node is one of them, so node creation, autoscaling and node recycling stopped in all regions. The rollback reduced failures ten minutes after testing began.

   View case
2. IL-0158 An expired credential caused authentication failures that stopped LKE and LKE-E from deploying clusters and nodes in all regions, which also blocked node recycling and cluster autoscaling

   Linode2026

   Symptoms

   From 11:45 UTC on 16 April 2026, customers of Linode Kubernetes Engine (LKE) and Linode Kubernetes Engine Enterprise (LKE-E) could not deploy new clusters or add new nodes to existing clusters. Because no new node could be deployed, node recycling and cluster autoscaling did not work either. The problem hit every region where LKE runs.

   Deploys failingScale-up failureCredentials unavailable

   Trigger

   A credential expired, which caused authentication failures when LKE and LKE-E deployed clusters and nodes. One status update describes it as an expired certificate.

   Root cause

   Certificate or credential expiry

   Component

   Node pool

   Contributing factor

   –

   Detection

   The first status page update, saying the team was investigating an emerging issue affecting LKE and LKE-E in all regions, was posted at 13:20 UTC.

   Remediation

   • created new credentials and deployed them, rotating the expired credential (certificate)

   Action items

   • Investigate what led to the credential expiry and take preventive actions

   Lessons

   One expired credential stopped every operation that needs a new node, in all regions at once: new clusters, added nodes, node recycling and autoscaling.

   View case
3. IL-0101 After Google forced a GKE control plane upgrade to 1.33.2 at a deprecation deadline, no new node could initialise, so autoscaling and spot node replacement stopped for 15 hours

   Wealthy2025sev1

   Symptoms

   Nodes that already existed kept running, but every new node, spot or standard, on either v1.32 or v1.33, failed to initialise and could not join the cluster. Spot nodes that were preempted and recreated never came back, so services degraded progressively: background workers on spot instances, reporting services and order allocation stopped completely, and the APIs on existing nodes kept answering but could not scale for load spikes.

   Scale-up failureContainer crash loopService outageDNS resolution failures

   Trigger

   Google upgraded the GKE control plane from v1.32.x to v1.33.2 at the version deprecation deadline, although auto-upgrade was disabled on the node pools.

   Root cause

   Breaking change in an upgrade

   Component

   GKE control planeNode poolClient-side DNS resolver and cachePersistent volumes and stateful setsConfigMaps and Secrets

   Contributing factor

   Deferred upgradesSingle point of failureIneffective rollbackNo headroom

   Remediation

   • Created a new GKE cluster at v1.33, the version of the forced upgrade
   • Upgraded Istio to 1.27.1 for Kubernetes 1.33 compatibility
   • Updated the cert-manager configuration for Kubernetes 1.33
   • Migrated all production workloads to the new cluster and verified pod scheduling, DNS resolution, PVC mounting and external integrations
   • Decommissioned the broken cluster

   Action items

   • Configure all clusters to use the GKE stable release channel
   • Implement a separate management cluster for Argo CD, monitoring and other control components (Q4 2025)
   • Review spot instance usage for critical workloads and add on-demand fallback pools
   • Document the SRE upgrade procedure: management cluster first, production after a monitoring period of several days
   • Document a Kubernetes, Istio and cert-manager compatibility matrix
   • Create an automated upgrade testing pipeline
   • Reserve static IPs for quick migrations
   • Pin versions of Istio, cert-manager, CSI and DNS addons
   • Stay current with stable releases and regularly check GKE alerts and announcements to avoid deprecation deadlines

   Lessons

   GKE upgrades the control plane at a version's deprecation deadline even when auto-upgrade is disabled, so staying inside the supported version window is how to avoid a forced upgrade. A control plane upgrade can leave existing nodes healthy while every new node fails, and spot nodes that cannot rejoin after preemption turn this into cascading failures. Relying heavily on spot instances for critical workers turned a node join failure into a progressive outage. Kubernetes upgrades have to be planned together with dependent components such as Istio and cert-manager, and without a standby cluster on the same provider there was no immediate failover; the only recovery left was building a new cluster.

   View case
4. IL-0147 AKS nodes behind an HTTP proxy failed to provision with CSE exit code 31 on 202508 node images, because a refactoring stopped the proxy from being used when downloading uncached Kubernetes binaries

   Microsoft Azure2025

   Symptoms

   Creating or scaling a node pool on AKS 1.31.8 failed: the VMSS instances never finished provisioning. This started after planned maintenance moved the node image from 202507.* to 202508.*, in a cluster where nodes must send all outbound traffic through an internal HTTP/HTTPS proxy and direct egress is blocked. It happened with both Ubuntu and AzureLinux images.

