Cases20 cases

16 to 20 of 20

1. IL-0026 Kubernetes nodes hit SystemOOM because fluentd-sumologic log shipper pods had no memory limits

   Blue Matador2019

   Symptoms

   On a Saturday at 5:12 pm, Blue Matador's own monitoring raised a SystemOOM event for one node in the production Kubernetes cluster. Four minutes later a second warning reported a low EBS Burst Balance on that node's root volume. CloudWatch data showed the burst balance had actually bottomed out at 5:02 pm, before the memory event; the warning arrived late because EBS metrics lag 10 to 15 minutes.

   OOMKilled

   Trigger

   Memory use of the fluentd-sumologic log shipper pods grew until the node ran out of memory; log volume in Sumo Logic had been steady, so a burst of logs was not the cause.

   Root cause

   Capacity exhaustion

   Component

   Telemetry agentContainer memory limit

   Contributing factor

   No resource requests or limitsIgnored early signal

   Detection

   Blue Matador's own monitoring product alerted on the SystemOOM event, followed minutes later by a low EBS Burst Balance warning for the same node.

   Remediation

   • restarted all fluentd-sumologic pods so they started with low memory
   • set RUBY_GC_HEAP_OLDOBJECT_LIMIT_FACTOR to 0.9 on the fluentd-sumologic pods
   • added memory requests of 128Mi and limits of 1024Mi, and CPU requests of 100m and limits of 250m, to the fluentd-sumologic pods

   Action items

   • Apply default resource limits and resource quotas so that every pod runs with requests and limits

   Lessons

   When checking for restarted pods, look in every namespace, not only the application one. Set resource requests and limits on every pod, third-party ones in particular, so that one workload cannot exhaust a node. Investigate side signals such as the disk I/O spike while the logs still exist.

   View case
2. IL-0035 Worker nodes went NotReady after a new ElastAlert rule without memory limits used up node memory

   NU.nl2019

   Symptoms

   The NU.nl development team got reports that several services on one of its Kubernetes clusters behaved erratically: occasional error pages, slow responses and timeouts. The affected services were mostly internal tools and dashboards.

   Node NotReadyHigh error rateHigh latencyIntermittent timeoutsMonitoring outageOOMKilled

   Trigger

   A new ElastAlert rule, deployed shortly before from the command line, that fired if the Cloudfront-* Elasticsearch indexes stopped receiving documents; those indexes take a few million requests per hour, and the rule made ElastAlert's memory grow without bound.

   Root cause

   Configuration change

   Component

   Container memory limitkubeletPrometheus

   Contributing factor

   No resource requests or limitsUnreviewed defaultsNo alert on limitMonitoring blind spotExcessive blast radius

   Detection

   Users reported error pages, slow responses and timeouts from several services; no alert fired.

   Remediation

   • terminated the NotReady nodes one by one so the auto-scaling group replaced them (the new nodes also went NotReady, but Prometheus and Grafana landed on a stable node)
   • found the ElastAlert pods' memory growth on the Grafana pod memory dashboard
   • fixed the ElastAlert problem that caused the memory growth

   Action items

   • Define alerts on resource usage such as CPU, memory and disk space
   • Keep researching an alerting strategy that combines Elasticsearch, Prometheus Alertmanager and New Relic
   • Consider exporting metrics out of the cluster and running Grafana outside it, on EC2 or a separate Kubernetes cluster
   • Either visualise the important metrics in the ELK stack or make Prometheus and Grafana more available, and improve the metrics strategy
   • Set resource limits for ElastAlert through the Helm values
   • Configure namespaces with default memory requests and limits
   • Isolate customer-facing workloads from build, logging and monitoring workloads (a dedicated node group, or later a separate tools cluster)
   • Deploy everything through automation such as Jenkins pipelines, and consider a GitOps approach
   • Deploy through a pipeline that includes a smoke test step
   • Make Kubernetes and cloud infrastructure work part of the team's sprints, picked up by all team members while pairing with more experienced members, and hold workshops that go deep into specific topics

   Lessons

   Fixing the root cause covers only a small part of what an incident can teach; the chain of smaller failures around it is where most of the learning is. A pod without a memory limit can take whole nodes down, so limits need defaults at the namespace level. Monitoring that runs inside the cluster it watches goes blind with it. Changes installed by hand from the command line leave the rest of the team without a record of what changed.

   View case
3. IL-0001 Cluster-wide DNS outage after CoreDNS pods were OOM-killed again and again under a burst of DNS queries

   Zalando2019

   Symptoms

   Customers of the Zalando Fashion Store got a high rate of errors on all web product pages and outfit pages for more than an hour. The errors came from the main data aggregation layer service, which runs in one of Zalando's Kubernetes clusters.

