Cases12 cases

1 to 5 of 12

1. IL-0512 xpro.mit.edu returned 503 for an hour when its Kubernetes/APISIX origin certificate expired after renewal failed

   MIT Open Learning2026sev1

   Symptoms

   At 3:38 PM EDT on 3 June 2026, alerts fired because both the xPRO production CMS and the main xPRO site at https://xpro.mit.edu were returning 503 errors. Fastly, in front of the site, could not connect to the Kubernetes/APISIX origin, because the origin certificate for xpro-web.odl.mit.edu had expired at 3:29 PM EDT.

   Service outageTLS certificate errors

   Trigger

   The origin certificate xpro-cert for xpro-web.odl.mit.edu, issued on 2026-03-05 with a 90-day validity period, expired at 3:29 PM EDT on 3 June 2026.

   Root cause

   Configuration change

   Component

   cert-managerCDN and edge networkAuthoritative DNS servers and records

   Contributing factor

   No configuration testsMonitoring blind spotChange with a delayed effect

   Detection

   Alerts for the xPRO production CMS and the main xPRO site fired at 3:38 PM EDT on the 503 errors, and a Rootly incident was created at 4:08 PM EDT.

   Remediation

   • Deleted and recreated the stale cert-manager certificate resources so that cert-manager issued a fresh origin certificate

   Action items

   • Remove the backend origin domain from the non-OpenEdX xPRO Fastly TLS subscription, so Fastly manages only xpro.mit.edu
   • Deploy the Pulumi update for the xPRO application in Production
   • Trigger cert-manager renewal of the xPRO certificate after the conflicting Fastly validation CNAME is removed
   • Consider tests or policy checks that keep cert-manager-managed origin domains out of Fastly TLS subscriptions
   • Consider alerting earlier on failed cert-manager CertificateRequests and Orders, so stale ACME failures are found before the certificate expires

   Lessons

   Reading the outage as a failed cert-manager ACME renewal was true but incomplete; the missing part was that Fastly had been set to manage validation for a backend origin domain that belonged to cert-manager. The team concluded that TLS certificates and DNS validation records need guardrails around ownership, and that public Fastly frontend domains and Kubernetes/APISIX origin domains must not be treated as interchangeable service domains in TLS automation.

   View case
2. IL-0405 An expired AWS Load Balancer Controller webhook certificate left no healthy targets and took BSEE SaaS down

   PortSwigger2026

   Symptoms

   From 10:00 UTC on 11 January 2026 every BSEE SaaS instance in PortSwigger's US and Canada regions was unavailable: customers could not open the Web UI or start scans. The platform team learned of it only when customers reported it through support at 09:52 UTC the next day.

   Service outageTLS certificate errors

   Trigger

   The upgrade of the AWS Load Balancer Controller from v1.14.1 to v1.16.0 on 28 November 2025 left an orphaned webhook TLS secret that cert-manager could not renew, and the certificate in it expired on 8 January 2026.

   Root cause

   Breaking change in an upgrade

   Component

   Ingress controllerAdmission webhookcert-managerHelmConfigMaps and SecretsCloud load balancer

   Contributing factor

   Change with a delayed effectMonitoring blind spot

   Detection

   Customers reported the outage through support at 09:52 UTC on 12 January 2026, almost 24 hours after impact began, and the platform team began investigating at 10:00 UTC.

   Remediation

   • Deleted the orphaned aws-load-balancer-tls secrets in the US and Canada clusters
   • Redeployed the AWS Load Balancer Controller configuration with Helm
   • Verified that new certificates were generated and the webhooks worked again

   Action items

   • Audit all clusters for orphaned secrets that have no owning Certificate resource and resolve them
   • Add high-level application access alerting for each SaaS cluster from an external probe

   View case
3. IL-0138 A failed Nvidia driver build left broken kernel packages on the only Kubernetes master node, which hit a kernel panic on reboot after a power outage and took the homelab cluster down for six days

   Barush Mendez2025

   Symptoms

   Every service in the homelab Kubernetes cluster stopped answering: the V-Rising server, Grafana, Jellyfin and Linkding were all unreachable, and the Kubernetes API was down, so the cluster could not be managed at all. The outage was found by hand, about 3 hours after it began, when someone tried to use the services.

   Control plane unresponsiveService outageMonitoring outage

   Trigger

   A power outage forced the Kubernetes master node to reboot.

   Root cause

   Software defect

   Component

   GPU driverLinux kernelKubernetes API server

   Contributing factor

   Ignored early signalChange with a delayed effectSingle point of failureMonitoring blind spot

   Detection

   Manually, when someone tried to access the services; there were no automated alerts.

