Cases17 cases

11 to 15 of 17

1. IL-0194 After a kube-apiserver restart, pod LIST requests from every pod of a Vector DaemonSet nearly tripled etcd memory and restarted all master nodes

   Palark2023

   Symptoms

   One evening, right after an ordinary restart of kube-apiserver in a customer's production cluster, etcd memory consumption rose almost threefold. The sudden growth led to a cascading restart of all the master nodes.

   Control plane unresponsiveDatabase overload

   Trigger

   An ordinary restart of kube-apiserver, after which every pod of the log collector DaemonSet sent its list requests at the same time.

   Root cause

   Capacity exhaustion

   Component

   etcdKubernetes API serverTelemetry agent

   Contributing factor

   Unknown limitUnreviewed defaults

   Detection

   Memory graphs showed etcd memory on the master nodes almost tripling after a kube-apiserver restart; the audit logs then pointed to one DaemonSet's list requests.

   Remediation

   • created a PriorityLevelConfiguration named limit-list-custom that queues requests (assuredConcurrencyShares 5, 16 queues, handSize 4, queueLengthLimit 50)
   • created a FlowSchema that routes list and get requests on pods from the log collector's service account to that priority level

   Action items

   • Submit a pull request adding resource version support to the Kubernetes Rust library
   • Open a pull request to the Vector log collector to address the startup list requests
   • Apply the same flow-control approach to a similar problem found with the Cilium CNI

   Lessons

   A field selector reduces what kube-apiserver returns, not what it reads from etcd: listing the pods of one node still reads every pod in the cluster. A DaemonSet whose pods all list at startup multiplies that by the node count each time kube-apiserver restarts. Where exact freshness is not needed, resourceVersion=0 lets kube-apiserver answer from its cache; where the client cannot set it, API Priority and Fairness can queue the requests so they reach etcd gradually.

   View case
2. IL-0015 A GKE cluster's /16 pod address range ran out at 256 nodes, leaving new pods Pending and node scale-ups failing

   loveholidays2020

   Symptoms

   A colleague wrote in Slack that his application was taking a long time to deploy. A deployment that normally finishes in minutes had been running for about an hour: about half of the new pods were running and serving traffic, and the other half were Pending.

   Pods PendingIP address exhaustionScale-up failure

   Trigger

   The cluster reaching 256 nodes, the most its /16 pod secondary range could hold at 256 addresses per node; every further node creation failed.

   Root cause

   Capacity exhaustion

   Component

   VPC subnet or pod address rangeCluster autoscalerNode pool

   Contributing factor

   Unreviewed defaultsUnknown limit

   Detection

   A colleague reported in Slack that a deployment was slow; the pending pods' events and the cluster autoscaler status ConfigMap showed the exhausted IP space.

   Remediation

   • lowered the maximum pods per node on selected node pools, cutting IP consumption by about 30%
   • moved some node pools to larger instance types

   Action items

   • Lower the maximum pods per node on node pools that do not run many pods
   • Use larger instance types in some node pools

   Lessons

   In a VPC-native GKE cluster the number of nodes, not the number of pods, uses up the pod range: by default each node reserves 256 addresses, so even a /16 is full at 256 nodes. Maximum pods per node and node size are the practical levers; larger nodes pack better but take more pods down when they fail.

   View case
3. IL-0033 Uneven load across kube-dns pods and a DNS packets-per-second limit pushed service latency to 20 seconds

   Airbnb2019

   Symptoms

   On May 10 the latency graphs of several services showed a few spikes of up to about one second, then latency climbed to five seconds and then to 20 seconds, and it stayed there for a long time. The same pattern appeared on many services, not just one.

   High latencyIntermittent timeoutsLoad imbalanceDNS resolution failures

   Trigger

   Several services sent a high volume of external DNS queries, all of which went through kube-dns.

   Root cause

   Capacity exhaustion

   Component

   kube-dnskube-proxyClient-side DNS resolver and cache

   Contributing factor

   Unreviewed defaults

   Detection

   Latency graphs of several services showed the rise; engineers then looked at load per kube-dns pod.

   Lessons

   By default a pod discovers DNS through the kube-dns cluster IP and uses the ClusterFirst policy, so even external lookups go through kube-dns. If a pod does not need cluster DNS, set its dnsPolicy to Default or None. Check the DNS policy early and often. iptables picks backends at random and is not a load balancer, so pods behind a cluster IP, kube-dns included, can carry very different loads.

   View case
4. IL-0002 CI builder pods could not get AWS IAM credentials because kubelet fell minutes behind its API rate limit

   Zalando2019

   Symptoms

   Builds on Zalando's in-house Continuous Delivery Platform (CDP), which runs CI/CD on Kubernetes, timed out and failed for almost an hour on 11 June 2019. The Kubernetes builder pods could not get AWS IAM credentials.

   High error rateCredentials unavailableControl plane lag

   Trigger

   An unlucky rescaling of the CDP Kubernetes cluster left only one node available for builder pods. Builder pods were created and deleted on that node so quickly that kubelet fell behind.

   Root cause

   Capacity exhaustion

   Component

   kubeletCredential broker for podsKubernetes API serverCI system

   Contributing factor

   Unreviewed defaultsSingle point of failure

   Remediation

   • Scaled the CDP cluster up by hand so builder pods spread over more than one node

   Action items

   • Raise the kubelet QPS limit from the default 5 to 50 in the global cluster configuration

   View case
5. IL-0076 Kubernetes masters went down after Dex filled etcd with AuthRequest objects and deleting its namespace started an endless list-and-timeout loop

   Fullstaq2019

   Symptoms

   Dex, the OIDC proxy that handled Kubernetes authentication, stored its data in the Kubernetes API (storage type kubernetes, inCluster: true) and had built up a huge number of AuthRequest objects. Listing all AuthRequests timed out, and without the list they could not be deleted.

   Control plane unresponsiveMonitoring outage

   Trigger

   The dex namespace was deleted so that Kubernetes would clean up the accumulated AuthRequest objects itself.

   Root cause

   Capacity exhaustion

   Component

   Kubernetes API serveretcdCluster authentication provider

   Contributing factor

   Unreviewed defaultsHarmful manual actionRetry stormLimited debug accessIgnored early signal

   Detection

   The speaker says he had got hints of the problem earlier. While the masters were down, plenty of alerts arrived in Slack, but monitoring could not be reached because authentication and port-forwarding no longer worked.

   Remediation

   • removed the kubernetes finalizer from the dex namespace by calling the API directly (kill-kube-ns)
   • deployed Dex to a new namespace with sane defaults

   Lessons

   Dex with Kubernetes as its storage keeps every AuthRequest as an API object, and with a long TTL they pile up until the API cannot list them. Deleting a namespace that holds that many objects makes Kubernetes list them in a loop and can overload the masters. Monitoring that is reached through cluster authentication is lost when authentication is what broke.

   View case

By root cause1