Cases17 cases

5 to 9 of 17

1. IL-0153 DOKS worker nodes went NotReady at 06:00 UTC on three days because a systemd timer in the Debian image ran apt upgrade and killed it mid kernel upgrade, breaking node networking

   DigitalOcean2023

   Symptoms

   Customers of DigitalOcean Managed Kubernetes (DOKS) saw worker nodes go NotReady between 06:00 and 07:00 UTC and stay unavailable, taking down the services on them, until the nodes were replaced or rebooted; some nodes needed several replacements or reboots. The first sporadic reports on October 8 said replacing the node fixed it. The same thing happened again around 06:00 UTC on October 9, more widely and across many regions, and again on October 10. Only clusters on versions 1.27.6-do.0 and 1.28.2-do.0 were affected.

   Node NotReadyService outage

   Trigger

   A systemd timer in the DigitalOcean Debian image started apt upgrade daily at 06:00 UTC, with a random delay of up to 60 minutes.

   Root cause

   Configuration change

   Component

   Node operating system imageLinux kernelkubelet

   Contributing factor

   Unreviewed defaultsLimited debug accessChange with a delayed effect

   Detection

   Sporadic customer reports of failed worker nodes arrived at 07:43 UTC on October 8; internal incident response started at 07:10 UTC on October 9 after broader impact across regions.

   Remediation

   • Advised customers to replace or reboot affected worker nodes
   • Arranged SSH and console access to worker nodes while they were healthy, and live-debugged an affected node on October 10
   • Released a DaemonSet to all affected clusters that disables the apt upgrade systemd timer on every worker node
   • Released new node images without the auto-update process

   Action items

   • Disable the timer during node provisioning, then remove the DaemonSet from all clusters
   • Add a check to the internal conformance test suite for new cluster versions that the auto-upgrade process and other unwanted timers stay disabled
   • Support logging into worker nodes even when normal access paths are broken

   Lessons

   An operating system auto-update timer left enabled in a node image can change the kernel and systemd underneath Kubernetes, and a timeout that kills the upgrade half-way can leave a node without networking. Failures that start at the same time every day point to a scheduled job on the nodes, and systemd timers belong on that list next to cron jobs. When the failure takes out a node's network, an investigation that depends on logging into the node stalls; access paths that work while the node is broken shorten diagnosis.

   View case
2. IL-0091 Changing the worker node instance type through Terraform recycled all nodes at once and deleted users' production pods together

   UK Ministry of Justice2023

   Symptoms

   At 10:23 on 6 June 2023 a user of the Cloud Platform reported that all of their production pods had been deleted at the same moment. Several users received Pingdom alerts that their applications were down for a few minutes.

   Service outage

   Trigger

   The team changed the instance type of the cluster's worker nodes through Terraform.

   Root cause

   Configuration change

   Component

   Node poolTerraform

   Contributing factor

   Excessive blast radiusNo runbook

   Detection

   Users reported that their production pods had been deleted at once and that Pingdom alerts showed their applications down; the incident was declared at 11:00.

   Action items

   • Ask AWS, through a support ticket, for the steps to change the node instance type without an outage
   • Plan how to make instance type changes through Terraform without downtime and add a runbook with the steps for changing the node instance type

   View case
3. IL-0109 A retried node rollover on a DFDS EKS cluster set the Auto Scaling group back to 15 instances, and the default termination policy removed every healthy worker node, leaving the cluster with no nodes

   DFDS2023sev1

   Symptoms

   At 09:33 UTC on 14 February 2023 end users told the platform team that Kubernetes logs were not arriving in CloudWatch as expected. The investigation went through fluentd and found that the nodes were running containerd as their container runtime instead of docker-shim. A scheduled node rollover the day before, at 07:30 UTC on 13 February, had set containerd as the default runtime by accident.

   Service outageResources deletedMonitoring outage

   Trigger

   A scheduled node rollover had accidentally made containerd the default container runtime, which stopped log shipping to CloudWatch; the unscheduled rollover to revert it timed out, and the pipeline run that followed reduced the Auto Scaling group from 30 to 15 instances.

   Root cause

   Configuration change

   Component

   Container runtimeNode launch templateNode poolTerraformTelemetry agent

   Contributing factor

   Automation amplificationUnreviewed defaultsUnrepresentative stagingNo configuration testsNo runbookHarmful manual action

   Detection

   End users reported the missing CloudWatch logs that started the work. The postmortem lists 2 minutes as the time to detection of the node failure.

