Cases6 cases

1 to 5 of 6

1. IL-0499 Discord voice and video calls hung at Awaiting Endpoint for three hours after 17% of sessions stopped at once

   Discord2026

   Symptoms

   From 12:13 to 15:30 PDT on 25 March 2026, voice and video on Discord were heavily degraded. Users mostly could not start or join calls and saw "Awaiting Endpoint" in their call status.

   Service outage

   Trigger

   A routine change to tune the sessions service cluster on Kubernetes gave each pod more CPU and memory and lowered the pod count in proportion. When it was deployed to the first zone at 12:13 PDT, Kubernetes terminated 50% of that zone's pods, and the termination grace period ran out before the sessions could be handed off.

   Root cause

   Configuration change

   Component

   Pod terminationCoordination and key-value storeDatabase proxy and connection pooler

   Contributing factor

   Retry stormUnknown limit

   Remediation

   • Set low syncer spawn rate limits in the calls, streams and guilds services and restarted the voice syncers cluster
   • Restarted voice syncers instances one at a time, and four of the first five recovered fully
   • Brought 15 new voice syncers instances online, doubling capacity and halving the syncers per instance
   • Restarted the last backed-up voice syncers instance, leaving the doubled cluster fully healthy

   Action items

   • Add a validating admission webhook that rejects a scale-down of Elixir workloads until each pod has handed off its processes
   • Replace the Holster.Pool supervisor with a PartitionSupervisor so outgoing connections are created and checked out concurrently
   • Move gun connection process lifecycle management into Holster.Pool so the gun connection supervisor is no longer used
   • Tune the upstream rate limits that call into voice syncers, with load shedding tooling that can force them
   • Add rate limits on endpoint selection in voice syncers to limit outbound connection creation
   • Monitor the HTTP connection pooling mailboxes
   • Review and expand instrumentation and logging for service discovery announcement and voice syncer RPCs to SFUs
   • Monitor the most critical processes across all services instead of aggregate metrics such as overall mailbox health
   • Bring more workloads into Kubernetes so capacity can be scaled with a single command instead of provisioning VMs by hand
   • Re-architect the A/V system to scale its control plane services horizontally across multiple regions

   Lessons

   Discord says a large enough traffic spike will find a bottleneck somewhere; in earlier large-load incidents its ScyllaDB databases limited recovery, and this time the bottleneck moved to the voice services. Facing a capacity constraint, the team asks whether to increase supply, such as adding services, or reduce demand, such as rate limiting inbound traffic. During an incident it matters to know the toolbox, and Elixir and the BEAM give engineers many introspection options. Any slowdown in the hot loop of a single-threaded process can degrade both the service and the user experience.

   View case
2. IL-0188 Rolling updates on EKS returned 502 errors for about 30 seconds because Kubernetes deleted old pods as soon as new pods passed readiness, before the ALB had marked the new pod targets healthy

   Yonghyun Kim2025

   Symptoms

   Every rolling update of the team's microservices on Amazon EKS, behind an Application Load Balancer, was followed by intermittent 502 and 503 errors for users. A Slack message at 3 a.m. read "배포는 성공했는데, 서비스는 죽었다" (the deployment succeeded, but the service died). Every pod was Ready and Datadog was green while users saw errors.

   High error rateService outage

   Trigger

   A rolling update of a Deployment served through an ALB that registers pod IPs as targets, with no pod readiness gates.

   Root cause

   Faulty deployment

   Component

   Cloud load balancerIngress controllerPod termination

   Contributing factor

   Unverified assumptionUnreviewed defaultsMonitoring blind spot

   Detection

   A Slack message at 3 a.m. reported that the deployment had succeeded but the service was down; Datadog dashboards were green at the time.

   Remediation

   • labelled the namespace with elbv2.k8s.aws/pod-readiness-gate-inject=enabled so the AWS Load Balancer Controller injects pod readiness gates and Kubernetes waits for the ALB target to be healthy before deleting old pods

   Lessons

   A pod being Ready in Kubernetes does not mean the load balancer will send it traffic. Without a readiness gate, a rolling update can delete the old pods while the ALB still considers the new targets unhealthy, and dashboards that track pod status stay green during the errors. Making pods wait longer on shutdown reduced the errors but did not fix the start-up gap and made every deployment much slower; the readiness gate ties the pod's Ready state to the ALB's view of the target.

   View case
3. IL-0433 Shifting API traffic from EC2 to EKS on Fargate overloaded two CoreDNS pods and caused mass name-resolution errors

   MonotaRO2023

   Symptoms

   When MonotaRO raised the share of requests for the remaining endpoints of its backend API sent to EKS from 1% to 25%, Sentry filled with errors saying the API could not reach the database and outside services. The errors were about DNS name resolution, and the traffic had to be shifted back to the EC2 version.

