Cases4 cases

1 to 4 of 4

1. IL-0150 A latent race condition in DynamoDB's DNS automation left an empty DNS record for dynamodb.us-east-1.amazonaws.com, and the DynamoDB and EC2 launch failures that followed caused EKS, ECS and Fargate container launch failures and cluster scaling delays in us-east-1

   Amazon Web Services2025

   Symptoms

   At 11:48 PM PDT on 19 October 2025, every system that reached DynamoDB in us-east-1 through the public regional endpoint started getting DNS failures and could not connect. This included customer traffic and internal AWS services that depend on DynamoDB. DynamoDB global table replicas in other regions still answered but fell behind in replication to and from us-east-1.

   DNS resolution failuresHigh error rateScale-up failureIntermittent connection failuresHigh latency

   Trigger

   One DNS Enactor, slowed by unusually high retry delays, applied a much older DNS plan to the regional DynamoDB endpoint just as another Enactor that had applied the newest plan ran its clean-up, which deleted that older plan and with it every IP address of the endpoint.

   Root cause

   Software defect

   Component

   Authoritative DNS servers and recordsApplication databaseCloud load balancer

   Contributing factor

   Automation amplificationRetry stormNo runbook

   Detection

   DNS failures to DynamoDB began immediately at 11:48 PM PDT and the engineering teams of affected AWS services were engaged at once; by 12:38 AM they had identified DynamoDB's DNS state as the source. The later NLB health check problem was detected by monitoring at 6:52 AM.

   Remediation

   • applied temporary mitigations by 1:15 AM that let some internal services reach DynamoDB and repaired key internal tooling
   • restored all DynamoDB DNS information by 2:25 AM through manual operator intervention
   • throttled incoming work and selectively restarted DWFM hosts from 4:14 AM so droplet leases could be re-established
   • reduced the load on Network Manager to bring network configuration propagation times back to normal by 10:36 AM
   • disabled automatic health check failover for NLB at 9:36 AM, and re-enabled it at 2:09 PM after EC2 recovered
   • relaxed the EC2 request throttles from 11:23 AM until all EC2 APIs and launches were normal at 1:50 PM

   Action items

   • Disable the DynamoDB DNS Planner and DNS Enactor automation worldwide
   • Fix the race condition and add protections against applying incorrect DNS plans before re-enabling the DNS automation
   • Add a velocity control to NLB that limits how much capacity a single load balancer can remove when health check failures cause availability zone failover
   • Build an additional EC2 test suite that exercises the DWFM recovery workflow at scale
   • Improve throttling in EC2 data propagation systems so incoming work is rate limited by the size of the waiting queue

   Lessons

   A single DNS record that automation can empty is enough to take a widely used regional endpoint off the network, and every service built on it fails in turn. A check made once at the start of a long operation can be stale by the time the operation writes its result. Recovery of the dependency is not recovery of the dependents: systems that lost state during the outage, such as EC2's droplet leases and network propagation backlog, can collapse under their own catch-up work, and container services that rely on new instance launches keep failing to launch and scale until that work is done.

   View case
2. IL-0104 After a CoreDNS pod was OOMKilled, the talk names three causes: Istio's aggressive DNS cache refresh on one reused client port, kube-proxy not cleaning up conntrack entries of terminated pods, and the 2-minute UDP conntrack timeout

   Cisco ThousandEyes2025

   Symptoms

   On 4 September 2025 a CoreDNS pod in a Cisco ThousandEyes Kubernetes cluster was OOMKilled.

   DNS resolution failuresStale endpoint routingOOMKilled

   Trigger

   A CoreDNS pod was OOMKilled.

   Root cause

   Software defect

   Component

   CoreDNSkube-proxyconntrack tableIstio

   Contributing factor

   Unreviewed defaults

   Lessons

   The closing slide sets three behaviours side by side: Istio's extremely aggressive DNS cache refresh with one client port reused for all DNS requests, kube-proxy's lack of a cleanup mechanism for stale conntrack entries of terminated pods (fixed in Kubernetes v1.32), and conntrack's default bidirectional UDP stream timeout of 2 minutes. The speaker describes Istio as making some very complex things simple but some very simple things complex, and presents Cilium, which looks up Services in maps instead of walking the KUBE-SERVICES chain and can replace kube-proxy entirely with its eBPF data path.

   View case
3. IL-0050 Pods on Kubernetes failed to resolve an external Redis hostname because of ndots:5, the musl resolver in Alpine images, and Netty's DNS resolver

   Toyota Connected2018

   Symptoms

   Services that used the team's Redis-dependent library crashed on start-up, and their teams reported it to the ops members. The Spring Boot logs showed the applications failing to resolve the Redis hostname during bean initialisation.

   DNS resolution failuresIntermittent connection failures

   Root cause

   Software defect

   Component

   Client-side DNS resolver and cache

   Contributing factor

   Unreviewed defaultsUnverified assumption

   Detection

   Service teams reported start-up crashes to the ops members of the team; later the resolution failures were seen in Kibana.

   Remediation

   • set ndots to 4 with a dnsConfig block in the Kubernetes deployment manifests
   • corrected the maximum connection pool size in the Redis library, cutting Redis connections by about 70%

   Action items

   • Test Debian glibc-based base images added to the image library to see whether they resolve the DNS problems
   • Update dependencies to newer Netty versions

   Lessons

   With ndots:5, a name outside the cluster that has fewer than five dots is first tried with every cluster search domain. Adding a trailing dot avoids that, but only if every library in the path accepts it, and the Netty version in use did not. The ndots change is a workaround that will not hold forever. The author would like better alerting for this kind of failure but notes that alerts on one-off DNS failures are not wanted.

   View case
4. IL-0074 All AirMap platform services down as worker nodes went NotReady and pods crash-looped on network and DNS failures

   AirMap2018

   Symptoms

   At about 15:00 UTC on 19 July 2018, monitoring alerted on rising 5xx responses from several APIs, most notably pilot and tiles. Logins failed first, because the pilot service fetches the user's profile, and from there all services became unresponsive. Every affected API ran on the production Kubernetes cluster.

   High error rateNode NotReadyDNS resolution failuresContainer crash loopService outage

   Root cause

   Software defect

   Component

   kubelet

   Contributing factor

   Unpatched known bug

   Detection

   Monitoring alerted on an increase in 5xx responses from several APIs, most notably pilot and tiles.

   Remediation

   • restarted the kubelets on the stuck worker nodes, which did not last
   • restarted all worker nodes in a staggered order starting at about 18:00 UTC, which took about 1.5 hours

   Action items

   • Restart nodes on a rolling schedule to keep nodes and kubelets healthy until the fixes land upstream and reach the cloud provider, Microsoft Azure

   Lessons

   When nodes keep falling back to NotReady after kubelet restarts and pods fail on network and DNS errors, a known upstream bug may be the cause; matching the symptoms to the upstream issue tracker, with help from the community, found the cause and the fix candidates.

   View case

By root cause1