Cases6 cases

5 to 6 of 6

1. IL-0185 A disk failure made the first control plane node of a Kubespray cluster read-only, and recovery needed the Kubespray inventory reordered and a new control plane node joined

   Hans H. Kim2023

   Symptoms

   The kernel on a master node of the Kubernetes cluster logged disk I/O errors: "[HAWKEYE] kernel:: [22329228.540857] blk_update_request: I/O error, dev sda, sector 795030104 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0". The sda disk switched to read-only, and the machine needed a new disk and an operating system reinstall.

   Node NotReady

   Trigger

   A hardware failure of the disk on the first control plane node.

   Root cause

   Hardware failure

   Component

   KubesprayetcdNode root diskConfigMaps and Secrets

   Contributing factor

   Single point of failure

   Detection

   Disk I/O errors from blk_update_request on dev sda appeared in the node's kernel log.

   Remediation

   • reordered the kube_control_plane group in the Kubespray inventory so that node-2 became the first control plane node
   • removed the failed machine from the cluster
   • edited the cluster-info ConfigMap in kube-public to point at a live control plane node and updated certificate-authority-data
   • installed and configured kubelet and the other components on a new node and joined it as a control plane node with kubeadm, skipping the etcd join phase
   • added the etcd member separately

   Lessons

   In a Kubespray cluster the first node of the kube_control_plane inventory group is special, so its failure needs its own procedure: move another node into the first position, fix the cluster-info ConfigMap, join a new control plane node and add the etcd member back. etcd should be brought back to full membership before another control plane node fails.

   View case
2. IL-0066 Broken ConfigMap change lay dormant for weeks, then took down Pusher's edge proxy when a cluster upgrade replaced its pods

   Pusher2019

   Symptoms

   During a cluster upgrade, all traffic to Pusher's products stopped. The speaker recalls that requests were failing with 500 errors.

   Service outageHigh error rate

   Trigger

   A cluster upgrade replaced nodes, so the bridge pods restarted and loaded a ConfigMap that had been changed three or four weeks earlier.

   Root cause

   Configuration change

   Component

   ConfigMaps and Secrets

   Contributing factor

   Change with a delayed effectUnverified assumption

   Action items

   • Build and run Wave so that changes to ConfigMaps and Secrets roll out new pods immediately

   Lessons

   A ConfigMap change does not restart the pods that use it, so for an application that cannot reload its configuration the change takes effect only when pods are next replaced, possibly weeks later during unrelated work. Tie configuration to the pod template so a bad change fails at the moment it is made.

   View case

By root cause4