Cases2 cases

1 to 2 of 2

1. IL-0179 With DEBUG logging and synchronous log output, a high-traffic service filled the 64 KB stdout pipe, so request threads blocked in write() while holding database connections and HikariCP ran dry, failing requests in 30-second bursts

   MUSINSA2026

   Symptoms

   The on-call engineer for a high-traffic service was alerted that requests were failing in large batches every 30 seconds.

   High error rateIntermittent timeoutsConnection pool exhaustion

   Trigger

   DEBUG level logging was on in production when traffic surged, raising log volume to about 100 times normal while the service logged synchronously.

   Root cause

   Configuration change

   Component

   Application logging libraryContainer runtimeTelemetry agentApplication database

   Contributing factor

   Unverified assumptionExcessive blast radius

   Detection

   The on-call engineer was alerted that requests were failing in large batches every 30 seconds.

   Action items

   • Replace synchronous logging with TraceAwareAsyncAppender, which captures trace_id and span_id on the calling thread and drops logs instead of blocking when the queue is full (neverBlock=true)
   • Keep the amount of log output at a sustainable level, since an asynchronous queue still fills under sustained overload

   Lessons

   Removing AsyncAppender to keep trace IDs also removed the protection that kept request threads away from stdout back-pressure. A company-wide standard applies the same side effect to dozens of services, so check what a standard rests on and what working behaviour it takes away. ThreadLocal context does not cross into an asynchronous worker, but capturing it on the calling thread before handing the event off keeps both the IDs and the asynchronous output. Under extreme load, dropping log lines is preferable to stopping request handling.

   View case
2. IL-0109 A retried node rollover on a DFDS EKS cluster set the Auto Scaling group back to 15 instances, and the default termination policy removed every healthy worker node, leaving the cluster with no nodes

   DFDS2023sev1

   Symptoms

   At 09:33 UTC on 14 February 2023 end users told the platform team that Kubernetes logs were not arriving in CloudWatch as expected. The investigation went through fluentd and found that the nodes were running containerd as their container runtime instead of docker-shim. A scheduled node rollover the day before, at 07:30 UTC on 13 February, had set containerd as the default runtime by accident.

   Service outageResources deletedMonitoring outage

   Trigger

   A scheduled node rollover had accidentally made containerd the default container runtime, which stopped log shipping to CloudWatch; the unscheduled rollover to revert it timed out, and the pipeline run that followed reduced the Auto Scaling group from 30 to 15 instances.

   Root cause

   Configuration change

   Component

   Container runtimeNode launch templateNode poolTerraformTelemetry agent

   Contributing factor

   Automation amplificationUnreviewed defaultsUnrepresentative stagingNo configuration testsNo runbookHarmful manual action

   Detection

   End users reported the missing CloudWatch logs that started the work. The postmortem lists 2 minutes as the time to detection of the node failure.

   Remediation

   • ran the node rollover script to add new nodes, which failed on a timeout from Docker Hub
   • ran the node rollover script a second time, which added new nodes that the load balancer marked healthy at 11:01 UTC

   Action items

   • Document the rollover process, especially what can be done when it goes wrong
   • Investigate options for improving the rollover process
   • Add fluentd log collection to the QA test suite so logs are covered end to end
   • Add alarms for fluentd when too little or no log data is sent
   • Implement a staging environment
   • Implement guards against selecting an invalid container runtime

   Lessons

   When a change goes wrong, rolling back to a known working configuration is safer than rushing a fix, which can make the damage worse. Launching new worker nodes depends on the cloud-init script not failing in any way. The QA configuration differed from production, there was no staging environment, the QA tests did not cover fluentd log collection, and the rollover process had no documentation for when it fails.

   View case

By root cause1