Incident Library
  • Root cause
  • Component
  • Symptom
  • Contributing factor
  • Case

Cases5 cases

1 to 5 of 5

  1. Symptoms

    From 20:31 UTC on July 9, 2026, DigitalOcean reported a problem with Kubernetes deployments in its NYC1 region. Application workloads could see intermittent DNS failures and NodeNotReady events.

    Root cause
    Component
    Contributing factor
    Lessons

    Cluster DNS is sensitive to latency, and CoreDNS on shared-CPU nodes can time out intermittently. DigitalOcean's advice is to place CoreDNS on dedicated-CPU node pools and to run enough CoreDNS replicas.

  2. Symptoms

    CI jobs failed now and then because a hostname could not be resolved. The failures came from tensorstore, appeared on several different instances and did not repeat consistently. The error read: "./tensorstore/util/result.h:420: Status not ok: status(): UNAVAILABLE: CURL error Could not resolve hostname: Could not resolve host: company-bucket.s3.amazonaws.com".

    Trigger

    An administrative pod running with host networking called sudo in a loop. Each sudo call looked up the node's own hostname, and with ndots:5 and four search domains every lookup became five queries, for both A and AAAA records.

    Root cause
    Component
    Contributing factor
    Detection

    Reports of flaky CI jobs that could not resolve an S3 bucket hostname, followed by i/o timeout errors in the CoreDNS logs.

    Remediation
    • added 'Defaults !fqdn' in /etc/sudoers.d/00-no-fqdn (mode 440) to the container image so sudo stopped looking up the hostname
    Lessons

    Traffic from CoreDNS to the VPC DNS resolver is limited to 1024 packets per second per interface, and drops show up only as UDP timeouts; the linklocal_allowance_exceeded counter in ethtool shows them. Names that are not fully qualified are multiplied by the search domains under ndots:5, and AAAA lookups double them again. sudo looks up the host's own name on every call unless 'Defaults !fqdn' is set.

  3. Symptoms

    During peak hours, when Mercari's GKE clusters handle very high request rates, the platform team saw kube-dns reaching its limits. DNS query rates were high enough to overwhelm the kube-dns service.

    Trigger

    Peak-hour traffic on the GKE clusters produced more DNS queries than the few kube-dns pods could answer.

    Root cause
    Component
    Contributing factor
    Detection

    During peak hours the team saw frequent NXDOMAIN and truncated-response errors and recurring "failed to refresh DNS cache" errors on the clusters, which showed that kube-dns had reached its limits.

    Remediation
    • deployed NodeLocal DNSCache on the Laboratory GKE cluster with a specific nodeAffinity to measure its effect
    • rolled NodeLocal DNSCache out gradually to the Dev and Prod environments by labelling node pools so its pods could be deployed there
    Lessons

    When every pod in a busy cluster resolves names through a few central kube-dns pods, DNS becomes a shared bottleneck, and a DNS failure quickly turns into higher latency, timeouts and cascading outages across microservices. A cache on each node takes most of that load off kube-dns and keeps resolution local to the node. Rolling the cache out first to an internal test cluster with nodeAffinity, and then node pool by node pool through labels, kept the blast radius of the change small.

  4. Symptoms

    At 23:48 CET on 24 January 2024 the Scaleway Kubernetes API for the FR-PAR region ran out of memory. At the same minute Scaleway saw requests to its API Gateway spike.

    Trigger

    Simultaneous deployments in the FR-PAR region pushed the Scaleway Kubernetes API out of memory.

    Root cause
    Component
    Contributing factor
    Detection

    Increased load on the API Gateway was detected at 23:48, the minute the incident began, and the incident was escalated to on-call engineers at 00:00:10.

    Remediation
    • raised the memory limit and garbage collection thresholds of the Kubernetes managed services
    • deployed additional replicas of key services
    • purged the registry cache and monitored the clusters as they stabilised
    • adjusted service configurations after the incident to keep the platform stable
    Action items
    • Implement a local authentication cache
    • Further develop node authentication
    • Enhance monitoring, adjust rate limiting strategies and improve incident response protocols
    Lessons

    Because the Kubernetes API also handled node authentication, its memory exhaustion made some nodes NotReady, and the endless retries of those nodes added load on the API Gateway. Scaleway plans a local authentication cache and further work on node authentication.

  5. Symptoms

    On May 10 the latency graphs of several services showed a few spikes of up to about one second, then latency climbed to five seconds and then to 20 seconds, and it stayed there for a long time. The same pattern appeared on many services, not just one.

    Trigger

    Several services sent a high volume of external DNS queries, all of which went through kube-dns.

    Root cause
    Component
    Contributing factor
    Detection

    Latency graphs of several services showed the rise; engineers then looked at load per kube-dns pod.

    Lessons

    By default a pod discovers DNS through the kube-dns cluster IP and uses the ClusterFirst policy, so even external lookups go through kube-dns. If a pod does not need cluster DNS, set its dnsPolicy to Default or None. Check the DNS policy early and often. iptables picks backends at random and is not a load balancer, so pods behind a cluster IP, kube-dns included, can carry very different loads.

Check your cluster for this

These 5 cases involve CoreDNS and Client-side DNS resolver and cache. kubegap audits a Kubernetes cluster for gaps like these, read-only, from Claude Code or Codex; its checks cite public reports like the ones in this library.

By root cause1