Cases13 cases

1 to 5 of 13

1. IL-0489 Rejoining a failed node of Magic Pages' three-node MySQL cluster broke its metadata and took customer websites down

   Magic Pages2025

   Symptoms

   On 15 January 2025, from about 09:55 to 11:36 CET, a database outage at Magic Pages took down customer websites. It began when the founder tried to reconnect a failed third node to the high-availability MySQL cluster and the database server reported ambiguous errors about missing metadata information.

   Service outage

   Trigger

   One of the three nodes of the MySQL cluster went down, and reconnecting it failed with errors about missing metadata information.

   Root cause

   Dependency failure

   Component

   DatabasePersistent volumes and stateful sets

   Contributing factor

   Harmful manual actionSingle point of failureMonitoring blind spot

   Remediation

   • Restarted the storage server to fix PVC provisioning
   • Let the MySQL nodes restore and sync with each other for about 45 minutes to rebuild the cluster metadata
   • Cleaned up the corrupted cluster metadata
   • Redeployed MySQL Router

   Action items

   • Monitor the health of the storage system more closely
   • Improve the failover procedures for MySQL Router
   • Investigate and fix the status page so it shows reliable information

   Lessons

   The cluster survived the first node failure as designed and lost no data, but its metadata turned out to be a single point of failure. Better monitoring of PVC health could help prevent similar issues, the 45-minute recovery leaves room for improvement, and the status page has to detect failing customer sites reliably.

   View case
2. IL-0087 After a cold reboot of RKE2 nodes, pods could not get IP addresses because Multus could not reach the Kubernetes API, and further reboots spread the failure to every node

   Fyra Labs2023

   Symptoms

   At around 2 AM ICT on 2023-04-09 the team saw unusual CPU use on one cluster node, which throttled every other service on it and made them fail. They presumed an upstream container runtime bug in containerd and runc and decided to fully reboot the affected nodes, taking the cluster down for maintenance on the assumption that it was not in active use.

   Sustained high node CPUService outage

   Trigger

   A full cold reboot of the nodes that showed unusual CPU use, followed by upgrades and cold reboots of the other nodes.

   Root cause

   unknown

   Component

   Multus meta-CNICalicoContainer runtime

   Contributing factor

   Harmful manual actionUnverified assumption

   Detection

   The team saw unusual CPU use on a node around 2 AM ICT and failing services on the rebooted nodes around 2:30 ICT; developers reported the Terra repositories down at 6:31 ICT.

   Remediation

   • uninstalled Multus and Calico and replaced them with the Cilium CNI
   • rolled back most cluster settings except the CNI

   Lessons

   Rebooting nodes to clear one problem can expose another; here a CNI chain could not reach the API server after a cold start. Repeating the same reboot on more nodes while the first failure was not understood spread the outage from a few nodes to the whole cluster. The team also found that Cilium's real resource use in their cluster was acceptable, contrary to the benchmark they had relied on.

   View case
3. IL-0230 kube-proxy sync failures during a Kubernetes upgrade corrupted node iptables, and CircleCI jobs stopped starting

   CircleCI2023

   Symptoms

   On 14 March 2023 at about 18:00 UTC, communication errors rose on one CircleCI service, and pipelines for all customers began to start late until jobs did not run at all. Within an hour the errors had spread to many services and to every function of the application, including the CircleCI UI and API.

   Service outageIntermittent connection failuresDNS resolution failures

   Trigger

   At about 17:40 UTC on 14 March the infrastructure team resumed the upgrade of the main production Kubernetes cluster with a changed approach for some components, after a first attempt on 13 March had been rolled back. The ongoing upgrade left kubelet and kube-proxy at mismatched versions.

   Root cause

   Breaking change in an upgrade

   Component

   kube-proxykubeletCoreDNSClient-side DNS resolver and cache

   Contributing factor

   Partial rolloutIneffective rollbackMonitoring blind spotHarmful manual action

   Detection

   At 18:00 UTC engineers saw communication errors rise on one service, then job processing delays climbing and job queues backing up across several services. The kube-proxy "Sync failed" errors were found only in the analysis after the incident.

   Remediation

   • Restarted every node in the cluster so each node built a fresh iptables ruleset
   • Restarted a separate pool of dependencies so jobs using contexts or the machine executor ran again
   • Added capacity to work through the backlog of jobs
   • Restarted the RabbitMQ nodes to fix a few corrupted queues

   Action items

   • Improve the Kubernetes upgrade process to limit the risk of future upgrades
   • Add metrics and alerts for kube-proxy sync errors
   • Evaluate ways to make the RabbitMQ infrastructure more resilient

   Lessons

   No single trigger caused the incident. Because networking underlies everything in the cluster, Kubernetes upgrades carry inherent risk, and CircleCI's risk mitigation did not hold up when several events interacted.

