Cases2 cases

1 to 2 of 2

1. IL-0115 One of OpenAI's three production AKS clusters went offline through a human error, and rebuilding it took 10½ hours because an AKS Kubernetes upgrade broke the ingress and AKS cannot be downgraded

   OpenAI2022

   Symptoms

   At 18:56 PDT on 23 June 2022 (01:56 UTC on 24 June) several models went offline at once: some fine-tuned curie and davinci models, the Codex beta models code-davinci-001 and code-cushman-001, the legacy GPT models curie, babbage and ada, and all Embeddings models.

   Service outageHigh error rateIntermittent timeouts

   Trigger

   A destructive operation on one of the three production clusters, caused by human error that the existing safeguards did not catch, took the whole cluster offline.

   Root cause

   Operator error

   Component

   Ingress controllerModel hub

   Contributing factor

   No safeguard on destructive changeNo headroomDeferred upgradesOverlapping failures

   Remediation

   • re-allocated the models from the lost cluster to the remaining two clusters
   • rebuilt the VPN link with Azure support after losing the connection to AKS during cluster setup
   • built workarounds with Azure support after losing the connection to Azure Private Link
   • tore down the cluster and rebuilt it from scratch after the upgraded Kubernetes version broke the ingress
   • moved traffic back into the rebuilt cluster between 05:30 and 06:30 PDT

   Action items

   • Add checks and locks so that this and similar production-critical infrastructure cannot be modified by accident
   • Add better visibility into the operations being performed and make parts of the system more lexicographically distinct
   • Keep working with Azure on the AKS network connectivity issues so they do not disrupt new cluster operations
   • Update playbooks with the new cluster failure modes and change the setup steps for new clusters and infrastructure
   • Upgrade Kubernetes systematically and set aside time so the clusters do not fall behind again
   • Shard fine-tuned models across multiple clusters and work towards more automatic cross-cluster replication
   • Distribute and replicate Azure Blob Storage so fine-tuned models load faster and more reliably
   • Finish rolling out node-to-node caching to relieve Azure Blob Storage bottlenecks
   • Change how model weights are stored so they are more efficient and faster to load

   Lessons

   Losing one of three clusters exhausted the GPU headroom, and GPUs could not be added on short notice, so full recovery depended on bringing the same cluster back. Rebuilding it exposed a deferred Kubernetes upgrade: the newer version broke the ingress, and because AKS cannot downgrade there was no way back except a full rebuild. Recovering many large models at once is limited by the bandwidth of the storage they load from, and the caches that normally hide this do not help when everything moves to a different cluster.

   View case
2. IL-0014 A GKE upgrade to a withdrawn version stalled on slow drains and a stuck node pool, then broke an ingress and confused the HPA

   loveholidays2019

   Symptoms

   On the evening of a long-overdue upgrade of a loveholidays production GKE cluster from 1.10.X to 1.12.5-gke.10, planned to take 2 to 2.5 hours, the master upgrade and the first two 7-node NodePools went smoothly. After that the NodePool upgrades slowed to a crawl. Each node is cordoned, drained and upgraded in turn. Even a 14-node cluster at about 5 minutes per node took over an hour, and with about 100 more nodes to go, some of them taking over 15 minutes to drain, the sequential drains were too slow to finish at a reasonable hour.

   Upgrade stallPods PendingScale-up failureService outageAutoscaler misbehaviour

   Trigger

   A manual upgrade of the GKE masters and NodePools from 1.10.X to 1.12.5-gke.10, two versions at once, on 19 March 2019; GKE's release notes of 14 March had already said that version was no longer available for new clusters or master upgrades because masters showed elevated error rates, but it could still be selected.

   Root cause

   Cloud provider outage

   Component

   GKE control planeNode poolCluster autoscalerIngress controllerHorizontal pod autoscaler

   Contributing factor

   Unrepresentative stagingOverlapping failuresIgnored early signal

   Detection

   The slow drains, zombie nodes and stuck NodePool were seen by the engineer running the upgrade; the broken Ingress was noticed after the upgrade and explained by Google support; the HPA problem was noticed the next day.

   Remediation

   • drained the remaining NodePool nodes ahead of the upgrade with kubectl drain --ignore-daemonsets --delete-local-data
   • deleted the zombie instances from the managed instance group with gcloud compute instance-groups managed delete-instances
   • cancelled the stuck UPGRADE_NODES operation with gcloud beta container operations cancel
   • used kubectl port-forward in place of the broken internal Ingresses
   • scaled down the older of two active ReplicaSets, or triggered a dummy deployment, to bring the HPA back

   Action items

   • Alert when a HorizontalPodAutoscaler is at 70% and at 100% of its capacity
   • Alert when a deployment has had two active ReplicaSets for 30 minutes and for 60 minutes
   • Re-evaluate termination grace periods that were set to arbitrary large values
   • Read the GKE release notes before every cluster upgrade
   • Use auto-upgrade in non-production environments, and manual cluster upgrades with automatic node upgrades in production
   • Keep environments as identical as possible, including resource names

   Lessons

   Read the release notes before upgrading: the target version had been withdrawn five days earlier. Drain time depends on pod configuration, so emptyDir volumes, long grace periods and missing disruption budgets turn a NodePool upgrade into hours. Pre-production only catches problems like the ingress bug if it matches production down to resource names. Auto-upgrades in non-production surface problems early, and a mix of manual cluster upgrades and automatic node upgrades in production keeps clusters current without much effort.

   View case

By root cause2