   High error rateDNS resolution failuresOOMKilledMonitoring outage

   Trigger

   Calls from the aggregation layer to a single, not very important downstream service started timing out. The aggregation layer returned 404s for them, clients retried, and the resulting spike in requests became a spike in DNS queries to CoreDNS.

   Root cause

   Capacity exhaustion

   Component

   CoreDNSContainer memory limitClient-side DNS resolver and cache

   Contributing factor

   Unknown limitNo cachingRetry stormUnreviewed defaultsExcessive blast radiusMonitoring blind spot

   Detection

   The on-call engineer for the aggregation layer phoned the on-call Kubernetes engineer. Automatic paging did not happen because the cluster's monitoring and alerting ran inside the cluster and failed along with DNS. The Kubernetes engineer then saw that the CoreDNS pods were being OOM-killed.

   Remediation

   • Raised the CoreDNS memory requests and limits by hand from 100Mi to 2000Mi

   Action items

   • Introduce a more resilient DNS setup: CoreDNS fronted by dnsmasq on every node
   • Improve high-level alerting from outside the clusters, so that a cluster problem is known before or at the same time as applications are affected
   • Improve incident response processes and tooling so that any on-call engineer can escalate directly to other teams when automatic paging fails, for example through a chat bot

   Lessons

   The Kubernetes DNS setup was far from resilient enough: a single application could take down DNS for everything in the cluster. The blast radius of one application sending more DNS queries should be limited to one node at most, ideally to single pods. Known Kubernetes DNS problems, such as Linux kernel races in conntrack handling and the ndots 5 problem, were familiar to the team and partly mitigated, but their combined effect on the DNS infrastructure was worse than the team had understood. Monitoring that runs inside the cluster was not robust enough: when the cluster's DNS broke, it could not page anyone, and recovery took longer than it should have.

   View case
4. IL-0503 mybinder.org launches failed after a GKE node ran out of memory and its nginx-ingress proxy pod crash-looped

   Binder Project2017

   Symptoms

   On 30 November 2017 at 16:59 PST, mybinder.org operators noticed that Grafana looked wrong and that launching a new server failed with an error that a temporary user could not be created. Pods that were already running kept running, but no new ones were being created.

   Service outageContainer crash loopProbe failuresOOMKilled

   Trigger

   A build container, which ran without a memory limit, most likely used up all the memory on the node that ran the proxy pod.

   Root cause

   Capacity exhaustion

   Component

   Ingress controllerContainer memory limitJupyterHub

   Contributing factor

   No resource requests or limitsHarmful manual actionNo alert on limit

   Detection

   An operator happened to look at Grafana at 16:59 PST, saw that it looked wrong, and confirmed the error by launching a new server.

   Remediation

   • Cordoned the node that had run out of memory
   • Uncordoned the node once the proxy was working

   Action items

   • Limit the memory available to build pods
   • Change the JupyterHub configuration so user pods are not cleaned up when the jupyterhub pod restarts
   • Nominate one person to drive the response, possibly in a shared terminal, so only one person changes the cluster
   • Alert when something is wrong with the cluster, for example by counting 4xx responses on the jupyterhub pod

   View case
5. IL-0468 New JupyterHub student pods stuck Pending on MaxVolumeCount after a memory limit cut with node size unchanged

   UC Berkeley2017

   Symptoms

   On 20 March 2017, from some time early in the day until about 13:00, some new student servers on UC Berkeley's JupyterHub stayed in Pending forever and the students got 500 errors that kept them from logging in.

   Pods PendingHigh error rate

   Trigger

   On 18 March at 16:30 the RAM per student was reduced from 2G to 1G to save resources while the nodes kept the same size of 26G RAM, and as a result the nodes hit the Google Cloud the limit on the number of disks per node.

   Root cause

   Capacity exhaustion

   Component

   Container memory limitCloud block storageNode pool

   Contributing factor

   Unknown limit

   Detection

   New student servers reported a 500 error that kept students from logging in. At 12:44 this was judged widespread, and at 12:53 `kubectl describe pod` showed the pods Pending on MaxVolumeCount.

   Remediation

   • Copied the Google Container Engine instance template and changed it to spawn smaller n1-highmem-2 nodes
   • Switched the managed instance group to the new template
   • Grew the instance group by 30 new nodes
   • Ran populate.bash so student pods would start on time on the new nodes
   • Stopped the simple autoscaler
   • Stopped and started affected user pods from the control panel
   • Restarted the hub and proxy pods

   Action items

   • Follow the status of kubernetes/kubernetes issue 24317
   • Find and fix the cause of the 'too many redirects' error in JupyterHub
   • Delete the older, larger nodes that are no longer in use
   • Alert when any pods stay Pending for a non-negligible time

   View case

By root cause4