   View case
4. IL-0109 A retried node rollover on a DFDS EKS cluster set the Auto Scaling group back to 15 instances, and the default termination policy removed every healthy worker node, leaving the cluster with no nodes

   DFDS2023sev1

   Symptoms

   At 09:33 UTC on 14 February 2023 end users told the platform team that Kubernetes logs were not arriving in CloudWatch as expected. The investigation went through fluentd and found that the nodes were running containerd as their container runtime instead of docker-shim. A scheduled node rollover the day before, at 07:30 UTC on 13 February, had set containerd as the default runtime by accident.

   Service outageResources deletedMonitoring outage

   Trigger

   A scheduled node rollover had accidentally made containerd the default container runtime, which stopped log shipping to CloudWatch; the unscheduled rollover to revert it timed out, and the pipeline run that followed reduced the Auto Scaling group from 30 to 15 instances.

   Root cause

   Configuration change

   Component

   Container runtimeNode launch templateNode poolTerraformTelemetry agent

   Contributing factor

   Automation amplificationUnreviewed defaultsUnrepresentative stagingNo configuration testsNo runbookHarmful manual action

   Detection

   End users reported the missing CloudWatch logs that started the work. The postmortem lists 2 minutes as the time to detection of the node failure.

   Remediation

   • ran the node rollover script to add new nodes, which failed on a timeout from Docker Hub
   • ran the node rollover script a second time, which added new nodes that the load balancer marked healthy at 11:01 UTC

   Action items

   • Document the rollover process, especially what can be done when it goes wrong
   • Investigate options for improving the rollover process
   • Add fluentd log collection to the QA test suite so logs are covered end to end
   • Add alarms for fluentd when too little or no log data is sent
   • Implement a staging environment
   • Implement guards against selecting an invalid container runtime

   Lessons

   When a change goes wrong, rolling back to a known working configuration is safer than rushing a fix, which can make the damage worse. Launching new worker nodes depends on the cloud-init script not failing in any way. The QA configuration differed from production, there was no staging environment, the QA tests did not cover fluentd log collection, and the rollover process had no documentation for when it fails.

   View case
5. IL-0522 An ingress-nginx chart upgrade deleted the jenkins.io Ingress and Fastly served HTTP/503 errors for hours

   Jenkins project2021

   Symptoms

   At 11:32 UTC on 18 November 2021, a user reported in the jenkinsci/jenkins Gitter channel that https://www.jenkins.io/doc/pipeline/steps/ was answering HTTP/503 errors with the message "Guru meditation" from Fastly's varnish.

   Service outageResources deleted

   Trigger

   The ingress-nginx Helm chart was upgraded from 4.0.6 to 4.0.8 at 10:42 UTC, and the new chart added an admission webhook rule that forbids Nginx configuration blocks in Ingress annotations.

   Root cause

   Breaking change in an upgrade

   Component

   Ingress controllerAdmission webhookHelmCDN and edge network

   Contributing factor

   Unverified assumptionCache-masked failureMonitoring blind spotHarmful manual action

   Detection

   A user reported in the jenkinsci/jenkins Gitter channel at 11:32 UTC that a jenkins.io page answered HTTP/503 errors, and status.jenkins.io reported the incident at 11:49 UTC.

   Remediation

   • Disabled the automated systems, rolled the ingress-nginx chart back to 4.0.6 and deleted the admission webhook by hand
   • Removed the forbidden annotations from the jenkins.io configuration
   • Upgraded the jenkins.io Helm chart to the last version known to work with ingress-nginx 4.0.8
   • Redeployed the jenkins.io Helm chart through the automated system and told Fastly to drop all cached pages

   Action items

   • Always read the changelog in depth when updating the ingress controllers, with two people pairing in real time
   • Add custom Datadog monitoring for www.origin.jenkins.io so that such an outage is detected
   • Make the monitor send the Host header www.jenkins.io so it is not redirected to Fastly
   • Check a set of pages, such as the pipeline steps page, not only the front page
   • Consider an ephemeral k3s end-to-end test before deploying to production

   Lessons

   Trusting a patch version of a Helm chart for the Ingress controller without reading its changelog in depth let a new admission rule remove the jenkins.io Ingress in production. Without monitoring on origin.jenkins.io, a user found the outage. A complete staging cluster with the same DNS setup would have caught the problem before production.

   View case

By root cause9