Cases4 cases

1 to 4 of 4

1. IL-0027 All CoreDNS pods landed on one node, the node ran out of memory, and DNS for the whole service went down

   Backpackr2025

   Symptoms

   Services on the production Amazon EKS cluster behind the idus marketplace threw intermittent errors whose cause was hard to pin down. Calls to external services such as RDS and Redis failed now and then, and whenever DNS traffic spiked, domain lookups answered slowly or failed outright.

   DNS resolution failuresIntermittent connection failuresHigh latencyOOMKilledService outage

   Trigger

   All CoreDNS pods were scheduled onto the same node, and that node's memory usage spiked until it ran out of memory.

   Root cause

   Capacity exhaustion

   Component

   CoreDNSClient-side DNS resolver and cachekubeletContainer memory limitNode pool

   Contributing factor

   Unreviewed defaultsSingle point of failureNo caching

   Detection

   The write-up does not say how the full outage was noticed. The earlier DNS trouble showed up as intermittent service errors, and investigating failed calls to RDS and Redis led to DNS resolution failures.

   Remediation

   • deployed NodeLocal DNSCache as a DaemonSet in front of CoreDNS
   • added a PodDisruptionBudget (maxUnavailable 1) and topologySpreadConstraints across zones for CoreDNS
   • lowered ndots from 5 to 2 with dnsConfig in the Deployments

   Lessons

   The CoreDNS setup that EKS creates by default (two pods) can be enough for a small or development cluster but becomes a bottleneck in a large production cluster, and DNS is a single point of failure that needs high availability and room to scale. Tuning the CoreDNS cache and buffer size only relieved the symptoms; the real load came from the extra queries that ndots:5 generates for external names. A CoreDNS pod without a memory limit can share a node's fate with everything else on it.

   View case
2. IL-0169 The Scaleway Kubernetes API in FR-PAR ran out of memory under simultaneous deployments, and because it also handled node authentication, Kapsule and Kosmos nodes went NotReady

   Scaleway2024

   Symptoms

   At 23:48 CET on 24 January 2024 the Scaleway Kubernetes API for the FR-PAR region ran out of memory. At the same minute Scaleway saw requests to its API Gateway spike.

   Node NotReadyOOMKilledIntermittent timeoutsMonitoring outage

   Trigger

   Simultaneous deployments in the FR-PAR region pushed the Scaleway Kubernetes API out of memory.

   Root cause

   Capacity exhaustion

   Component

   Container memory limitkubelet

   Contributing factor

   Single point of failureRetry storm

   Detection

   Increased load on the API Gateway was detected at 23:48, the minute the incident began, and the incident was escalated to on-call engineers at 00:00:10.

   Remediation

   • raised the memory limit and garbage collection thresholds of the Kubernetes managed services
   • deployed additional replicas of key services
   • purged the registry cache and monitored the clusters as they stabilised
   • adjusted service configurations after the incident to keep the platform stable

   Action items

   • Implement a local authentication cache
   • Further develop node authentication
   • Enhance monitoring, adjust rate limiting strategies and improve incident response protocols

   Lessons

   Because the Kubernetes API also handled node authentication, its memory exhaustion made some nodes NotReady, and the endless retries of those nodes added load on the API Gateway. Scaleway plans a local authentication cache and further work on node authentication.

   View case
3. IL-0176 Prometheus in a 235-node Kubernetes cluster crash-looped because over two million series exhausted host memory and the kernel OOM killer chose it first, as Burstable QoS gave it oom_score_adj 999

   LINE2020

   Symptoms

   One Monday morning the author opened the Prometheus dashboard to check a Kubernetes cluster for alerts and could not reach it. The Prometheus pod was in CrashLoopBackOff: kubectl get pods showed it 1/2 ready with 950 restarts over 3d20h on worker3.

   Container crash loopOOMKilledMonitoring outageProbe failures

   Trigger

   After start, the Prometheus time series count rose to 2,162,256 within five minutes and its memory use filled the 8GB host.

   Root cause

   Capacity exhaustion

   Component

   PrometheuskubeletLinux kernel

   Contributing factor

   No resource requests or limitsNo capacity planning

   Detection

   The author found it on a Monday morning when the Prometheus dashboard, opened to check the cluster for alerts, could not be reached.

   Remediation

   • removed most of the unnecessary settings from the Prometheus ConfigMap, after which the container stopped crashing

   Action items

   • Set appropriate resource requests and limits on the Prometheus pod
   • Reduce unneeded metrics by adjusting scrape targets or scrape interval
   • Estimate Prometheus memory needs, provide dedicated hosts with a node label such as deploy-topology: Prometheus, and pin the Prometheus pod to them with a nodeSelector

   Lessons

   Exit code 137 together with an OOM event in the kubelet log means the kernel killed the container, not kubelet. Under node memory pressure the kernel kills the process with the highest score, and kubelet derives each container's oom_score_adj from the pod's QoS class: a container without a memory request in a pod where another container has one ends up Burstable with a score near 1000, so it is killed first. In a large cluster, Prometheus memory needs to be estimated from the expected series count and requested explicitly.

   View case
4. IL-0035 Worker nodes went NotReady after a new ElastAlert rule without memory limits used up node memory

   NU.nl2019

   Symptoms

   The NU.nl development team got reports that several services on one of its Kubernetes clusters behaved erratically: occasional error pages, slow responses and timeouts. The affected services were mostly internal tools and dashboards.

   Node NotReadyHigh error rateHigh latencyIntermittent timeoutsMonitoring outageOOMKilled

   Trigger

   A new ElastAlert rule, deployed shortly before from the command line, that fired if the Cloudfront-* Elasticsearch indexes stopped receiving documents; those indexes take a few million requests per hour, and the rule made ElastAlert's memory grow without bound.

   Root cause

   Configuration change

   Component

   Container memory limitkubeletPrometheus

   Contributing factor

   No resource requests or limitsUnreviewed defaultsNo alert on limitMonitoring blind spotExcessive blast radius

   Detection

   Users reported error pages, slow responses and timeouts from several services; no alert fired.

   Remediation

   • terminated the NotReady nodes one by one so the auto-scaling group replaced them (the new nodes also went NotReady, but Prometheus and Grafana landed on a stable node)
   • found the ElastAlert pods' memory growth on the Grafana pod memory dashboard
   • fixed the ElastAlert problem that caused the memory growth

   Action items

   • Define alerts on resource usage such as CPU, memory and disk space
   • Keep researching an alerting strategy that combines Elasticsearch, Prometheus Alertmanager and New Relic
   • Consider exporting metrics out of the cluster and running Grafana outside it, on EC2 or a separate Kubernetes cluster
   • Either visualise the important metrics in the ELK stack or make Prometheus and Grafana more available, and improve the metrics strategy
   • Set resource limits for ElastAlert through the Helm values
   • Configure namespaces with default memory requests and limits
   • Isolate customer-facing workloads from build, logging and monitoring workloads (a dedicated node group, or later a separate tools cluster)
   • Deploy everything through automation such as Jenkins pipelines, and consider a GitOps approach
   • Deploy through a pipeline that includes a smoke test step
   • Make Kubernetes and cloud infrastructure work part of the team's sprints, picked up by all team members while pairing with more experienced members, and hold workshops that go deep into specific topics

   Lessons

   Fixing the root cause covers only a small part of what an incident can teach; the chain of smaller failures around it is where most of the learning is. A pod without a memory limit can take whole nodes down, so limits need defaults at the namespace level. Monitoring that runs inside the cluster it watches goes blind with it. Changes installed by hand from the command line leave the rest of the team without a record of what changed.

   View case

By root cause2