Cases5 cases

1 to 5 of 5

1. IL-0188 Rolling updates on EKS returned 502 errors for about 30 seconds because Kubernetes deleted old pods as soon as new pods passed readiness, before the ALB had marked the new pod targets healthy

   Yonghyun Kim2025

   Symptoms

   Every rolling update of the team's microservices on Amazon EKS, behind an Application Load Balancer, was followed by intermittent 502 and 503 errors for users. A Slack message at 3 a.m. read "배포는 성공했는데, 서비스는 죽었다" (the deployment succeeded, but the service died). Every pod was Ready and Datadog was green while users saw errors.

   High error rateService outage

   Trigger

   A rolling update of a Deployment served through an ALB that registers pod IPs as targets, with no pod readiness gates.

   Root cause

   Faulty deployment

   Component

   Cloud load balancerIngress controllerPod termination

   Contributing factor

   Unverified assumptionUnreviewed defaultsMonitoring blind spot

   Detection

   A Slack message at 3 a.m. reported that the deployment had succeeded but the service was down; Datadog dashboards were green at the time.

   Remediation

   • labelled the namespace with elbv2.k8s.aws/pod-readiness-gate-inject=enabled so the AWS Load Balancer Controller injects pod readiness gates and Kubernetes waits for the ALB target to be healthy before deleting old pods

   Lessons

   A pod being Ready in Kubernetes does not mean the load balancer will send it traffic. Without a readiness gate, a rolling update can delete the old pods while the ALB still considers the new targets unhealthy, and dashboards that track pod status stay green during the errors. Making pods wait longer on shutdown reduced the errors but did not fix the start-up gap and made every deployment much slower; the readiness gate ties the pod's Ready state to the ALB's view of the target.

   View case
2. IL-0192 A Crossplane composition merge-policy change for a TLS policy update switched Kubernetes Services from LoadBalancer to ClusterIP and deleted the load balancers behind about 25% of Grafana Cloud services

   Grafana Labs2025

   Symptoms

   At 08:41 UTC on 18 February 2025, several Grafana Labs application teams noticed that some of their endpoints were no longer available. The investigation quickly found that the load balancers for those endpoints were gone.

   Service outageResources deleted

   Trigger

   A change to the merge policy of a Crossplane composition, made so that the default TLS policy of the load balancers could be overridden, was applied to development, staging and production at the same time.

   Root cause

   Configuration change

   Component

   Configuration templatingCloud load balancer

   Contributing factor

   Unverified assumptionNo staged rolloutExcessive blast radiusNo safeguard on destructive change

   Detection

   Application teams noticed at 08:41 UTC that some of their endpoints were no longer available.

   Remediation

   • rolled back the Crossplane composition change
   • recreated the affected Kubernetes Services so that Kubernetes recreated their load balancers

   Action items

   • Add a CI check that blocks a deployment to more than one wave, so any exception to the dev, staging, canary, production order is caught
   • Give higher priority to a more sophisticated wave design that was already under discussion
   • Enable deletion protection on the load balancers, one layer below Crossplane
   • Enable deletion protection on other critical cloud provider resources
   • Develop the Crossplane Managed Resources exporter for change validation and visibility, now in beta testing within Platform engineering; simulated against the change that caused this outage, it shows a clear diff
   • Complete and test support for reconfiguring the TLS policy so application teams can deploy it

   Lessons

   A change that looked small and low-risk had a side effect that only a full end-to-end test through Crossplane and the cloud provider's load balancer controller would have shown; seeing the intended override work was not that test. Staged rollout and blast-radius limits that exist only as process can be skipped, so Grafana Labs moved to enforce waves in CI and to add deletion protection on the load balancers themselves, beneath the Crossplane layer.

   View case
3. IL-0473 Jenkins infrastructure went fully down after a pod IP range fix deleted every AKS node pool and could not recreate them

   Jenkins project2023

   Symptoms

   On 7 July 2023 from 11:05 to 15:25 UTC many public Jenkins infrastructure services were completely down, including get.jenkins.io, plugins.jenkins.io, accounts.jenkins.io, javadoc.jenkins.io and incrementals.jenkins.io, while ci.jenkins.io, issues.jenkins.io, repo.jenkins-ci.org and www.jenkins.io were partly or completely disrupted.

   Network unreachableResources deletedCluster or node provisioning stallService outage

   Trigger

   After the upgrade to Kubernetes 1.25 changed the range of the pods' originating IP and LDAP access was blocked, a fix (Azure PR 431) deployed at 10:55 UTC to set a proper set of pod IP ranges removed all node pools of the cluster.

   Root cause

   Configuration change

   Component

   Node poolCNI pluginCloud load balancer

   Contributing factor

   Unverified assumptionNo staged rolloutNo safeguard on destructive change

   Detection

   After the upgrade, at 10:30 UTC, the team noticed that services inside the cluster, such as accounts.jenkins.io, could not reach the LDAP service.

