Cases2 cases

1 to 2 of 2

1. IL-0185 A disk failure made the first control plane node of a Kubespray cluster read-only, and recovery needed the Kubespray inventory reordered and a new control plane node joined

   Hans H. Kim2023

   Symptoms

   The kernel on a master node of the Kubernetes cluster logged disk I/O errors: "[HAWKEYE] kernel:: [22329228.540857] blk_update_request: I/O error, dev sda, sector 795030104 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0". The sda disk switched to read-only, and the machine needed a new disk and an operating system reinstall.

   Node NotReady

   Trigger

   A hardware failure of the disk on the first control plane node.

   Root cause

   Hardware failure

   Component

   KubesprayetcdNode root diskConfigMaps and Secrets

   Contributing factor

   Single point of failure

   Detection

   Disk I/O errors from blk_update_request on dev sda appeared in the node's kernel log.

   Remediation

   • reordered the kube_control_plane group in the Kubespray inventory so that node-2 became the first control plane node
   • removed the failed machine from the cluster
   • edited the cluster-info ConfigMap in kube-public to point at a live control plane node and updated certificate-authority-data
   • installed and configured kubelet and the other components on a new node and joined it as a control plane node with kubeadm, skipping the etcd join phase
   • added the etcd member separately

   Lessons

   In a Kubespray cluster the first node of the kube_control_plane inventory group is special, so its failure needs its own procedure: move another node into the first position, fix the cluster-info ConfigMap, join a new control plane node and add the etcd member back. etcd should be brought back to full membership before another control plane node fails.

   View case
2. IL-0040 Parallel Helm installs saturated small gp2 root volumes on a kops cluster and left all three workers NotReady with the kubelet or Docker down

   Saltside2017

   Symptoms

   While running the CI process on a local machine to test an application Helm chart, the SRE lead watched the pods with watch kubectl get pods. All pods reached Running, and then some went back to Pending. Two hours later the problem had grown and some pods showed the phase Unknown.

   Pods PendingImage pull failuresNode NotReadyService outage

   Trigger

   A CI run installed the application's Helm charts for all four markets (Efritin.com, Tonaton.com, Ikman.lk and Bikroy.com) on the nonproduction cluster at the same time.

   Root cause

   Capacity exhaustion

   Component

   Node root diskkubeletContainer runtimeHelm

   Contributing factor

   Unreviewed defaultsMonitoring blind spotIgnored early signalSingle point of failure

   Detection

   The SRE lead saw pods go from Running back to Pending while watching kubectl get pods during the CI run; no monitoring raised an alert, even when all three workers were not ready.

   Remediation

   • terminated the three worker nodes and let the auto scaling group replace them

   Action items

   • Fix the Datadog integration for the nonproduction AWS account and repeat the installs with telemetry
   • Increase the worker root EBS volumes from 20GB to 120GB
   • Keep common base images pulled on every node with a DaemonSet until kops supports user hooks
   • Configure different allocation limits for the different layers in Kubernetes
   • Discuss a highly available Tiller with the Helm team
   • Find a way to throttle the number of newly created pods

   Lessons

   An ordinary deploy of the application could collapse the cluster, because the default 20GB gp2 root volumes could not keep up with parallel image pulls and container starts. Without node metrics and pod phase metrics, three NotReady workers raised no alert. A single Tiller replica can block the deploy that would fix an outage.

   View case

By root cause2