Cases23 cases

8 to 12 of 23

1. IL-0153 DOKS worker nodes went NotReady at 06:00 UTC on three days because a systemd timer in the Debian image ran apt upgrade and killed it mid kernel upgrade, breaking node networking

   DigitalOcean2023

   Symptoms

   Customers of DigitalOcean Managed Kubernetes (DOKS) saw worker nodes go NotReady between 06:00 and 07:00 UTC and stay unavailable, taking down the services on them, until the nodes were replaced or rebooted; some nodes needed several replacements or reboots. The first sporadic reports on October 8 said replacing the node fixed it. The same thing happened again around 06:00 UTC on October 9, more widely and across many regions, and again on October 10. Only clusters on versions 1.27.6-do.0 and 1.28.2-do.0 were affected.

   Node NotReadyService outage

   Trigger

   A systemd timer in the DigitalOcean Debian image started apt upgrade daily at 06:00 UTC, with a random delay of up to 60 minutes.

   Root cause

   Configuration change

   Component

   Node operating system imageLinux kernelkubelet

   Contributing factor

   Unreviewed defaultsLimited debug accessChange with a delayed effect

   Detection

   Sporadic customer reports of failed worker nodes arrived at 07:43 UTC on October 8; internal incident response started at 07:10 UTC on October 9 after broader impact across regions.

   Remediation

   • Advised customers to replace or reboot affected worker nodes
   • Arranged SSH and console access to worker nodes while they were healthy, and live-debugged an affected node on October 10
   • Released a DaemonSet to all affected clusters that disables the apt upgrade systemd timer on every worker node
   • Released new node images without the auto-update process

   Action items

   • Disable the timer during node provisioning, then remove the DaemonSet from all clusters
   • Add a check to the internal conformance test suite for new cluster versions that the auto-upgrade process and other unwanted timers stay disabled
   • Support logging into worker nodes even when normal access paths are broken

   Lessons

   An operating system auto-update timer left enabled in a node image can change the kernel and systemd underneath Kubernetes, and a timeout that kills the upgrade half-way can leave a node without networking. Failures that start at the same time every day point to a scheduled job on the nodes, and systemd timers belong on that list next to cron jobs. When the failure takes out a node's network, an investigation that depends on logging into the node stalls; access paths that work while the node is broken shorten diagnosis.

   View case
2. IL-0016 Prometheus on the live cluster ran out of memory and was OOMKilled, and the monitoring node it ran on went NotReady

   UK Ministry of Justice2023

   Symptoms

   At 14:05 on 25 July 2023, a high-priority PagerDuty alert from Pingdom reported that the "Prometheus - live healthcheck" was DOWN. Prometheus on the live cluster was unavailable, and the Cloud Platform lost its monitoring for a while.

   Monitoring outageOOMKilledNode NotReady

   Trigger

   The growing number of namespaces and Prometheus rules raised Prometheus' memory needs beyond what its node instance size could hold.

   Root cause

   Capacity exhaustion

   Component

   PrometheusNode poolContainer memory limit

   Contributing factor

   No alert on limit

   Detection

   A Pingdom health check on Prometheus failed and raised a high-priority PagerDuty alert.

   Remediation

   • drained the monitoring node, moving Prometheus to another monitoring node
   • changed the node instance size to r6i.4xlarge
   • raised the Prometheus memory limit to 100Gi
   • set the Prometheus container limits to 12 CPU cores and 110Gi of memory

   Action items

   • Add an alert on node memory usage and on a pod using up most of a node's memory (issue #4538)

   View case
3. IL-0185 A disk failure made the first control plane node of a Kubespray cluster read-only, and recovery needed the Kubespray inventory reordered and a new control plane node joined

   Hans H. Kim2023

   Symptoms

   The kernel on a master node of the Kubernetes cluster logged disk I/O errors: "[HAWKEYE] kernel:: [22329228.540857] blk_update_request: I/O error, dev sda, sector 795030104 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0". The sda disk switched to read-only, and the machine needed a new disk and an operating system reinstall.

   Node NotReady

   Trigger

   A hardware failure of the disk on the first control plane node.

   Root cause

   Hardware failure

   Component

   KubesprayetcdNode root diskConfigMaps and Secrets

   Contributing factor

   Single point of failure

   Detection

   Disk I/O errors from blk_update_request on dev sda appeared in the node's kernel log.

   Remediation

   • reordered the kube_control_plane group in the Kubespray inventory so that node-2 became the first control plane node
   • removed the failed machine from the cluster
   • edited the cluster-info ConfigMap in kube-public to point at a live control plane node and updated certificate-authority-data
   • installed and configured kubelet and the other components on a new node and joined it as a control plane node with kubeadm, skipping the etcd join phase
   • added the etcd member separately

   Lessons

   In a Kubespray cluster the first node of the kube_control_plane inventory group is special, so its failure needs its own procedure: move another node into the first position, fix the cluster-info ConfigMap, join a new control plane node and add the etcd member back. etcd should be brought back to full membership before another control plane node fails.

