Cases35 cases

1 to 5 of 35

1. IL-0179 With DEBUG logging and synchronous log output, a high-traffic service filled the 64 KB stdout pipe, so request threads blocked in write() while holding database connections and HikariCP ran dry, failing requests in 30-second bursts

   MUSINSA2026

   Symptoms

   The on-call engineer for a high-traffic service was alerted that requests were failing in large batches every 30 seconds.

   High error rateIntermittent timeoutsConnection pool exhaustion

   Trigger

   DEBUG level logging was on in production when traffic surged, raising log volume to about 100 times normal while the service logged synchronously.

   Root cause

   Configuration change

   Component

   Application logging libraryContainer runtimeTelemetry agentApplication database

   Contributing factor

   Unverified assumptionExcessive blast radius

   Detection

   The on-call engineer was alerted that requests were failing in large batches every 30 seconds.

   Action items

   • Replace synchronous logging with TraceAwareAsyncAppender, which captures trace_id and span_id on the calling thread and drops logs instead of blocking when the queue is full (neverBlock=true)
   • Keep the amount of log output at a sustainable level, since an asynchronous queue still fills under sustained overload

   Lessons

   Removing AsyncAppender to keep trace IDs also removed the protection that kept request threads away from stdout back-pressure. A company-wide standard applies the same side effect to dozens of services, so check what a standard rests on and what working behaviour it takes away. ThreadLocal context does not cross into an asynchronous worker, but capturing it on the calling thread before handing the event off keeps both the IDs and the asynchronous output. Under extreme load, dropping log lines is preferable to stopping request handling.

   View case
2. IL-0200 Newly provisioned Kubernetes nodes ran an incompatible etcd version and broke cluster consensus in several GitHub production clusters, causing 5XX errors on Git operations and page loads

   GitHub2026

   Symptoms

   From 01:36 UTC on 12 March 2026, GitHub.com returned elevated error rates for Git operations, web requests and related services. At 01:54 UTC the GitHub status page said it was investigating reports of impacted performance for some services.

   High error rate

   Trigger

   During a planned infrastructure upgrade, a configuration issue made newly provisioned Kubernetes nodes run an incompatible version of etcd.

   Root cause

   Configuration change

   Component

   etcd

   Contributing factor

   Monitoring blind spot

   Detection

   The status page opened the incident at 01:54 UTC, 18 minutes after errors began, citing reports of impacted performance.

   Remediation

   • paused deployments for the duration of the incident
   • identified the newly provisioned nodes running the incompatible etcd version and removed them, which restored cluster consensus
   • ran a validation deploy that confirmed all systems were healthy before resuming normal operations

   Action items

   • Enforce version compatibility programmatically during node replacements
   • Add monitoring that detects split-brain conditions earlier
   • Update the recovery tooling to reduce restoration time

   View case
3. IL-0063 VPN outage after recreating a Redis StatefulSet restarted the whole Redis cluster without readiness checks

   AdGuard VPN2025

   Symptoms

   The day began with an alert that several instances of the Redis cluster were running out of disk space. That part was fixed quickly. The outage came an hour later: right after the Redis StatefulSet was deleted and recreated at 8:10 UTC, Kubernetes restarted every Redis pod within about five minutes, and problems started to appear.

   Service outageOOMKilledProbe failuresHigh latency

   Trigger

   To make Git match the volumes that had been resized by hand, the Redis StatefulSet was deleted with orphan (non-cascading) deletion and recreated with the new storage template; Kubernetes reconciled the new spec by restarting the entire Redis cluster.

   Root cause

   Configuration change

   Component

   Persistent volumes and stateful setsIn-memory cacheContainer memory limit

   Contributing factor

   No health probesUnverified assumptionSingle point of failureRetry stormNo headroom

   Detection

   An alert about Redis instances running out of disk space started the work; the outage itself showed up as backend errors about Redis connections right after the StatefulSet was recreated.

