Cases19 cases

6 to 10 of 19

1. IL-0231 Deleting EKS managed node groups also deleted Karpenter's instance profile, and every Stytch worker node shut down

   Stytch2023

   Symptoms

   On 23 February 2023 Stytch's EKS worker nodes went Ready:Unknown one after another, Karpenter failed to launch replacement nodes, and with fewer and fewer pods scheduled the Live Stytch API went down for 14 minutes, returning 5XX on every call.

   Node NotReadyScale-up failurePod evictionPods PendingService outage

   Trigger

   At 14:21 UTC Stytch landed a change to remove unused EKS managed node groups, because it had decided to run its data plane applications fully on nodes provisioned by Karpenter. Because Crossplane resources use an orphan deletion policy, engineers deleted the node groups in the AWS console, first in staging and then in production.

   Root cause

   Configuration change

   Component

   KarpenterNode poolConfiguration templating

   Contributing factor

   Unverified assumptionShared credentialChange with a delayed effectIgnored early signal

   Detection

   Low-urgency alerts that Karpenter could not find the instance profile fired in staging at 16:06 UTC and in production at 17:48 UTC but were not treated as an incident. The incident process started at 20:26 UTC when node launch failures spiked the Karpenter error rate, and Kubernetes monitoring alerts in production followed at 20:44 UTC. The support team flagged the outage at 21:14 UTC.

   Remediation

   • Reverted the node group deletion, which recreated the managed node groups
   • Manually scaled up one of the Live API node groups with more and much larger nodes and removed its taints
   • Removed node selectors from the applications one after another so their pods could be scheduled

   Action items

   • Treat Karpenter errors as high-urgency alerts that page the on-call engineer
   • Tune cluster alerting thresholds to send a high-urgency page earlier
   • Add alerts for nodes that stay NotReady or Unknown for long periods
   • Raise the thresholds of other deployment alerts, such as unschedulable pods and replicas not available
   • Give Karpenter its own IAM instance profile, separate from the one used by the node groups
   • Separate other AWS resources that were shared between uses, specifically IAM and security groups
   • Rework the EKS and Karpenter configuration so system instance profiles are unique, static per cluster and generated by Karpenter
   • Introduce a cloud visualization tool for engineers making infrastructure changes
   • Add live system and product metrics to the status page
   • Ask AWS to confirm the undocumented actions and side effects of deleting a node group
   • Correct the shared use of IAM roles and security groups across the infrastructure

   Lessons

   The IAM role for Karpenter's self-managed nodes should never have been the same as the one for the managed node groups; sharing it is what let the node group deletion break Karpenter, and the roles had been left combined for speed and simplicity when Karpenter was first set up. The hours-long delay between the configuration change and its effect made the incident hard to assess, and AWS confirmed that this delay is expected, so Stytch will allow for it in future IAM instance profile changes.

   View case
2. IL-0070 Critical pods on core nodes evicted when Prometheus began scraping about 200 nodes after a dask-gateway scale-up

   2i2c2023

   Symptoms

   The hub pod of the prod JupyterHub on the leap cluster (leap.2i2c.org) restarted unexpectedly during a large node scale-up, and a user opened a support ticket. The ingress-nginx and proxy pods kept running.

   Pod evictionPods Pending

   Trigger

   A user's dask-gateway workload added about 100 dask-worker nodes within a minute, and Prometheus started scraping the metrics exporters on about 200 nodes.

   Root cause

   Capacity exhaustion

   Component

   PrometheusNode pool

   Contributing factor

   No headroomExcessive blast radiusMonitoring blind spot

   Detection

   A user support ticket (2i2c Freshdesk ticket 414) about the leap hub; the engineer then looked at Grafana and the cluster's nodes and events.

   Action items

   • Configure CPU and memory requests for the hub and proxy pods (#2127; at least 100m CPU was proposed)
   • Make the Grafana OOMKiller dashboard work (#2213)
   • Move LEAP cloud infrastructure to shared nodes (#2209)
   • Update resource requests and limits, mainly for ingress-nginx and Prometheus (#2324)
   • Decide whether Prometheus should scrape dask worker pods (#2366)

   Lessons

   Prometheus load grows with the number of nodes, so a burst of autoscaled nodes can push a nearly full core node over the edge and evict the pods that matter most. Core pods that request 10m of CPU get a tenth of the CPU share of busy neighbours that request 100m. Kubernetes events expire after an hour, so evidence of OOM kills needs a dashboard that keeps it.

   View case
3. IL-0096 A GKE node pool pinned to the europe-west2-b zone could not scale for 6.5 hours because Google ran out of resources in that zone (ZONE_RESOURCE_POOL_EXHAUSTED)

   2i2c2022

   Symptoms

   A user of the LIS JupyterHub reported a "backoff after failed scale-up" error, and user servers would not start. An engineer opened incident #36, "LIS hub cannot scale", at 5:40 AM Pacific on 14 November 2022.

   Scale-up failurePods PendingService outage

   Trigger

   At 10 AM UK time on 14 November 2022, the B zone of Google Cloud's europe-west2 region (London) ran out of resources to allocate. The LIS cluster's nodes were restricted to that zone.