   DNS resolution failuresHigh error rate

   Trigger

   MonotaRO raised the share of requests for the remaining API endpoints routed by the ALB to the EKS version from 1% to 25%.

   Root cause

   Capacity exhaustion

   Component

   CoreDNSClient-side DNS resolver and cacheContainer CPU limitHorizontal pod autoscalerPod termination

   Contributing factor

   Unreviewed defaultsNo resource requests or limitsUnrepresentative stagingUnverified assumption

   Detection

   Sentry showed a large number of errors about connecting to the database and outside services right after the traffic share was raised.

   Remediation

   • Shifted the requests back to the EC2 version to stop the errors
   • Added an HPA to autoscale the CoreDNS pods as a stopgap, which let the migration to EKS finish

   Action items

   • Set ndots to 1 through dnsConfig in the application Deployments
   • Set cache 600 in the Corefile in the coredns ConfigMap to lengthen the CoreDNS cache TTL
   • Add lameduck 30s to the CoreDNS health plugin so CoreDNS keeps serving while it is scaled in
   • Consider reducing the differences between production and staging, weighed against cost

   Lessons

   MonotaRO assumed that a managed service would not cause problems and so skipped researching other companies' migrations, load testing and monitoring. Staging differed from production in its network layout, so ndots differed between them, and staging databases could not take a high-load test. Looking at the CoreDNS logs and resolv.conf instead of guessing found that ndots:5 made lookups of outside names try every search domain first.

   View case
4. IL-0178 On EKS, HPA scale-in returned 502 errors because containers stopped before their pod IPs left the Service endpoints, and after blue/green switches conntrack kept sending established connections to deleted pods behind an instance-mode ALB

   Lotte E-commerce2022

   Symptoms

   LOTTE ON, Lotte E-commerce's online shopping mall of about 40 microservices on Amazon EKS, returned errors for a period of time whenever the Horizontal Pod Autoscaler (HPA) scaled pods in after load dropped. Requests reached containers that had already been deleted and failed with 502 errors.

   High error rateIntermittent timeoutsStale endpoint routing

   Trigger

   HPA scale-in deleting pods, and the deletion of Blue pods after a blue/green switch of the Service label selector.

   Root cause

   DNS or network fault

   Component

   Horizontal pod autoscalerPod terminationkube-proxyconntrack tableCloud load balancerIngress controller

   Contributing factor

   Unreviewed defaults

   Remediation

   • delayed container shutdown on pod deletion (a wait in the SIGTERM handler or a preStop sleep, capped by terminationGracePeriodSeconds) so containers stop only after the pod has left the Service endpoints
   • switched some workloads' Ingress-created ALBs from instance mode to IP mode so traffic goes straight to pod IPs without iptables and conntrack

   Action items

   • Move all workloads to ALB IP mode gradually

   Lessons

   Removing a pod from Service endpoints and stopping its containers happen at the same time in Kubernetes, so a pod can stop while traffic is still routed to it unless shutdown is delayed with a preStop hook or in the application. With an instance-mode ALB, traffic passes through node iptables and conntrack, and established connections can keep going to a pod IP after its iptables rules are gone. IP mode avoids that path, within the limit of 1000 targets per target group.

   View case
5. IL-0139 Pods on GKE clusters with Calico network policy got stuck Terminating or Pending after upgrading to 1.22 or later because of a race condition in the Calico component

   Google Cloud2022

   Symptoms

   After upgrading to GKE 1.22 or later, clusters that use Calico network policy could have pods stuck in Terminating or Pending. Google Cloud posted the incident at 16:01 US/Pacific on 2022-09-15 as pods stuck terminating; from the 2022-09-21 update the description also named pods stuck Pending.

   Pods stuck in TerminatingPods Pending

   Trigger

   Upgrading a GKE cluster that uses Calico network policy to version 1.22 or later.

   Root cause

   Software defect

   Component

   CalicokubeletPod termination

   Contributing factor

   –

   Remediation

   • released a fix in GKE 1.24.4-gke.800 and made it available in 1.23 and 1.22
   • offered an internal patch through Google Cloud Support for affected customers
   • advised customers to restart the kubelet and calico-node to get stuck pods unstuck
   • advised customers without a strong need for Calico to disable Calico network policy

   Action items

   • Upgrade clusters on the Rapid, Regular and Stable release channels running 1.22 or 1.23 to the fixed version automatically

   Lessons

   A race in the Calico component can leave pods stuck Terminating, with FailedKillPod and KillPodSandbox errors that point at the network plugin, not at the workload. Restarting the kubelet and calico-node frees the stuck pods but does not remove the race; the fixed GKE version or Google's internal patch does. Clusters that use the cluster autoscaler are more likely to hit it.

   View case

By root cause5