Cases8 cases

3 to 7 of 8

1. IL-0153 DOKS worker nodes went NotReady at 06:00 UTC on three days because a systemd timer in the Debian image ran apt upgrade and killed it mid kernel upgrade, breaking node networking

   DigitalOcean2023

   Symptoms

   Customers of DigitalOcean Managed Kubernetes (DOKS) saw worker nodes go NotReady between 06:00 and 07:00 UTC and stay unavailable, taking down the services on them, until the nodes were replaced or rebooted; some nodes needed several replacements or reboots. The first sporadic reports on October 8 said replacing the node fixed it. The same thing happened again around 06:00 UTC on October 9, more widely and across many regions, and again on October 10. Only clusters on versions 1.27.6-do.0 and 1.28.2-do.0 were affected.

   Node NotReadyService outage

   Trigger

   A systemd timer in the DigitalOcean Debian image started apt upgrade daily at 06:00 UTC, with a random delay of up to 60 minutes.

   Root cause

   Configuration change

   Component

   Node operating system imageLinux kernelkubelet

   Contributing factor

   Unreviewed defaultsLimited debug accessChange with a delayed effect

   Detection

   Sporadic customer reports of failed worker nodes arrived at 07:43 UTC on October 8; internal incident response started at 07:10 UTC on October 9 after broader impact across regions.

   Remediation

   • Advised customers to replace or reboot affected worker nodes
   • Arranged SSH and console access to worker nodes while they were healthy, and live-debugged an affected node on October 10
   • Released a DaemonSet to all affected clusters that disables the apt upgrade systemd timer on every worker node
   • Released new node images without the auto-update process

   Action items

   • Disable the timer during node provisioning, then remove the DaemonSet from all clusters
   • Add a check to the internal conformance test suite for new cluster versions that the auto-upgrade process and other unwanted timers stay disabled
   • Support logging into worker nodes even when normal access paths are broken

   Lessons

   An operating system auto-update timer left enabled in a node image can change the kernel and systemd underneath Kubernetes, and a timeout that kills the upgrade half-way can leave a node without networking. Failures that start at the same time every day point to a scheduled job on the nodes, and systemd timers belong on that list next to cron jobs. When the failure takes out a node's network, an investigation that depends on logging into the node stalls; access paths that work while the node is broken shorten diagnosis.

   View case
2. IL-0112 The daily node rollover put DFDS's EKS nodes on an AMI later recalled for a kernel issue, causing "PLEG is not healthy" NodeNotReady flaps and pod network timeouts

   DFDS2022

   Symptoms

   On 2022-10-31 a planned upgrade of the vpc-cni EKS add-on, started from the deployment pipeline at 13:45 UTC, timed out at 14:10. Only about 10 of the 45 aws-node pods had upgraded, 5 were stuck in Terminating and the other 30 had not been attempted.

   Node NotReadyUpgrade stallIntermittent timeoutsIntermittent connection failures

   Trigger

   At 07:30 UTC on 2022-10-31 the daily node rollover replaced the existing nodes with nodes built from AMI v20221027, the latest AWS EKS node AMI, released on 2022-10-29 and later recalled because of a kernel issue.

   Root cause

   Software defect

   Component

   Node operating system imageLinux kernelkubeletAWS VPC CNINode launch templateTerraform

   Contributing factor

   No staged rolloutAutomation amplificationOverlapping failuresMonitoring blind spotNo health probes

   Detection

   The team noticed nodes flapping between NodeNotReady and NodeReady ("KubeletNotReady PLEG is not healthy") at 14:30 UTC while watching the stalled vpc-cni upgrade, about seven hours after the rollover. Time to detection was 7 hours. Alerting did not catch the NodeNotReady events or the socket growth.

   Remediation

   • cordoned, drained and deleted 15 stuck nodes one at a time to complete the vpc-cni upgrade
   • changed the Terraform infrastructure-modules so a specific AMI could be set
   • rolled the EC2 Auto Scaling group launch configuration back to the previous known good AMI through the pipeline

   Action items

   • Reach out to teams with suggestions about readiness and liveness probes
   • Create a dashboard for readiness and liveness probe coverage
   • Write a wiki article on readiness and liveness probes and their usefulness
   • Modify infrastructure-modules to allow specifying a particular AMI
   • Schedule a discussion on whether to take the latest AMI immediately and how to test new AMIs before they are deployed
   • Implement alerting on abnormal NodeNotReady events and on increased socket use
   • Create a learning path for Kubernetes within the team
   • Collect logs from nodes centrally
   • Create a Prometheus exporter that retrieves the latest available AMI, with a dashboard and alerts

   Lessons

   When a new node AMI has just been rolled out, upgrading other cluster components on the same day makes it hard to tell which change is causing trouble; here the vpc-cni upgrade on the same day confused matters. Taking the latest AMI automatically with no way to pin one meant a rollback first needed a Terraform change. The team also concluded that it needs better communication paths with application teams during incidents.