   Remediation

   • made the Redis masters forget obsolete node identities, reset the affected replicas and rejoined them, then waited for replication to catch up
   • identified the component that was actually running out of memory, scaled the backend service and raised memory limits for that component
   • temporarily relaxed probes so backend instances took traffic immediately instead of flapping between ready and not ready
   • reverted the temporary workarounds at 10:00 UTC

   Action items

   • Add startup probes so a Redis pod is not marked ready until its dataset is loaded
   • Build an own control plane for Redis that handles restarted pods stuck to an old master address
   • Reduce dependence on the single Redis cluster: move some important data to other stores, such as a separate Redis cluster per server, and use Kafka for some backend components

   Lessons

   The disk resize was not the problem; the cleanup afterwards was. An immutable field pushes operators toward deleting and recreating the controller, and that can set off a full reconcile. Startup and readiness probes are what slow a rolling restart down to a safe pace; without them a distributed store restarts in the most fragile way. Recovery plans must expect a cluster to heal slowly, and dependent services need to degrade gracefully while it does.

   View case
4. IL-0122 An invalid value in a configuration shared by several ChatGPT services put pods into crash loops and raised error rates

   OpenAI2025

   Symptoms

   From 7:43 PM to 8:38 PM PDT on July 15, 2025, a small percentage of ChatGPT users saw more errors in their conversations.

   Container crash loopHigh error rate

   Trigger

   An internal engineer applied a configuration change that contained an invalid value.

   Root cause

   Configuration change

   Component

   –

   Contributing factor

   Excessive blast radiusNo staged rollout

   Remediation

   • reverted the configuration to the correct value
   • started a rolling restart of the affected pods to force them to resynchronise

   Action items

   • Roll out future critical configuration changes for the service to a single cluster first, with automated health guards that stop the rollout if availability drops
   • Move to a service-specific configuration value instead of one shared between services
   • Improve deployment safeguards

   View case
5. IL-0192 A Crossplane composition merge-policy change for a TLS policy update switched Kubernetes Services from LoadBalancer to ClusterIP and deleted the load balancers behind about 25% of Grafana Cloud services

   Grafana Labs2025

   Symptoms

   At 08:41 UTC on 18 February 2025, several Grafana Labs application teams noticed that some of their endpoints were no longer available. The investigation quickly found that the load balancers for those endpoints were gone.

   Service outageResources deleted

   Trigger

   A change to the merge policy of a Crossplane composition, made so that the default TLS policy of the load balancers could be overridden, was applied to development, staging and production at the same time.

   Root cause

   Configuration change

   Component

   Configuration templatingCloud load balancer

   Contributing factor

   Unverified assumptionNo staged rolloutExcessive blast radiusNo safeguard on destructive change

   Detection

   Application teams noticed at 08:41 UTC that some of their endpoints were no longer available.

   Remediation

   • rolled back the Crossplane composition change
   • recreated the affected Kubernetes Services so that Kubernetes recreated their load balancers

   Action items

   • Add a CI check that blocks a deployment to more than one wave, so any exception to the dev, staging, canary, production order is caught
   • Give higher priority to a more sophisticated wave design that was already under discussion
   • Enable deletion protection on the load balancers, one layer below Crossplane
   • Enable deletion protection on other critical cloud provider resources
   • Develop the Crossplane Managed Resources exporter for change validation and visibility, now in beta testing within Platform engineering; simulated against the change that caused this outage, it shows a clear diff
   • Complete and test support for reconfiguring the TLS policy so application teams can deploy it

   Lessons

   A change that looked small and low-risk had a side effect that only a full end-to-end test through Crossplane and the cloud provider's load balancer controller would have shown; seeing the intended override work was not that test. Staged rollout and blast-radius limits that exist only as process can be skipped, so Grafana Labs moved to enforce waves in CI and to add deletion protection on the load balancers themselves, beneath the Crossplane layer.

   View case

By root cause1