Cases4 cases

1 to 4 of 4

1. IL-0203 A routine Kubernetes cluster system update made the AWS Load Balancer Controller fail, so new pods were never registered with the ALB and Honeycomb's EU1 ingest and UI went down once the last old pods were replaced

   Honeycomb2024

   Symptoms

   Event ingestion and the Honeycomb UI in EU1 became unavailable at 22:00:10 UTC on April 9, 2024, and the status page reported that the EU1 instance was down. Both the ingestion service and the service behind the web UI stopped at roughly the same moment.

   Service outageStale endpoint routing

   Trigger

   A routine system update to the Kubernetes cluster, rolled out earlier on April 9, followed by a regular deployment that replaced pods one at a time.

   Root cause

   Breaking change in an upgrade

   Component

   Ingress controllerCloud load balancer

   Contributing factor

   Monitoring blind spotUnrepresentative stagingChange with a delayed effect

   Detection

   The first status post, saying the EU1 instance was down, went up at 15:08 PDT (22:08 UTC), about 8 minutes after the outage began. There was no alerting on the AWS Load Balancer Controller.

   Remediation

   • Restarted the AWS Load Balancer Controller
   • Rolled back the Kubernetes cluster system update

   Action items

   • Find the exact cause of the failure so the system update can be deployed safely
   • Add monitoring and alerting on the AWS Load Balancer Controller so on-call engineers learn of a failure quickly and can pause deployments

   Lessons

   A rolling deployment can look healthy while the component that wires new pods into the load balancer is broken; the failure only shows when the last old pod goes away. Honeycomb now treats the AWS Load Balancer Controller as a critical component that needs its own alerting, so deployments can be paused before they remove the last pods that still receive traffic. Extensive testing in development and staging did not reveal the bad interaction.

   View case
2. IL-0530 Virtual router controllers in us-central1 ran out of memory in a loop, cutting networking for new and migrated VMs

   Google Cloud2023

   Symptoms

   On 5 October 2023 in us-central1, newly created VMs waited a long time before their networking worked, and VMs that had been live migrated lost connectivity for a long time after the migration. Networking telemetry showed cross-region packet loss to and from us-central1 from 03:08 US/Pacific. Health check state of VMs reached load balancers late.

   Packet lossNetwork unreachableOOMKilledStale endpoint routingCluster or node provisioning stall

   Trigger

   A management plane behaviour change, meant to decouple the processing of API updates to Instance Groups and Network Endpoint Groups used as load balancer backends, was deployed in us-central1 after rolling out to several other regions without incident.

   Root cause

   Faulty deployment

   Component

   Network control plane (SDN)Cloud load balancer

   Contributing factor

   Excessive blast radiusNo alert on limit

   Detection

   Engineers were alerted to slowness in the virtual network control plane in us-central1 at 21:45 US/Pacific on 4 October, before the packet loss started, and to controller failures from memory exhaustion at 02:11 on 5 October. Networking telemetry showed cross-region packet loss from 03:08.

   Remediation

   • Increased the memory allocated to the virtual network router controllers
   • Rolled back the management plane change in us-central1
   • Restarted by hand the routers that were still not accepting updates

   Action items

   • Alert proactively on memory risks and unexpected memory increases
   • Refactor the deployment configuration so engineers can reallocate memory much faster
   • Re-evaluate existing practices and add safety mechanisms for API reconciliation
   • Make management plane changes more visible across teams so the changes can be correlated faster
   • Adjust the deployment footprint so a regional API change is less likely to exhaust memory across the region at once
   • Optimise memory use in the traffic routers and their controllers

   View case
3. IL-0178 On EKS, HPA scale-in returned 502 errors because containers stopped before their pod IPs left the Service endpoints, and after blue/green switches conntrack kept sending established connections to deleted pods behind an instance-mode ALB

   Lotte E-commerce2022

   Symptoms

   LOTTE ON, Lotte E-commerce's online shopping mall of about 40 microservices on Amazon EKS, returned errors for a period of time whenever the Horizontal Pod Autoscaler (HPA) scaled pods in after load dropped. Requests reached containers that had already been deleted and failed with 502 errors.

   High error rateIntermittent timeoutsStale endpoint routing

   Trigger

   HPA scale-in deleting pods, and the deletion of Blue pods after a blue/green switch of the Service label selector.

   Root cause

   DNS or network fault

   Component

   Horizontal pod autoscalerPod terminationkube-proxyconntrack tableCloud load balancerIngress controller

   Contributing factor

   Unreviewed defaults

   Remediation

   • delayed container shutdown on pod deletion (a wait in the SIGTERM handler or a preStop sleep, capped by terminationGracePeriodSeconds) so containers stop only after the pod has left the Service endpoints
   • switched some workloads' Ingress-created ALBs from instance mode to IP mode so traffic goes straight to pod IPs without iptables and conntrack

   Action items

   • Move all workloads to ALB IP mode gradually

   Lessons

   Removing a pod from Service endpoints and stopping its containers happen at the same time in Kubernetes, so a pod can stop while traffic is still routed to it unless shutdown is delayed with a preStop hook or in the application. With an instance-mode ALB, traffic passes through node iptables and conntrack, and established connections can keep going to a pod IP after its iptables rules are gone. IP mode avoids that path, within the limit of 1000 targets per target group.

   View case
4. IL-0089 A test cluster deletion script run with the kube context pointing at the live-1 production cluster deleted its ingress controller, monitoring, logging, cert-manager, kiam and external-dns

   UK Ministry of Justice2020

   Symptoms

   At 18:27 on 21 September 2020 the Cloud Platform team detected that some services running on the live-1 production cluster had gone down, and some users could not reach them. The incident was declared at 18:40.

   Service outageResources deletedMonitoring outageStale endpoint routing

   Trigger

   A script for deleting a test cluster was triggered while the kube context was pointing at the live-1 production cluster instead of the test cluster.

   Root cause

   Operator error

   Component

   Ingress controllerCredential broker for podsexternal-dnsCloud load balancerPrometheus

   Contributing factor

   No safeguard on destructive change

   Detection

   The first detection was at 18:27, and the incident was declared 13 minutes later, at 18:40.

   Remediation

   • restored the default ingress controller together with external-dns and kiam, which it depends on
   • corrected the owner field in the Formbuilder Route 53 TXT records so external-dns pointed their A records at the new NLB
   • restored the remaining components with a targeted apply
   • ran the apply pipeline to restore all certificates, ServiceMonitors and Prometheus rules from the environment repository

   View case

By root cause4