   Remediation

   • ran the node rollover script to add new nodes, which failed on a timeout from Docker Hub
   • ran the node rollover script a second time, which added new nodes that the load balancer marked healthy at 11:01 UTC

   Action items

   • Document the rollover process, especially what can be done when it goes wrong
   • Investigate options for improving the rollover process
   • Add fluentd log collection to the QA test suite so logs are covered end to end
   • Add alarms for fluentd when too little or no log data is sent
   • Implement a staging environment
   • Implement guards against selecting an invalid container runtime

   Lessons

   When a change goes wrong, rolling back to a known working configuration is safer than rushing a fix, which can make the damage worse. Launching new worker nodes depends on the cloud-init script not failing in any way. The QA configuration differed from production, there was no staging environment, the QA tests did not cover fluentd log collection, and the rollover process had no documentation for when it fails.

   View case
4. IL-0116 A CNI configuration change incompatible with a hardware variant that exists only in production cut network connectivity in an OpenAI GPU cluster and took text-davinci-003 fully down

   OpenAI2023

   Symptoms

   At 4:53 pm Pacific on 25 January 2023 one of OpenAI's GPU clusters had a major outage, and the text-davinci-003 model went fully down.

   Service outageThroughput degradation

   Trigger

   A configuration change to the CNI (Container Network Interface) plugins, which provide network connectivity to containers, was deployed to a GPU cluster that contained a hardware variant the staging environment did not have.

   Root cause

   Configuration change

   Component

   CNI plugin

   Contributing factor

   Unrepresentative stagingMonitoring blind spot

   Detection

   Engineers immediately identified the problem as network connectivity, but it took nearly an hour to identify CNI as the cause.

   Remediation

   • put a fix for the CNI configuration change in place, which restored 80% of traffic immediately
   • deployed models back onto GPUs over about three more hours until capacity was fully stable

   Action items

   • Make staging environments contain every type of hardware configuration so they better represent production
   • Monitor and alert on the health of the CNI system directly
   • Fix the network and storage bottlenecks that limit how quickly many replicas of a model can be deployed

   Lessons

   A change that had been deployed to other clusters over 24 hours and deemed safe still broke a cluster with different hardware, so staging needs every hardware configuration that production has.

   View case
5. IL-0191 A label selector accidentally added to the Loki distributor Service matched only the new pods of a rollout, which took all write traffic, were OOM-killed and stalled the rollout

   Grafana Labs2022

   Symptoms

   During a rollout of the Grafana Loki distributor Deployment in one Grafana Cloud Logs environment, the write path went down for about 25 minutes. The newly started distributor pods were OOM-killed over and over, never passed their health and readiness checks, and the rollout stopped making progress.

   Service outageOOMKilledLoad imbalanceProbe failures

   Trigger

   Step 1 of moving the Loki ring off a separately deployed key-value store onto embedded memberlist added a new label, gossip_ring_member: 'true', to the distributor pods and Service, together with a small config change, and the change required a rollout of the distributors.

   Root cause

   Configuration change

   Component

   Configuration templatingService discoveryContainer memory limit

   Contributing factor

   Unreviewed defaultsIgnored early signalUnrepresentative staging

   Detection

   The first clue was kubectl get pods and the kube_deployment_status_replicas_updated metric showing that only 16 of 140 distributor pods had been updated.

   Remediation

   • scaled the distributor Deployment out horizontally so the load spread over more pods with the new label and the rollout could continue
   • reverted the migration step to end the outage
   • set service_ignored_labels:: [$._config.gossip_member_label] and passed it to k.util.serviceFor so the label is no longer copied into the Service selector

   Action items

   • Update the function that generates a Service from a Deployment or StatefulSet to handle edge cases, including this one

   Lessons

   A Service whose selector is built by copying every label of a workload changes which pods it matches as soon as a new label is added. During a rollout it then matches only the new pods, which receive all the traffic before there are enough of them. A few errors during a rollout in other environments hid the problem, because those environments gave distributors more memory and could absorb the shift. Manifest diffs kept for every pull request made it possible to see that the Service selector had changed.

   View case

By root cause1