Cases14 cases

4 to 8 of 14

1. IL-0027 All CoreDNS pods landed on one node, the node ran out of memory, and DNS for the whole service went down

   Backpackr2025

   Symptoms

   Services on the production Amazon EKS cluster behind the idus marketplace threw intermittent errors whose cause was hard to pin down. Calls to external services such as RDS and Redis failed now and then, and whenever DNS traffic spiked, domain lookups answered slowly or failed outright.

   DNS resolution failuresIntermittent connection failuresHigh latencyOOMKilledService outage

   Trigger

   All CoreDNS pods were scheduled onto the same node, and that node's memory usage spiked until it ran out of memory.

   Root cause

   Capacity exhaustion

   Component

   CoreDNSClient-side DNS resolver and cachekubeletContainer memory limitNode pool

   Contributing factor

   Unreviewed defaultsSingle point of failureNo caching

   Detection

   The write-up does not say how the full outage was noticed. The earlier DNS trouble showed up as intermittent service errors, and investigating failed calls to RDS and Redis led to DNS resolution failures.

   Remediation

   • deployed NodeLocal DNSCache as a DaemonSet in front of CoreDNS
   • added a PodDisruptionBudget (maxUnavailable 1) and topologySpreadConstraints across zones for CoreDNS
   • lowered ndots from 5 to 2 with dnsConfig in the Deployments

   Lessons

   The CoreDNS setup that EKS creates by default (two pods) can be enough for a small or development cluster but becomes a bottleneck in a large production cluster, and DNS is a single point of failure that needs high availability and room to scale. Tuning the CoreDNS cache and buffer size only relieved the symptoms; the real load came from the extra queries that ndots:5 generates for external names. A CoreDNS pod without a memory limit can share a node's fate with everything else on it.

   View case
2. IL-0020 During an EKS 1.30 upgrade the descheduler tried to reschedule every pod on the cordoned nodes at once and production workloads went down

   UK Ministry of Justice2025

   Symptoms

   At 09:36 on 18 March 2025, during the upgrade of the live cluster to EKS 1.30, users reported that their pods were being terminated and were not restarting automatically, in both production and non-production environments. Automated infrastructure alerts fired as well, and production services had outages.

   Pod evictionPods PendingService outageUpgrade stall

   Trigger

   Upgrading the live EKS cluster from 1.29 to 1.30, during which the descheduler attempted to reschedule all pods on the cordoned nodes simultaneously.

   Root cause

   Faulty deployment

   Component

   DeschedulerNode poolCluster autoscaler

   Contributing factor

   No headroomNo alert on limitUnreviewed defaults

   Detection

   Users reported at 09:36 that pods were being terminated and not restarting, and automated infrastructure alerts fired.

   Remediation

   • Removed the cordon annotation so pods could be rescheduled
   • Deleted stuck 1.30 nodes to force their recreation
   • Added a new node group of 20 nodes running 1.30 by hand
   • Cordoned and drained all old 1.29 nodes onto the new 1.30 nodes

   Action items

   • Raise an AWS Production System Down support case (Case ID: 174229643100496)
   • Get guidance from AWS support on querying control-plane logs to find the root cause of similar issues
   • Document a runbook for emergency scaling of a new node group in case of unexpected capacity shortages
   • Alert on an imbalance between the autoscaling group and the Kubernetes nodes
   • Review the descheduler configuration to understand why it throws pods off cordoned nodes, and fix it where possible
   • Alert on spikes in the pending pod count

   Lessons

   The write-up lists review actions rather than lessons. They show the team had no documented way to add an emergency node group, no alert on a mismatch between the autoscaling group and the nodes Kubernetes sees, no alert on a spike in pending pods, and no clear understanding of how the descheduler treats cordoned nodes.

   View case
3. IL-0153 DOKS worker nodes went NotReady at 06:00 UTC on three days because a systemd timer in the Debian image ran apt upgrade and killed it mid kernel upgrade, breaking node networking

   DigitalOcean2023

   Symptoms

   Customers of DigitalOcean Managed Kubernetes (DOKS) saw worker nodes go NotReady between 06:00 and 07:00 UTC and stay unavailable, taking down the services on them, until the nodes were replaced or rebooted; some nodes needed several replacements or reboots. The first sporadic reports on October 8 said replacing the node fixed it. The same thing happened again around 06:00 UTC on October 9, more widely and across many regions, and again on October 10. Only clusters on versions 1.27.6-do.0 and 1.28.2-do.0 were affected.

   Node NotReadyService outage

   Trigger

   A systemd timer in the DigitalOcean Debian image started apt upgrade daily at 06:00 UTC, with a random delay of up to 60 minutes.

   Root cause

   Configuration change

   Component

   Node operating system imageLinux kernelkubelet

   Contributing factor

   Unreviewed defaultsLimited debug accessChange with a delayed effect

   Detection

   Sporadic customer reports of failed worker nodes arrived at 07:43 UTC on October 8; internal incident response started at 07:10 UTC on October 9 after broader impact across regions.

