Cases3 cases

1 to 3 of 3

1. IL-0005 A new telemetry service overloaded the Kubernetes API servers of large clusters and broke DNS-based service discovery for all OpenAI services

   OpenAI2024

   Symptoms

   Alerts fired at 3:13 PM PST on 11 December 2024, and from 3:16 PM every OpenAI service was significantly degraded or completely unavailable, including ChatGPT, the API and Sora. The status page reported API calls returning errors and difficulties logging in to platform.openai.com and ChatGPT. Customer impact peaked at 3:40 PM.

   Service outageHigh error rateControl plane unresponsiveDNS resolution failures

   Trigger

   At 2:23 PM PST a change introducing a new telemetry service, which collects detailed Kubernetes control plane metrics, was merged and the deployment pipeline started. Between 2:51 PM and 3:20 PM the change was applied to all clusters.

   Root cause

   Configuration change

   Component

   Kubernetes API serverClient-side DNS resolver and cacheTelemetry agent

   Contributing factor

   Unrepresentative stagingNo staged rolloutCache-masked failureMonitoring blind spotLimited debug access

   Detection

   OpenAI's detection tools worked: alerts fired at 3:13 PM PST, a few minutes before customer impact began at 3:16 PM, and the root cause was identified at 3:16 PM.

   Remediation

   • Scaled clusters down to reduce the total Kubernetes API load
   • Blocked network access to the Kubernetes admin APIs so no new expensive requests arrived
   • Scaled up the Kubernetes API servers
   • Removed the telemetry service once enough control was back
   • Moved traffic from impacted clusters to healthy ones
   • Intervened manually in clusters where simultaneous resource downloads saturated resource limits

   Action items

   • Put every infrastructure configuration change through a phased rollout with continuous monitoring of both the service workloads and the clusters, including the Kubernetes control plane
   • Run fault injection tests in which the data plane runs without the control plane for longer, and tests that roll out bad changes on purpose to check detection and rollback
   • Build break-glass mechanisms so engineers can reach the Kubernetes API servers in any circumstances
   • Decouple the Kubernetes data plane from the control plane so that service discovery for critical workloads does not depend on the control plane
   • Speed up recovery with better caching and dynamic rate limiters for resources needed at cluster startup, and regular drills that rapidly replace an entire cluster

   Lessons

   Several systems and processes failed at once and interacted in unexpected ways: tests did not catch the change's effect on the Kubernetes control plane, DNS caching put a delay between the change and the failures, and being locked out of the control plane made remediation very slow. Because service discovery used Kubernetes DNS, the control plane was carrying load for product traffic even though the data plane was meant to be independent of it.

   View case
2. IL-0060 Kubernetes 1.24 upgrade removed the master node label that Calico route reflectors selected on, dropping all pod routes and taking Reddit down for 314 minutes

   Reddit2023

   Symptoms

   About two minutes after an engineer started the Kubernetes 1.23 to 1.24 upgrade of the cluster running Reddit's legacy stack, just after 19:00 UTC, the site stopped. The CDN edge request graph, which is kept separate from the cluster, showed traffic by status collapsing. Users saw the error page, a homepage with no posts, or plain errors.

   Service outageHigh error rateDNS resolution failuresMonitoring outagePods stuck in ContainerCreatingControl plane lag

   Trigger

   An in-place upgrade of the legacy cluster from Kubernetes 1.23 to 1.24; in 1.24 the node-role.kubernetes.io/master label is removed even from running clusters.

   Root cause

   Breaking change in an upgrade

   Component

   CalicoKubernetes API serverAdmission webhooketcd

   Contributing factor

   Configuration not in codeUnrepresentative stagingUntested backupMonitoring blind spotSingle point of failure

   Detection

   The site broke about two minutes into the upgrade; an incident was opened immediately and responders were on the call within three minutes, working from CDN edge graphs because the cluster's own metrics were gone.

   Remediation

   • deleted the Open Policy Agent webhook configurations to stop API server timeouts
   • terminated all worker nodes of the cluster
   • restored the control plane from the pre-upgrade backup onto the first control plane node
   • switched off the cluster autoscaler until the control plane was stable
   • generated new TLS certificates so replacement control plane nodes could join etcd
   • brought traffic back in steps from 1% to 100%
   • restarted legacy services that had been stopped by hand

   Action items

   • Codify cluster configuration so every choice has a record, and document in detail what cannot be codified
   • Standardise components across clusters and replace bespoke configurations
   • Build tooling to manage the lifecycle of whole clusters so they can be recreated or replicated
   • Add pre-production clusters that can be tested with confidence
   • Improve the backup restore process and make cluster upgrades safe

   Lessons

   Configuration that exists only in a live cluster, edited by hand through a special tool, can be forgotten, as the route reflector setup was, and then break on an upgrade nobody connects it to. A Kubernetes upgrade cannot be reverted without a restore, so the restore procedure has to be kept current and practised. Consistent, codified clusters are what make upgrades testable; bespoke clusters keep producing outages.

   View case
3. IL-0075 Kubernetes API servers pegged on CPU when the cluster grew to about 290 nodes, traced to Datadog agents polling the API

   Civis Analytics2019

   Symptoms

   After Civis released its new script infrastructure on Kubernetes internally in September 2018, developers reported that kubectl commands were slow, and users intermittently could not start notebooks and services.

   Control plane lagControl plane unresponsiveHigh latencyHigh error rateDNS resolution failures

   Trigger

   Migrating clients' Python, R and container scripts from the in-house Bocce system to Kubernetes (the project called Croquet) pushed the cluster to about 290 EC2 instances under a large script load.

   Root cause

   Capacity exhaustion

   Component

   Kubernetes API serverTelemetry agentetcd

   Contributing factor

   Unknown limitUnverified assumptionMonitoring blind spotNo capacity planning

   Detection

   Developer reports of slow kubectl commands and user reports of notebooks and services failing to start, then high CPU on the master nodes.

   Remediation

   • moved internal users back to the old Bocce infrastructure
   • resized the three master nodes from m4.large to m4.4xlarge
   • changed the Datadog setup so per-node agents no longer polled the API server for service metadata
   • raised max-requests-inflight for non-mutating requests from 400 to 1200
   • grew the etcd EBS volumes from 20 to 100 GB (100 to 300 IOPS)
   • switched client scripts from the ClusterFirst DNS policy to Default

   Action items

   • Upgrade etcd from 2.2.1 to 3.x once Kops supports a safe migration
   • Solve the in-cluster DNS timeouts so client scripts can talk to other workloads in the cluster

   Lessons

   Kubernetes can reach thousands of nodes only after tuning, and third-party DaemonSets are a common cause of control plane load: an agent on every node that polls or watches the API server multiplies with the cluster size. Datadog, kube2iam and the fluentd metadata filter all showed this. A small configuration change often fixes it, but finding it took load testing and the API server access logs.

   View case

By root cause3