   Remediation

   • Created the cluster again from scratch with a fixed network setup
   • Set a custom pod CIDR in a range separate from the virtual network
   • Moved the services and their DNS records to new public IPs
   • Pushed a pull request that recorded the manual rebuild, including the IP setup, in code

   Action items

   • Protect the public IPs from deletion with a Management Lock
   • Keep the public IPs in a separate resource group and point the Kubernetes-managed load balancers to it with the service.beta.kubernetes.io/azure-load-balancer-resource-group annotation
   • Improve network diagrams and documentation so possible overlaps are visible when preparing operations
   • Avoid changing the configuration of all AKS node pools at once

   Lessons

   The team said that changing one node pool at a time would have shown the problem after the first pool and avoided a full outage, and that the public IPs should change as little as possible because users behind corporate firewalls with allow-lists depend on them. The team also noted that it could rebuild, in under 4 hours, the cluster that hosts almost all public services.

   View case
4. IL-0177 WebSocket connections to LINE's messaging-hub on Kubernetes dropped all at once whenever another service's change reloaded a shared HAProxy L7 load balancer, and the reconnect wave overloaded a token API and filled nf_conntrack on Nginx

   LINE Plus2022

   Symptoms

   The graph of WebSocket connections to messaging-hub, the messaging platform used by the Japanese food delivery service Demaecan, showed sudden deep drops even outside peak traffic. The drops kept coming back at irregular intervals. Messages still reached clients, because messaging-hub switches to Firebase Cloud Messaging when a WebSocket is gone.

   Connection resetsDatabase overloadIntermittent connection failuresHigh latency

   Trigger

   Another service that shared the same L7 load balancer deployed its own load balancer configuration in the Verda dashboard, which reloaded HAProxy; 30 minutes later, at the hard-stop-after limit, the old HAProxy process exited and closed every WebSocket connection it still held.

   Root cause

   Configuration change

   Component

   HAProxyCloud load balancerconntrack tableIngress controller

   Contributing factor

   Change with a delayed effectExcessive blast radiusRetry stormUnverified assumption

   Detection

   The developer noticed deep, sudden drops in the WebSocket connection graph that were not tied to peak traffic and kept recurring irregularly. The Nginx packet drops were found through network monitoring.

   Remediation

   • separated the Merchant system's token issuance API into its own deployment so reconnect traffic did not delay other Merchant APIs
   • scaled out Nginx with pod anti-affinity and a label selector so each pod ran on a different node, which stopped the nf_conntrack packet drops
   • raised Ingress Nginx proxy-read-timeout and proxy-send-timeout and the load balancer timeout to 3600s, which did not stop the drops
   • moved messaging-hub from the shared L7 load balancer to an L4 load balancer, which ended the WebSocket drops

   Lessons

   A reload of a shared load balancer by a different team can cut long-lived connections, and with hard-stop-after the cut comes 30 minutes later, far from the change that caused it. The author's lesson is not to narrow the scope of the search too early: trusting that the infrastructure was fine kept the investigation inside the team's own systems for days. A reconnect wave from many WebSocket clients can overload the systems that issue connection tokens and fill nf_conntrack on proxy nodes. Scaling Nginx out only helps for conntrack if the pods land on different nodes, and anti-affinity leaves extra replicas Pending once they outnumber the nodes. That messaging-hub problems can still load the connected systems remains an open problem.

   View case
5. IL-0105 Replacing the AWS VPC CNI during a Terraform refactoring detached the ALB target groups, and every service in the Kubernetes cluster returned 503

   DFDS2021

   Symptoms

   At 08:29 UTC on 22 June 2021 alerts fired because all services in the Kubernetes cluster were returning 503. No inbound traffic was reaching the cluster. A customer reported the problem at 08:32.

   Service outageHigh error rate

   Trigger

   The pipeline replaced the AWS VPC CNI as part of a refactoring that moved EKS add-ons from kubectl to native Terraform management.

   Root cause

   Configuration change

   Component

   AWS VPC CNICloud load balancerTerraform

   Contributing factor

   Unverified assumptionNo configuration tests

   Detection

   Alerts fired at 08:29 UTC, eight minutes after the VPC CNI was replaced; a customer reported the issue at 08:32.

   Remediation

   • committed a fix that reverted the infrastructure-modules reference
   • re-triggered the pipeline after it failed on an AWS API timeout
   • let the pipeline reattach the target groups to the ALB

   Action items

   • Revert the ALB de-registration delay to the default of 300 seconds
   • Update the roll-over script to set the ALB de-registration delay to zero temporarily before a roll-over
   • Create an ingress test suite

   Lessons

   The change to the de-registration delay had been weighed mainly for performance. Critical pipeline runs should be watched while they run. Everyone should receive the alerts and react to them, and alert messages that were unclear should be reworded.

   View case

By root cause2