   View case
4. IL-0198 An automatic Ubuntu security update restarted systemd-networkd, which flushed the IP rules Cilium relied on and cut more than 60 percent of Datadog's Kubernetes nodes off the network across regions and cloud providers

   Datadog2023

   Symptoms

   Between 06:00 and 07:00 UTC on 8 March 2023, Kubernetes nodes in several Datadog regions lost network connectivity at the same time, on AWS, Google Cloud and Azure. All services across multiple regions were affected, including the regions that host Datadog's CI/CD and automation tools. Datadog's regions are not connected to each other and changes are rolled out one region at a time, so a simultaneous failure on several cloud providers looked implausible at first.

   Node NotReadyService outageThroughput degradation

   Trigger

   On 7 March 2023 Ubuntu published a systemd patch for a CVE (249.11-0ubuntu3.7). Ubuntu's default unattended upgrades installed it on the nodes between 06:00 and 07:00 UTC on 8 March, and installing it restarted systemd-networkd.

   Root cause

   Breaking change in an upgrade

   Component

   systemd-networkdCiliumNode operating system image

   Contributing factor

   Unreviewed defaultsChange with a delayed effectNo staged rolloutAutomation amplification

   Remediation

   • restarted thousands of disconnected instances on Google Cloud and Azure through the cloud APIs, keeping their local disks
   • rebuilt the data lost with terminated AWS instances' local disks through replication, reprocessing and restores from backup

   Lessons

   A change in a base operating system component can stay dormant for months until something restarts that component. Here the trigger was a security patch, and the change reached every region at once because automatic OS updates ran outside the progressive, region-by-region process used for every other change. Cloud providers react differently to an instance that loses its network. Google Cloud and Azure left the instances running, so a restart recovered them with their disks; AWS replaced them quickly, which brought stateless services back fast but destroyed the local-disk data the stateful services needed.

   View case
5. IL-0112 The daily node rollover put DFDS's EKS nodes on an AMI later recalled for a kernel issue, causing "PLEG is not healthy" NodeNotReady flaps and pod network timeouts

   DFDS2022

   Symptoms

   On 2022-10-31 a planned upgrade of the vpc-cni EKS add-on, started from the deployment pipeline at 13:45 UTC, timed out at 14:10. Only about 10 of the 45 aws-node pods had upgraded, 5 were stuck in Terminating and the other 30 had not been attempted.

   Node NotReadyUpgrade stallIntermittent timeoutsIntermittent connection failures

   Trigger

   At 07:30 UTC on 2022-10-31 the daily node rollover replaced the existing nodes with nodes built from AMI v20221027, the latest AWS EKS node AMI, released on 2022-10-29 and later recalled because of a kernel issue.

   Root cause

   Software defect

   Component

   Node operating system imageLinux kernelkubeletAWS VPC CNINode launch templateTerraform

   Contributing factor

   No staged rolloutAutomation amplificationOverlapping failuresMonitoring blind spotNo health probes

   Detection

   The team noticed nodes flapping between NodeNotReady and NodeReady ("KubeletNotReady PLEG is not healthy") at 14:30 UTC while watching the stalled vpc-cni upgrade, about seven hours after the rollover. Time to detection was 7 hours. Alerting did not catch the NodeNotReady events or the socket growth.

   Remediation

   • cordoned, drained and deleted 15 stuck nodes one at a time to complete the vpc-cni upgrade
   • changed the Terraform infrastructure-modules so a specific AMI could be set
   • rolled the EC2 Auto Scaling group launch configuration back to the previous known good AMI through the pipeline

   Action items

   • Reach out to teams with suggestions about readiness and liveness probes
   • Create a dashboard for readiness and liveness probe coverage
   • Write a wiki article on readiness and liveness probes and their usefulness
   • Modify infrastructure-modules to allow specifying a particular AMI
   • Schedule a discussion on whether to take the latest AMI immediately and how to test new AMIs before they are deployed
   • Implement alerting on abnormal NodeNotReady events and on increased socket use
   • Create a learning path for Kubernetes within the team
   • Collect logs from nodes centrally
   • Create a Prometheus exporter that retrieves the latest available AMI, with a dashboard and alerts

   Lessons

   When a new node AMI has just been rolled out, upgrading other cluster components on the same day makes it hard to tell which change is causing trouble; here the vpc-cni upgrade on the same day confused matters. Taking the latest AMI automatically with no way to pin one meant a rollback first needed a Terraform change. The team also concluded that it needs better communication paths with application teams during incidents.

   View case

By root cause8