Cases7 cases

4 to 7 of 7

1. IL-0591 Gitpod workspaces in all regions became IO bound and unresponsive for days after the ws39 workspace cluster release

   Gitpod2022

   Symptoms

   From April 11, 2022 at 13:17 UTC customers and Gitpod staff reported that Gitpod workspaces were intermittently becoming unresponsive. CPU usage of nodes and pods looked normal, with nothing maxed out, and at 13:58 UTC the team found that the workspaces were IO bound rather than CPU bound.

   Throughput degradationSustained high node CPUNode NotReadyData loss

   Trigger

   The ws39 generation of workspace clusters, released to all regional clusters on April 8th at 20:08 UTC and to the XL clusters on April 9th at 17:45 UTC, split the 1TB disk into smaller RAID0 disks, changed CPU limiting and workspace networking, and moved to faster machine types.

   Root cause

   Faulty deployment

   Component

   Node root diskContainer CPU limit

   Contributing factor

   No staged rolloutGap in automated testsUnrepresentative stagingUnknown limitOverlapping failuresIneffective rollbackHarmful manual actionLimited debug access

   Detection

   Customers and Gitpod staff reported on April 11th at 13:17 UTC that workspaces were intermittently unresponsive, and the team opened an incident in Slack through its incident.io integration. On April 17th the team noticed increased CPU load on the workspace nodes and opened an internal incident.

   Remediation

   • Shifted workspace starts back to the ws38 clusters on April 11th
   • Built ws39a clusters with c2d machines and local SSDs and moved traffic to them
   • Requested a limit increase from Let's Encrypt
   • Routed EU XL traffic to the regional EU cluster and built ws-eu39bxl to replace the crashed ws-eu39xl
   • Cleaned up workspaces stuck in a stopping state so users could start them again
   • Released ws40 with 1TB boot disks to get more IO bandwidth
   • Removed the workspaces that consumed excessive CPU time for crypto-mining
   • Blocked the fraudulent users behind the crypto-mining from using Gitpod
   • Rolled back the ws-daemon change that broke CPU limiting and shipped the fix in the ws34 clusters
   • Blocked ACME HTTP requests to workspace ports so Let's Encrypt rate limits would not be hit again
   • Rolled out IO limiting with the ws41xl and ws41 clusters and moved traffic to them step by step

   Action items

   • Invest in test automation so that test results stop releases like this one
   • Vary the interval between traffic shifts to new clusters, with more time for larger releases
   • Add a risk assessment stage, to be automated, that governs changeset size and rollout speed of workspace cluster rollouts
   • Reduce the impact teams have on each other
   • Add review criteria that find backwards incompatible changes before pull requests are merged, and split such pull requests
   • Recommend rollback as the primary means of mitigation in the incident procedures, and look at automating it
   • Make the status page show the workspace service as down when it is, and update the playbooks
   • Keep incident communication in a single Slack channel and Google Meet
   • Put 10% of the engineering staff on the on-call rotation from May 9th and use that time on observability, alerting and stability

   Lessons

   Gitpod concluded that it should have committed to rolling back on April 11th instead of building and shipping fixes, which kept customers on degraded workspaces longer than necessary. A large release so soon after the previous one needed a risk assessment and slower traffic shifts, and backwards incompatible changes that block a rollback need to be found before pull requests are merged. Failure-free operations require experience with failure.

   View case
2. IL-0193 A GCP persistent disk degradation took down a Cassandra StatefulSet whose OrderedReady policy blocked recovery, and Metrictank could not reconnect to the recreated pods, causing a 23-hour Graphite query outage

   Grafana Labs2019

   Symptoms

   An alert fired because some Metrictank instances could not drain their write queue, which meant they could not write to Cassandra. Google had not yet published an incident, but a team member's Discord server, also hosted on GCP, was down, which pointed at GCP; Google confirmed an SSD persistent disk incident about 90 minutes after it began.

   High error rateNode NotReadyPods PendingService outage

   Trigger

   A Google Cloud incident in which SSD persistent disks performed so poorly that many I/O operations failed for an extended period.

   Root cause

   Cloud provider outage

   Component

   Persistent volumes and stateful setsDatabaseNode root disk

   Contributing factor

   Overlapping failuresUnpatched known bugUnverified assumption

   Detection

   An alert that Metrictank write instances could not flush their write queue to Cassandra. Error rates alone rose too slowly to notice quickly, because most queries were served from memory.