   Remediation

   • Connected a monitor to the master node and read the boot logs, which showed the kernel panic
   • Booted the previous kernel version, which brought the system back
   • Removed the broken Nvidia packages with sudo apt-get remove --purge '^nvidia-.*' and ran sudo dpkg --configure -a
   • Found remaining broken packages with dpkg -l | grep -v ^ii and removed them by hand
   • Ran sudo apt-get install -f and reinstalled linux-headers-$(uname -r)
   • Rebooted and confirmed the kernel panic was gone

   Action items

   • Make sure GPU driver installations fully succeed, or revert immediately when they fail
   • Move the cluster to a high-availability control plane
   • Expose the Kubernetes API through a load balancer in the HA setup
   • Set up a ticketing system to record incidents and their resolution
   • Write predefined troubleshooting workflows to shorten response time
   • Add infrastructure monitoring such as Prometheus and Grafana
   • Add blackbox HTTP and TCP checks from outside the cluster for critical services

   Lessons

   A driver installation that fails half-way can leave kernel packages broken without any visible effect until the next reboot, which may come weeks later and at the worst time. A failed DKMS build should be fixed or reverted at once. With a single master node and no monitoring from outside the cluster, one unbootable machine meant a total outage that nobody was told about; the fix itself was simple once the boot logs were seen.

   View case
4. IL-0203 A routine Kubernetes cluster system update made the AWS Load Balancer Controller fail, so new pods were never registered with the ALB and Honeycomb's EU1 ingest and UI went down once the last old pods were replaced

   Honeycomb2024

   Symptoms

   Event ingestion and the Honeycomb UI in EU1 became unavailable at 22:00:10 UTC on April 9, 2024, and the status page reported that the EU1 instance was down. Both the ingestion service and the service behind the web UI stopped at roughly the same moment.

   Service outageStale endpoint routing

   Trigger

   A routine system update to the Kubernetes cluster, rolled out earlier on April 9, followed by a regular deployment that replaced pods one at a time.

   Root cause

   Breaking change in an upgrade

   Component

   Ingress controllerCloud load balancer

   Contributing factor

   Monitoring blind spotUnrepresentative stagingChange with a delayed effect

   Detection

   The first status post, saying the EU1 instance was down, went up at 15:08 PDT (22:08 UTC), about 8 minutes after the outage began. There was no alerting on the AWS Load Balancer Controller.

   Remediation

   • Restarted the AWS Load Balancer Controller
   • Rolled back the Kubernetes cluster system update

   Action items

   • Find the exact cause of the failure so the system update can be deployed safely
   • Add monitoring and alerting on the AWS Load Balancer Controller so on-call engineers learn of a failure quickly and can pause deployments

   Lessons

   A rolling deployment can look healthy while the component that wires new pods into the load balancer is broken; the failure only shows when the last old pod goes away. Honeycomb now treats the AWS Load Balancer Controller as a critical component that needs its own alerting, so deployments can be paused before they remove the last pods that still receive traffic. Extensive testing in development and staging did not reveal the bad interaction.

   View case
5. IL-0153 DOKS worker nodes went NotReady at 06:00 UTC on three days because a systemd timer in the Debian image ran apt upgrade and killed it mid kernel upgrade, breaking node networking

   DigitalOcean2023

   Symptoms

   Customers of DigitalOcean Managed Kubernetes (DOKS) saw worker nodes go NotReady between 06:00 and 07:00 UTC and stay unavailable, taking down the services on them, until the nodes were replaced or rebooted; some nodes needed several replacements or reboots. The first sporadic reports on October 8 said replacing the node fixed it. The same thing happened again around 06:00 UTC on October 9, more widely and across many regions, and again on October 10. Only clusters on versions 1.27.6-do.0 and 1.28.2-do.0 were affected.

   Node NotReadyService outage

   Trigger

   A systemd timer in the DigitalOcean Debian image started apt upgrade daily at 06:00 UTC, with a random delay of up to 60 minutes.

   Root cause

   Configuration change

   Component

   Node operating system imageLinux kernelkubelet

   Contributing factor

   Unreviewed defaultsLimited debug accessChange with a delayed effect

   Detection

   Sporadic customer reports of failed worker nodes arrived at 07:43 UTC on October 8; internal incident response started at 07:10 UTC on October 9 after broader impact across regions.

   Remediation

   • Advised customers to replace or reboot affected worker nodes
   • Arranged SSH and console access to worker nodes while they were healthy, and live-debugged an affected node on October 10
   • Released a DaemonSet to all affected clusters that disables the apt upgrade systemd timer on every worker node
   • Released new node images without the auto-update process

   Action items

   • Disable the timer during node provisioning, then remove the DaemonSet from all clusters
   • Add a check to the internal conformance test suite for new cluster versions that the auto-upgrade process and other unwanted timers stay disabled
   • Support logging into worker nodes even when normal access paths are broken

   Lessons

   An operating system auto-update timer left enabled in a node image can change the kernel and systemd underneath Kubernetes, and a timeout that kills the upgrade half-way can leave a node without networking. Failures that start at the same time every day point to a scheduled job on the nodes, and systemd timers belong on that list next to cron jobs. When the failure takes out a node's network, an investigation that depends on logging into the node stalls; access paths that work while the node is broken shorten diagnosis.

   View case

By root cause4