Cases46 cases

11 to 15 of 46

1. IL-0130 Deployments of large models from Vertex Model Garden failed with "Model server never became ready" in most regions for 13 days after a storage provisioning configuration change

   Google Cloud2024

   Symptoms

   From 22 October 2024 at 14:08 US/Pacific, customers deploying large models, those that need more than 100 GB of disk, through Vertex AI Online Prediction (Vertex Model Garden deployments) had their deployments fail with the error "Model server never became ready".

   Deploys failing

   Trigger

   A recent change introduced an internal storage provisioning configuration error.

   Root cause

   Configuration change

   Component

   –

   Contributing factor

   –

   Detection

   The incident began on 22 October 2024 at 14:08 but was first posted on the status page on 4 November 2024 at 13:17 US/Pacific, about 13 days later. The first post said large Vertex Model Garden deployments (greater than 100GB) on a GKE Autopilot cluster might fail.

   Remediation

   • rolled back the configuration change that introduced the storage provisioning error

   Lessons

   A configuration error that affects only one class of deployments, here models needing more than 100 GB of disk, can stay in place across most regions for almost two weeks. The visible symptom, a model server that never becomes ready, does not point at storage provisioning, and the fix was to roll the configuration back. The report lists no follow-up actions.

   View case
2. IL-0114 An unpinned AWS VPC CNI plugin was updated automatically during a capacity expansion, leaving new pods Pending without IP addresses and stopping CoW Protocol settlements for about 3.5 hours

   CoW Protocol2024

   Symptoms

   At 16:40 UTC on 19 April 2024 CoW Protocol's mainnet production environment stopped producing settlements; the outage officially began then.

   Pods PendingIP address exhaustionPod evictionService outage

   Trigger

   During a cluster capacity expansion, the Infrastructure as Code automation updated the AWS VPC CNI plugin, because the CNI version was not hardcoded in the IaC and the IaC library version had recently changed.

   Root cause

   Configuration change

   Component

   AWS VPC CNINode pool

   Contributing factor

   Unpinned versionOverlapping failures

   Detection

   The CNI version mismatch was identified as the cause at 17:03 UTC, 23 minutes after settlements stopped.

   Remediation

   • upgraded the Kubernetes cluster
   • set up new node groups with a new version of the networking plugin

   Lessons

   Versions in IaC scripts should be specified explicitly so an automation run cannot update a component such as the CNI plugin unintentionally. Changes in production need change management that is easy to revert.

   View case
3. IL-0152 An incorrect configuration applied during maintenance made an internal infrastructure cluster automatically delete the control planes of 200 DOKS clusters in FRA1

   DigitalOcean2024

   Symptoms

   At 13:02 UTC on 2024-01-23 DigitalOcean posted that, as of 12:18 UTC, its engineers were investigating an issue with Kubernetes clusters in the FRA1 region and that users might see errors when communicating with their clusters. The control planes of the affected DOKS (DigitalOcean Kubernetes) clusters had become inaccessible.

   Resources deletedControl plane unresponsive

   Trigger

   An incorrect configuration was applied to an internal infrastructure cluster in FRA1 at 12:21 UTC during a maintenance operation.

   Root cause

   Configuration change

   Component

   etcdKubernetes API server

   Contributing factor

   Automation amplificationNo safeguard on destructive changeExcessive blast radius

   Detection

   Engineers were investigating errors with Kubernetes clusters in FRA1 as of 12:18 UTC and identified the incorrect configuration as the cause at 12:36.

   Remediation

   • restored each affected cluster's etcd from its latest twice-daily backup
   • restored the stateless control plane components after etcd
   • patched the recovery mechanism after unexpected problems during recovery
   • found and fixed an additional small bug during recovery
   • contacted affected customers directly with further instructions, since some might need to reconfigure Kubernetes resources

   Action items

   • Prevent automatic deletion of infrastructure cluster resources under any circumstances in the production environment

   Lessons

   When managed control planes run as resources in another cluster, one configuration mistake in that cluster can delete hundreds of control planes at once through ordinary automation. The etcd backups limited the damage, but their twice-daily schedule set the worst case at 12 hours of lost control plane state, and the recovery tooling itself needed patching during the incident.

