Incident Library
Applied filters ComponentkubeletSymptomControl plane unresponsiveFactorUnreviewed defaultsClear allEvery case under the filters, with no sentence; newest first.
Suggested filters Search, and the values found in your words appear here.

Graph

  • Root cause
  • Component
  • Symptom
  • Contributing factor
  • Case

Cases2 cases

1 to 2 of 2

  1. Symptoms

    The cluster could not be reached from outside. On the control plane node, sudo systemctl status kubelet showed TLS handshake errors such as "http: TLS handshake error from 101.198.0.183:19517: tls: client requested unsupported application protocols" and "http: TLS handshake error from 101.198.0.172:36328: tls: client offered only unsupported versions: [302 301]".

    Trigger

    The leaf certificates that kubeadm had generated for the cluster, valid for one year by default, expired at 2026-02-20 16:16 UTC.

    Root cause
    Component
    Contributing factor
    Detection

    The author could not connect to the cluster from outside and went to the control plane node to read the kubelet logs.

    Remediation
    • renewed all expired certificates with sudo kubeadm certs renew all
    • restarted containerd and the kubelet so the static control plane pods restarted with the new certificates
    • copied the renewed /etc/kubernetes/admin.conf to $HOME/.kube/config
    Lessons

    A kubeadm cluster stops working one year after its leaf certificates were issued unless they are renewed. The first errors seen may be TLS handshake failures or a flag error that does not mention certificates; the decisive message is the x509 expiry in the kube-apiserver log for its connection to etcd. The author recommends checking expiry with kubeadm certs check-expiration and renewing from 30 days before. kubeadm upgrade apply renews the certificates too, so a cluster upgraded at least once a year avoids the problem; a cluster run for a long time without upgrades can renew from cron, for example with 0 3 1 1 * root kubeadm certs renew all && systemctl restart kubelet in /etc/cron.d/kubeadm-cert-renew.

  2. Symptoms

    The daily NRE Labs statistics showed lesson activity collapsing, and kubectl could not reach the cluster: `The connection to the server 1.2.3.4:6443 was refused - did you specify the right host or port?`

    Trigger

    Unknown. The liveness probe that kubeadm writes into the etcd static pod manifest (an `etcdctl get foo` against 127.0.0.1:2379, failureThreshold 8, timeoutSeconds 15) started failing. The author first suspected GCP maintenance the night before, but could not reproduce the probe failure by hand and does not know why it began.

    Root cause
    Component
    Contributing factor
    Detection

    The author saw lesson activity drop in the daily NRE Labs statistics during his morning routine.

    Remediation
    • removed the liveness probe section from the kubeadm-generated etcd static pod manifest and applied it between etcd restarts
    Action items
    • Add monitoring, especially for the single-node master
    • Run a basic "down for maintenance" page in Google Cloud Functions that points to Twitter for updates, to redirect to during outages
    Lessons

    Because all of the infrastructure is managed as code, the cluster could be rebuilt quickly, but destroying it before finding the cause also destroyed the evidence. Monitoring matters, especially with a single-node master. Read the restart counts in kubectl output, not just the Running status. Remember the fundamentals instead of expecting the issue to be more complicated than it is, and do not let the urgency of an outage push you into hasty decisions. Put up a maintenance page instead of leaving the site failing halfway.

Check your cluster for this

These 2 cases involve etcd and Kubernetes API server. kubegap audits a Kubernetes cluster for gaps like these, read-only, from Claude Code or Codex; its checks cite public reports like the ones in this library.

By root cause2