Incident Library
Applied filters Root causeSoftware defectComponentCloud load balancerDomainKubernetesClear allEvery case under the filters, with no sentence; newest first.
Suggested filters Search, and the values found in your words appear here.

Graph

  • Root cause
  • Component
  • Symptom
  • Contributing factor
  • Case

Cases3 cases

1 to 3 of 3

  1. Symptoms

    At 11:48 PM PDT on 19 October 2025, every system that reached DynamoDB in us-east-1 through the public regional endpoint started getting DNS failures and could not connect. This included customer traffic and internal AWS services that depend on DynamoDB. DynamoDB global table replicas in other regions still answered but fell behind in replication to and from us-east-1.

    Trigger

    One DNS Enactor, slowed by unusually high retry delays, applied a much older DNS plan to the regional DynamoDB endpoint just as another Enactor that had applied the newest plan ran its clean-up, which deleted that older plan and with it every IP address of the endpoint.

    Root cause
    Component
    Contributing factor
    Detection

    DNS failures to DynamoDB began immediately at 11:48 PM PDT and the engineering teams of affected AWS services were engaged at once; by 12:38 AM they had identified DynamoDB's DNS state as the source. The later NLB health check problem was detected by monitoring at 6:52 AM.

    Remediation
    • applied temporary mitigations by 1:15 AM that let some internal services reach DynamoDB and repaired key internal tooling
    • restored all DynamoDB DNS information by 2:25 AM through manual operator intervention
    • throttled incoming work and selectively restarted DWFM hosts from 4:14 AM so droplet leases could be re-established
    • reduced the load on Network Manager to bring network configuration propagation times back to normal by 10:36 AM
    • disabled automatic health check failover for NLB at 9:36 AM, and re-enabled it at 2:09 PM after EC2 recovered
    • relaxed the EC2 request throttles from 11:23 AM until all EC2 APIs and launches were normal at 1:50 PM
    Action items
    • Disable the DynamoDB DNS Planner and DNS Enactor automation worldwide
    • Fix the race condition and add protections against applying incorrect DNS plans before re-enabling the DNS automation
    • Add a velocity control to NLB that limits how much capacity a single load balancer can remove when health check failures cause availability zone failover
    • Build an additional EC2 test suite that exercises the DWFM recovery workflow at scale
    • Improve throttling in EC2 data propagation systems so incoming work is rate limited by the size of the waiting queue
    Lessons

    A single DNS record that automation can empty is enough to take a widely used regional endpoint off the network, and every service built on it fails in turn. A check made once at the start of a long operation can be stale by the time the operation writes its result. Recovery of the dependency is not recovery of the dependents: systems that lost state during the outage, such as EC2's droplet leases and network propagation backlog, can collapse under their own catch-up work, and container services that rely on new instance launches keep failing to launch and scale until that work is done.

  2. Symptoms

    At 08:00 UTC on 2021-09-06 every service in DFDS's Kubernetes cluster answered with 404. Investigation started five minutes later.

    Trigger

    The automated Kubernetes node rollover on 2021-09-06 restarted all the Traefik v2 pods, five days after a malformed IngressRoute manifest had been applied.

    Root cause
    Component
    Contributing factor
    Detection

    All services returned 404 from 08:00 UTC and root cause investigation started at 08:05. Time to detection was 5 minutes.

    Remediation
    • changed the ALB health check path, which made the targets healthy but did not stop the 404s
    • rolled back by hand to Traefik v1 as the main ingress controller
    • deleted the malformed IngressRoute by hand and confirmed the Traefik v2 bug
    • applied the changes upstream
    Action items
    • Upgrade Traefik to v2.5, where the bug is fixed, and verify that it removes the bug
    • Change the Traefik v2 health check path to something more robust
    • Set up an external liveness probe on the ingress controller
    • Consider workload segmentation to limit the blast zone
    • Look into monitoring the Traefik v2 API for rapid changes
    • Look into smoke testing during and after node rollover
    Lessons

    A malformed IngressRoute did nothing visible for five days and then took down all ingress when every Traefik v2 pod had restarted during a node rollover. Because Traefik v2 failed gracefully, the first signals pointed at the ALB health checks instead of at Traefik. On incident handling, the team concluded that appointing an incident manager could have helped, that the war room meeting should be recorded and a log book kept, that people not involved should only make suggestions in writing, and that a short first round of sharing thoughts and gut feelings is useful.

  3. Symptoms

    Fewer than 20% of the nodes in one Zalando cluster were available. Most nodes reported NotReady at the same moment, and only a handful stayed Ready.

    Root cause
    Component
    Contributing factor
    Remediation
    • none; the nodes recovered on their own after about 15 minutes
Check your cluster for this

These 3 cases involve Cloud load balancer and Database. kubegap audits a Kubernetes cluster for gaps like these, read-only, from Claude Code or Codex; its checks cite public reports like the ones in this library.

By root cause1