   View case
4. IL-0153 DOKS worker nodes went NotReady at 06:00 UTC on three days because a systemd timer in the Debian image ran apt upgrade and killed it mid kernel upgrade, breaking node networking

   DigitalOcean2023

   Symptoms

   Customers of DigitalOcean Managed Kubernetes (DOKS) saw worker nodes go NotReady between 06:00 and 07:00 UTC and stay unavailable, taking down the services on them, until the nodes were replaced or rebooted; some nodes needed several replacements or reboots. The first sporadic reports on October 8 said replacing the node fixed it. The same thing happened again around 06:00 UTC on October 9, more widely and across many regions, and again on October 10. Only clusters on versions 1.27.6-do.0 and 1.28.2-do.0 were affected.

   Node NotReadyService outage

   Trigger

   A systemd timer in the DigitalOcean Debian image started apt upgrade daily at 06:00 UTC, with a random delay of up to 60 minutes.

   Root cause

   Configuration change

   Component

   Node operating system imageLinux kernelkubelet

   Contributing factor

   Unreviewed defaultsLimited debug accessChange with a delayed effect

   Detection

   Sporadic customer reports of failed worker nodes arrived at 07:43 UTC on October 8; internal incident response started at 07:10 UTC on October 9 after broader impact across regions.

   Remediation

   • Advised customers to replace or reboot affected worker nodes
   • Arranged SSH and console access to worker nodes while they were healthy, and live-debugged an affected node on October 10
   • Released a DaemonSet to all affected clusters that disables the apt upgrade systemd timer on every worker node
   • Released new node images without the auto-update process

   Action items

   • Disable the timer during node provisioning, then remove the DaemonSet from all clusters
   • Add a check to the internal conformance test suite for new cluster versions that the auto-upgrade process and other unwanted timers stay disabled
   • Support logging into worker nodes even when normal access paths are broken

   Lessons

   An operating system auto-update timer left enabled in a node image can change the kernel and systemd underneath Kubernetes, and a timeout that kills the upgrade half-way can leave a node without networking. Failures that start at the same time every day point to a scheduled job on the nodes, and systemd timers belong on that list next to cron jobs. When the failure takes out a node's network, an investigation that depends on logging into the node stalls; access paths that work while the node is broken shorten diagnosis.

   View case
5. IL-0019 An EKS Terraform module upgrade shrank node root disks from 100 GB to 20 GB and image pulls failed with no space left on device

   UK Ministry of Justice2023

   Symptoms

   At 13:42 the RootVolUtilisation-Critical alert fired in the high-priority alerts channel. At 14:03 a user reported image pull errors with the message "no space left on device".

   Node disk fullImage pull failuresPod evictionPods stuck in ContainerCreatingIP address exhaustion

   Trigger

   Upgrading the EKS Terraform module to version 18, which changed the node launch template, and draining workloads onto the new nodes it created.

   Root cause

   Configuration change

   Component

   Node root diskNode launch templateNode poolAWS VPC CNICoreDNS

   Contributing factor

   Missed in reviewNo configuration testsNo alert on limit

   Detection

   The RootVolUtilisation-Critical alert fired in the high-priority alerts channel at 13:42, and a user reported "no space left on device" image pull errors at 14:03.

   Remediation

   • Uncordoned the old default node group and drained the new nodes to move workloads back
   • Identified the launch template change that cut the root volume to 20 GB and applied a fix on the manager and live clusters
   • Drained the old node group onto the fixed nodes

   Action items

   • Update the runbook to compare launch template changes during an EKS module upgrade
   • Create a test setup that pulls images of different sizes, like live
   • Update the RootVolUtilisation alert runbook to check the disk space configuration
   • Scale CoreDNS dynamically based on the number of nodes
   • Investigate whether IPv6 can solve the IP prefix starvation problem
   • Add drift testing to identify when a terraform plan shows a change to the launch template
   • Set up logging for the CNI and ipamd logs and alerts on errors related to IP prefix starvation

   Lessons

   The write-up lists review actions rather than lessons. They aim at two gaps: the launch template changes brought by a module upgrade were not compared or drift-tested before rollout, and there were no CNI or ipamd logs or alerts to show the IP prefix starvation the team suspected during the drain.

   View case

By root cause1