   Remediation

   • Advised customers to replace or reboot affected worker nodes
   • Arranged SSH and console access to worker nodes while they were healthy, and live-debugged an affected node on October 10
   • Released a DaemonSet to all affected clusters that disables the apt upgrade systemd timer on every worker node
   • Released new node images without the auto-update process

   Action items

   • Disable the timer during node provisioning, then remove the DaemonSet from all clusters
   • Add a check to the internal conformance test suite for new cluster versions that the auto-upgrade process and other unwanted timers stay disabled
   • Support logging into worker nodes even when normal access paths are broken

   Lessons

   An operating system auto-update timer left enabled in a node image can change the kernel and systemd underneath Kubernetes, and a timeout that kills the upgrade half-way can leave a node without networking. Failures that start at the same time every day point to a scheduled job on the nodes, and systemd timers belong on that list next to cron jobs. When the failure takes out a node's network, an investigation that depends on logging into the node stalls; access paths that work while the node is broken shorten diagnosis.

   View case
4. IL-0198 An automatic Ubuntu security update restarted systemd-networkd, which flushed the IP rules Cilium relied on and cut more than 60 percent of Datadog's Kubernetes nodes off the network across regions and cloud providers

   Datadog2023

   Symptoms

   Between 06:00 and 07:00 UTC on 8 March 2023, Kubernetes nodes in several Datadog regions lost network connectivity at the same time, on AWS, Google Cloud and Azure. All services across multiple regions were affected, including the regions that host Datadog's CI/CD and automation tools. Datadog's regions are not connected to each other and changes are rolled out one region at a time, so a simultaneous failure on several cloud providers looked implausible at first.

   Node NotReadyService outageThroughput degradation

   Trigger

   On 7 March 2023 Ubuntu published a systemd patch for a CVE (249.11-0ubuntu3.7). Ubuntu's default unattended upgrades installed it on the nodes between 06:00 and 07:00 UTC on 8 March, and installing it restarted systemd-networkd.

   Root cause

   Breaking change in an upgrade

   Component

   systemd-networkdCiliumNode operating system image

   Contributing factor

   Unreviewed defaultsChange with a delayed effectNo staged rolloutAutomation amplification

   Remediation

   • restarted thousands of disconnected instances on Google Cloud and Azure through the cloud APIs, keeping their local disks
   • rebuilt the data lost with terminated AWS instances' local disks through replication, reprocessing and restores from backup

   Lessons

   A change in a base operating system component can stay dormant for months until something restarts that component. Here the trigger was a security patch, and the change reached every region at once because automatic OS updates ran outside the progressive, region-by-region process used for every other change. Cloud providers react differently to an instance that loses its network. Google Cloud and Azure left the instances running, so a restart recovered them with their disks; AWS replaced them quickly, which brought stateless services back fast but destroyed the local-disk data the stateful services needed.

   View case
5. IL-0109 A retried node rollover on a DFDS EKS cluster set the Auto Scaling group back to 15 instances, and the default termination policy removed every healthy worker node, leaving the cluster with no nodes

   DFDS2023sev1

   Symptoms

   At 09:33 UTC on 14 February 2023 end users told the platform team that Kubernetes logs were not arriving in CloudWatch as expected. The investigation went through fluentd and found that the nodes were running containerd as their container runtime instead of docker-shim. A scheduled node rollover the day before, at 07:30 UTC on 13 February, had set containerd as the default runtime by accident.

   Service outageResources deletedMonitoring outage

   Trigger

   A scheduled node rollover had accidentally made containerd the default container runtime, which stopped log shipping to CloudWatch; the unscheduled rollover to revert it timed out, and the pipeline run that followed reduced the Auto Scaling group from 30 to 15 instances.

   Root cause

   Configuration change

   Component

   Container runtimeNode launch templateNode poolTerraformTelemetry agent

   Contributing factor

   Automation amplificationUnreviewed defaultsUnrepresentative stagingNo configuration testsNo runbookHarmful manual action

   Detection

   End users reported the missing CloudWatch logs that started the work. The postmortem lists 2 minutes as the time to detection of the node failure.

   Remediation

   • ran the node rollover script to add new nodes, which failed on a timeout from Docker Hub
   • ran the node rollover script a second time, which added new nodes that the load balancer marked healthy at 11:01 UTC

   Action items

   • Document the rollover process, especially what can be done when it goes wrong
   • Investigate options for improving the rollover process
   • Add fluentd log collection to the QA test suite so logs are covered end to end
   • Add alarms for fluentd when too little or no log data is sent
   • Implement a staging environment
   • Implement guards against selecting an invalid container runtime

   Lessons

   When a change goes wrong, rolling back to a known working configuration is safer than rushing a fix, which can make the damage worse. Launching new worker nodes depends on the cloud-init script not failing in any way. The QA configuration differed from production, there was no staging environment, the QA tests did not cover fluentd log collection, and the rollover process had no documentation for when it fails.

   View case

By root cause8