   Scale-up failureUpgrade stall

   Trigger

   A node image auto-upgrade from 202507.* to 202508.* during planned maintenance, on clusters whose Kubernetes patch version was not pre-cached in the new image.

   Root cause

   Software defect

   Component

   Node operating system imageNode pool

   Contributing factor

   Cache-masked failureAutomation amplification

   Detection

   The customer saw VMSS instance provisioning fail with a vmssCSE error in the VMSS activity logs and reported it as a GitHub issue.

   Remediation

   • The customer pinned the node image to a 202507.* snapshot on clusters running 1.31.8
   • The customer upgraded clusters to AKS 1.31.9 or 1.31.10, whose binaries are cached in the 202508.* images
   • The AKS team hot-patched VHD 20250811 so the proxy configuration is used for uncached binary downloads and made it globally available in public regions on 2025-09-04; it also announced the hotfix for VHD 20250820
   • The AKS team told users to reimage their nodes with az aks nodepool upgrade --node-image-only to pick up the hotfixed image

   Action items

   • Apply the proxy fix in all future VHDs

   Lessons

   A bootstrap path that runs only when an artefact is missing from a cache is easy to break without noticing: here only clusters on Kubernetes versions not pre-cached in the node image ever downloaded binaries, so only they met the proxy regression. Testing node provisioning behind a mandatory egress proxy, on older patch versions as well as the newest, would exercise that path. For clusters with restricted egress, pinning the node image or moving to a Kubernetes version cached in the image were both quick workarounds while the fix was shipped.

   View case
5. IL-0231 Deleting EKS managed node groups also deleted Karpenter's instance profile, and every Stytch worker node shut down

   Stytch2023

   Symptoms

   On 23 February 2023 Stytch's EKS worker nodes went Ready:Unknown one after another, Karpenter failed to launch replacement nodes, and with fewer and fewer pods scheduled the Live Stytch API went down for 14 minutes, returning 5XX on every call.

   Node NotReadyScale-up failurePod evictionPods PendingService outage

   Trigger

   At 14:21 UTC Stytch landed a change to remove unused EKS managed node groups, because it had decided to run its data plane applications fully on nodes provisioned by Karpenter. Because Crossplane resources use an orphan deletion policy, engineers deleted the node groups in the AWS console, first in staging and then in production.

   Root cause

   Configuration change

   Component

   KarpenterNode poolConfiguration templating

   Contributing factor

   Unverified assumptionShared credentialChange with a delayed effectIgnored early signal

   Detection

   Low-urgency alerts that Karpenter could not find the instance profile fired in staging at 16:06 UTC and in production at 17:48 UTC but were not treated as an incident. The incident process started at 20:26 UTC when node launch failures spiked the Karpenter error rate, and Kubernetes monitoring alerts in production followed at 20:44 UTC. The support team flagged the outage at 21:14 UTC.

   Remediation

   • Reverted the node group deletion, which recreated the managed node groups
   • Manually scaled up one of the Live API node groups with more and much larger nodes and removed its taints
   • Removed node selectors from the applications one after another so their pods could be scheduled

   Action items

   • Treat Karpenter errors as high-urgency alerts that page the on-call engineer
   • Tune cluster alerting thresholds to send a high-urgency page earlier
   • Add alerts for nodes that stay NotReady or Unknown for long periods
   • Raise the thresholds of other deployment alerts, such as unschedulable pods and replicas not available
   • Give Karpenter its own IAM instance profile, separate from the one used by the node groups
   • Separate other AWS resources that were shared between uses, specifically IAM and security groups
   • Rework the EKS and Karpenter configuration so system instance profiles are unique, static per cluster and generated by Karpenter
   • Introduce a cloud visualization tool for engineers making infrastructure changes
   • Add live system and product metrics to the status page
   • Ask AWS to confirm the undocumented actions and side effects of deleting a node group
   • Correct the shared use of IAM roles and security groups across the infrastructure

   Lessons

   The IAM role for Karpenter's self-managed nodes should never have been the same as the one for the managed node groups; sharing it is what let the node group deletion break Karpenter, and the roles had been left combined for speed and simplicity when Karpenter was first set up. The hours-long delay between the configuration change and its effect made the incident hard to assess, and AWS confirmed that this delay is expected, so Stytch will allow for it in future IAM instance profile changes.

   View case

By root cause8