   Root cause

   Cloud provider outage

   Component

   Node poolCluster autoscaler

   Contributing factor

   Single point of failurePages not delivered

   Detection

   A user reported the "backoff after failed scale-up" error; an engineer opened the incident at 5:40 AM Pacific, about three hours and forty minutes after the zone ran out of resources.

   Remediation

   • edited the node pool in the GCP console to allow node creation in the A and C zones of europe-west2, which were not exhausted

   Action items

   • Either restrict the node pool back to the B zone after the Black Friday event, or move the cluster and the NFS Filestore to the A zone (infrastructure issue #1944)
   • Investigate an enterprise plan that allows a regional NFS, at higher cost (infrastructure issue #1945)
   • Make sure PagerDuty notifications always get through to engineers (team-compass issue #574)

   Lessons

   A node pool pinned to one zone for storage performance cannot scale when the cloud provider runs out of capacity in that zone. The autoscaler's "backoff after failed scale-up" message usually points to quotas, and raising quotas does nothing here; the ZONE_RESOURCE_POOL_EXHAUSTED error in the logs is what identifies a zone without capacity. The review found that one engineer wearing many hats (incident commander, comms and debugging), with pages not reaching the other responders, made the response harder; a team response would have given more support.

   View case
4. IL-0139 Pods on GKE clusters with Calico network policy got stuck Terminating or Pending after upgrading to 1.22 or later because of a race condition in the Calico component

   Google Cloud2022

   Symptoms

   After upgrading to GKE 1.22 or later, clusters that use Calico network policy could have pods stuck in Terminating or Pending. Google Cloud posted the incident at 16:01 US/Pacific on 2022-09-15 as pods stuck terminating; from the 2022-09-21 update the description also named pods stuck Pending.

   Pods stuck in TerminatingPods Pending

   Trigger

   Upgrading a GKE cluster that uses Calico network policy to version 1.22 or later.

   Root cause

   Software defect

   Component

   CalicokubeletPod termination

   Contributing factor

   –

   Remediation

   • released a fix in GKE 1.24.4-gke.800 and made it available in 1.23 and 1.22
   • offered an internal patch through Google Cloud Support for affected customers
   • advised customers to restart the kubelet and calico-node to get stuck pods unstuck
   • advised customers without a strong need for Calico to disable Calico network policy

   Action items

   • Upgrade clusters on the Rapid, Regular and Stable release channels running 1.22 or 1.23 to the fixed version automatically

   Lessons

   A race in the Calico component can leave pods stuck Terminating, with FailedKillPod and KillPodSandbox errors that point at the network plugin, not at the workload. Restarting the kubelet and calico-node frees the stuck pods but does not remove the race; the fixed GKE version or Google's internal patch does. Clusters that use the cluster autoscaler are more likely to hit it.

   View case
5. IL-0205 The GKE cluster autoscaler could not add nodes to GitLab.com's production cluster because Google Cloud ran out of SSD persistent disks in us-east1

   GitLab2021

   Symptoms

   At 08:05 UTC on 2021-06-21 the API service's Apdex (the share of requests that finish within a target time) and Rails request queuing began trending the wrong way. At 09:01 the team found the API deployment unhealthy: it needed more pods for the day's growing traffic, but no new nodes could be added to give it pod capacity. Users saw slow responses; the review found no sign that error rates rose.

   Scale-up failureHigh latencyPods PendingDeploys failing

   Trigger

   Google Cloud ran out of SSD persistent disk stock in us-east1, the region GitLab.com runs in, while the API service needed more nodes for rising user traffic.

   Root cause

   Cloud provider outage

   Component

   Cluster autoscalerNode pool

   Contributing factor

   Monitoring blind spotLimited debug accessOverlapping failures

   Detection

   There was no alert on resource availability. Apdex and Rails queuing began trending the wrong way at 08:05 UTC and an engineer declared the incident in Slack at 08:43; finding the cause took a lot of log digging: cluster autoscaler errors about node pools in backoff, then ZONE_RESOURCE_POOL_EXHAUSTED at the instance-group level, and finally Google Cloud support naming SSD as the exhausted resource.

   Remediation

   • added a node pool that uses pd-standard disks
   • scaled the new node pool by hand across all three zones to relieve the API
   • brought more pd-standard node pools online for the other blocked workloads
   • stopped production deployments and opened a Google Cloud support case about the cluster autoscaler not working with the new node pools
   • changed node pools and nodeSelectors so the remaining workloads ran on pd-standard nodes
   • removed the SSD-backed node pools after a day without problems

   Action items

   • Move Kubernetes services to pd-standard disks (delivery#1837)
   • Capture resource exhaustion errors as a metric

   Lessons

   A cloud region can run out of one specific resource, here SSD persistent disks, and the only error may be a generic ZONE_RESOURCE_POOL_EXHAUSTED that does not name it. GitLab could neither monitor nor reserve resource availability, so detection took 22 hours and the cause came from Google Cloud support. The workloads ran fine on pd-standard disks. A second problem found on the way, a cluster autoscaler that does not fall back to another matching node pool when one cannot scale, slowed the move to the new node pools.

   View case

By root cause6