Cases6 cases

5 to 6 of 6

1. IL-0017 AWS VPC CNI stopped allocating pod IP addresses on six nodes of the live cluster, leaving new pods in ContainerCreating

   UK Ministry of Justice2023

   Symptoms

   At 08:15 a user posted in the #ask-cloud-platform channel that new deployments were not starting: their pods stayed in ContainerCreating.

   Pods stuck in ContainerCreatingIP address exhaustion

   Root cause

   Configuration change

   Component

   AWS VPC CNINode pool

   Contributing factor

   No configuration tests

   Detection

   A user reported new deployments stuck in ContainerCreating in the #ask-cloud-platform channel at 08:15; the incident was declared at 09:31.

   Remediation

   • Added new nodes and cordoned and drained the six affected nodes
   • Enabled prefix delegation in the VPC CNI on the live cluster after comparing its CNI settings with a 1.23 test cluster

   Action items

   • Add a test or check that confirms IP address allocation is working as expected (#4669)

   Lessons

   The write-up states no lessons beyond its review action, which is to add a check that IP address allocation works.

   View case
2. IL-0015 A GKE cluster's /16 pod address range ran out at 256 nodes, leaving new pods Pending and node scale-ups failing

   loveholidays2020

   Symptoms

   A colleague wrote in Slack that his application was taking a long time to deploy. A deployment that normally finishes in minutes had been running for about an hour: about half of the new pods were running and serving traffic, and the other half were Pending.

   Pods PendingIP address exhaustionScale-up failure

   Trigger

   The cluster reaching 256 nodes, the most its /16 pod secondary range could hold at 256 addresses per node; every further node creation failed.

   Root cause

   Capacity exhaustion

   Component

   VPC subnet or pod address rangeCluster autoscalerNode pool

   Contributing factor

   Unreviewed defaultsUnknown limit

   Detection

   A colleague reported in Slack that a deployment was slow; the pending pods' events and the cluster autoscaler status ConfigMap showed the exhausted IP space.

   Remediation

   • lowered the maximum pods per node on selected node pools, cutting IP consumption by about 30%
   • moved some node pools to larger instance types

   Action items

   • Lower the maximum pods per node on node pools that do not run many pods
   • Use larger instance types in some node pools

   Lessons

   In a VPC-native GKE cluster the number of nodes, not the number of pods, uses up the pod range: by default each node reserves 256 addresses, so even a /16 is full at 256 nodes. Maximum pods per node and node size are the practical levers; larger nodes pack better but take more pods down when they fail.

   View case

By root cause2