   Remediation

   • Added compute nodes hoping new nodes could attach the disks, which did not work
   • Deleted and recreated the Cassandra StatefulSet with an updated pod management policy, so all pods but one started
   • Raised Kafka topic retention to avoid data loss during the long downtime
   • Temporarily added nodes so Metrictank restarts were not slowed by CPU starvation
   • Restarted all Metrictank instances, which took more than 20 hours, so they connected to the new Cassandra IPs

   Action items

   • Re-instantiate the gocql connection in Metrictank when it is detected dead, so it reconnects even when all Cassandra IPs change
   • Fix the Metrictank write-queue deadlock by updating an internal data structure with atomics instead of a lock

   Lessons

   An OrderedReady StatefulSet cannot recover past a single pod whose volume will not attach; when every pod is down, the ordering that protects normal start-up blocks the whole cluster. A client that learns peer addresses only from live peers needs a way to go back to the service name when all peers are replaced at once. A long-tolerated bug with a config workaround can surface at the worst time; this one turned out to have a simple fix. Writing incoming data to a Kafka write-ahead log first meant all data could still be ingested after recovery, and Kafka on non-SSD disks escaped the disk incident. With both Metrictank bugs fixed, the team expects a similar event to take less than 3 hours to recover from instead of 23.

   View case
3. IL-0401 Prow jobs on the k8s-prow-build GKE cluster failed and merges stalled as nodes hit IOPS throttling and kernel panics

   Kubernetes project2019

   Symptoms

   On 30 May 2019, in the run-up to the Kubernetes 1.15 code freeze, Prow test jobs in the k8s-prow-build cluster failed in surprising ways or were aborted partway through. Jobs were reported to GitHub as failed while Deck still showed them as running, because pods exited without uploading `finished.json`, the file most Prow tooling uses to tell a job's state.

   Node NotReadyNode kernel panicPods stuck in TerminatingThroughput degradation

   Trigger

   A spike in test load before the Kubernetes 1.15 code freeze pushed disk I/O on the build nodes far beyond the IOPS that GCP allows for 250 GB disks.

   Root cause

   Capacity exhaustion

   Component

   Cloud block storageNode root diskkubeletCI system

   Contributing factor

   Monitoring blind spotIgnored early signal

   Detection

   Several users reported jobs that GitHub showed as failed but Deck showed as still running, and the first report came on Slack at 13:26. Alerting for these failures did not exist or did not work.

   Remediation

   • Requested and received additional disk quota
   • Brought up 55 nodes with 500 GB disks in a new node pool
   • Migrated all nodes from the 250 GB disk pool to the 500 GB disk pool by draining old nodes, finishing at 23:55

   Action items

   • Create or fix monitoring so the oncall is paged when tide stops doing things
   • Set a process and guidelines for adding new members to the oncall rotation, with preparation and extra support

   Lessons

   Prow metrics were not recorded before the incident, which made it hard to understand, and alerting for these failures did not exist or did not work. After the cause was found and a fix devised, nothing happened for another two hours. The team counts it as luck that someone who recognised IOPS as the problem happened to be around to look.

   View case
4. IL-0040 Parallel Helm installs saturated small gp2 root volumes on a kops cluster and left all three workers NotReady with the kubelet or Docker down

   Saltside2017

   Symptoms

   While running the CI process on a local machine to test an application Helm chart, the SRE lead watched the pods with watch kubectl get pods. All pods reached Running, and then some went back to Pending. Two hours later the problem had grown and some pods showed the phase Unknown.

   Pods PendingImage pull failuresNode NotReadyService outage

   Trigger

   A CI run installed the application's Helm charts for all four markets (Efritin.com, Tonaton.com, Ikman.lk and Bikroy.com) on the nonproduction cluster at the same time.

   Root cause

   Capacity exhaustion

   Component

   Node root diskkubeletContainer runtimeHelm

   Contributing factor

   Unreviewed defaultsMonitoring blind spotIgnored early signalSingle point of failure

   Detection

   The SRE lead saw pods go from Running back to Pending while watching kubectl get pods during the CI run; no monitoring raised an alert, even when all three workers were not ready.

   Remediation

   • terminated the three worker nodes and let the auto scaling group replace them

   Action items

   • Fix the Datadog integration for the nonproduction AWS account and repeat the installs with telemetry
   • Increase the worker root EBS volumes from 20GB to 120GB
   • Keep common base images pulled on every node with a DaemonSet until kops supports user hooks
   • Configure different allocation limits for the different layers in Kubernetes
   • Discuss a highly available Tiller with the Helm team
   • Find a way to throttle the number of newly created pods

   Lessons

   An ordinary deploy of the application could collapse the cluster, because the default 20GB gp2 root volumes could not keep up with parallel image pulls and container starts. Without node metrics and pod phase metrics, three NotReady workers raised no alert. A single Tiller replica can block the deploy that would fix an outage.

   View case

By root cause5