   View case
3. IL-0035 Worker nodes went NotReady after a new ElastAlert rule without memory limits used up node memory

   NU.nl2019

   Symptoms

   The NU.nl development team got reports that several services on one of its Kubernetes clusters behaved erratically: occasional error pages, slow responses and timeouts. The affected services were mostly internal tools and dashboards.

   Node NotReadyHigh error rateHigh latencyIntermittent timeoutsMonitoring outageOOMKilled

   Trigger

   A new ElastAlert rule, deployed shortly before from the command line, that fired if the Cloudfront-* Elasticsearch indexes stopped receiving documents; those indexes take a few million requests per hour, and the rule made ElastAlert's memory grow without bound.

   Root cause

   Configuration change

   Component

   Container memory limitkubeletPrometheus

   Contributing factor

   No resource requests or limitsUnreviewed defaultsNo alert on limitMonitoring blind spotExcessive blast radius

   Detection

   Users reported error pages, slow responses and timeouts from several services; no alert fired.

   Remediation

   • terminated the NotReady nodes one by one so the auto-scaling group replaced them (the new nodes also went NotReady, but Prometheus and Grafana landed on a stable node)
   • found the ElastAlert pods' memory growth on the Grafana pod memory dashboard
   • fixed the ElastAlert problem that caused the memory growth

   Action items

   • Define alerts on resource usage such as CPU, memory and disk space
   • Keep researching an alerting strategy that combines Elasticsearch, Prometheus Alertmanager and New Relic
   • Consider exporting metrics out of the cluster and running Grafana outside it, on EC2 or a separate Kubernetes cluster
   • Either visualise the important metrics in the ELK stack or make Prometheus and Grafana more available, and improve the metrics strategy
   • Set resource limits for ElastAlert through the Helm values
   • Configure namespaces with default memory requests and limits
   • Isolate customer-facing workloads from build, logging and monitoring workloads (a dedicated node group, or later a separate tools cluster)
   • Deploy everything through automation such as Jenkins pipelines, and consider a GitOps approach
   • Deploy through a pipeline that includes a smoke test step
   • Make Kubernetes and cloud infrastructure work part of the team's sprints, picked up by all team members while pairing with more experienced members, and hold workshops that go deep into specific topics

   Lessons

   Fixing the root cause covers only a small part of what an incident can teach; the chain of smaller failures around it is where most of the learning is. A pod without a memory limit can take whole nodes down, so limits need defaults at the namespace level. Monitoring that runs inside the cluster it watches goes blind with it. Changes installed by hand from the command line leave the rest of the team without a record of what changed.

   View case
4. IL-0074 All AirMap platform services down as worker nodes went NotReady and pods crash-looped on network and DNS failures

   AirMap2018

   Symptoms

   At about 15:00 UTC on 19 July 2018, monitoring alerted on rising 5xx responses from several APIs, most notably pilot and tiles. Logins failed first, because the pilot service fetches the user's profile, and from there all services became unresponsive. Every affected API ran on the production Kubernetes cluster.

   High error rateNode NotReadyDNS resolution failuresContainer crash loopService outage

   Root cause

   Software defect

   Component

   kubelet

   Contributing factor

   Unpatched known bug

   Detection

   Monitoring alerted on an increase in 5xx responses from several APIs, most notably pilot and tiles.

   Remediation

   • restarted the kubelets on the stuck worker nodes, which did not last
   • restarted all worker nodes in a staggered order starting at about 18:00 UTC, which took about 1.5 hours

   Action items

   • Restart nodes on a rolling schedule to keep nodes and kubelets healthy until the fixes land upstream and reach the cloud provider, Microsoft Azure

   Lessons

   When nodes keep falling back to NotReady after kubelet restarts and pods fail on network and DNS errors, a known upstream bug may be the cause; matching the symptoms to the upstream issue tracker, with help from the community, found the cause and the fix candidates.

   View case
5. IL-0038 kubelet rollout hit a Kubernetes bug and left every node in a cluster NotReady, triggering mass pod eviction

   Oath2018

   Symptoms

   During a rolling update of a kubelet change in one of Oath's on-premises production clusters, nodes started going NotReady, and soon all nodes in the cluster were NotReady.

   Node NotReadyPod evictionPods Pending

   Trigger

   A change to kubelet was rolled out across the nodes of one cluster; on restart, kubelet cleans up transient cgroup files, and a Kubernetes bug in that step left kubelet stuck instead of starting.

   Root cause

   Software defect

   Component

   kubeletKubernetes controller manager

   Contributing factor

   No health probesExcessive blast radius

   Detection

   Nodes reported NotReady and the eviction graphs climbed while the kubelet rollout was in progress.

   Remediation

   • failed the affected data center over so users were routed to the next available data center

   Action items

   • Run a functional test of kubelet after each upgrade batch and certify it before the next 30% of nodes are updated

   Lessons

   Check kubelet after upgrading it before moving to the next batch; a simple curl against the kubelet API would have caught this. The node controller's eviction throttling and full disruption mode, which the speakers note is not well documented, kept a cluster-wide kubelet failure from evicting every pod.

   View case

By root cause4