Cases21 cases

1 to 5 of 21

1. IL-0063 VPN outage after recreating a Redis StatefulSet restarted the whole Redis cluster without readiness checks

   AdGuard VPN2025

   Symptoms

   The day began with an alert that several instances of the Redis cluster were running out of disk space. That part was fixed quickly. The outage came an hour later: right after the Redis StatefulSet was deleted and recreated at 8:10 UTC, Kubernetes restarted every Redis pod within about five minutes, and problems started to appear.

   Service outageOOMKilledProbe failuresHigh latency

   Trigger

   To make Git match the volumes that had been resized by hand, the Redis StatefulSet was deleted with orphan (non-cascading) deletion and recreated with the new storage template; Kubernetes reconciled the new spec by restarting the entire Redis cluster.

   Root cause

   Configuration change

   Component

   Persistent volumes and stateful setsIn-memory cacheContainer memory limit

   Contributing factor

   No health probesUnverified assumptionSingle point of failureRetry stormNo headroom

   Detection

   An alert about Redis instances running out of disk space started the work; the outage itself showed up as backend errors about Redis connections right after the StatefulSet was recreated.

   Remediation

   • made the Redis masters forget obsolete node identities, reset the affected replicas and rejoined them, then waited for replication to catch up
   • identified the component that was actually running out of memory, scaled the backend service and raised memory limits for that component
   • temporarily relaxed probes so backend instances took traffic immediately instead of flapping between ready and not ready
   • reverted the temporary workarounds at 10:00 UTC

   Action items

   • Add startup probes so a Redis pod is not marked ready until its dataset is loaded
   • Build an own control plane for Redis that handles restarted pods stuck to an old master address
   • Reduce dependence on the single Redis cluster: move some important data to other stores, such as a separate Redis cluster per server, and use Kafka for some backend components

   Lessons

   The disk resize was not the problem; the cleanup afterwards was. An immutable field pushes operators toward deleting and recreating the controller, and that can set off a full reconcile. Startup and readiness probes are what slow a rolling restart down to a safe pace; without them a distributed store restarts in the most fragile way. Recovery plans must expect a cluster to heal slowly, and dependent services need to degrade gracefully while it does.

   View case
2. IL-0188 Rolling updates on EKS returned 502 errors for about 30 seconds because Kubernetes deleted old pods as soon as new pods passed readiness, before the ALB had marked the new pod targets healthy

   Yonghyun Kim2025

   Symptoms

   Every rolling update of the team's microservices on Amazon EKS, behind an Application Load Balancer, was followed by intermittent 502 and 503 errors for users. A Slack message at 3 a.m. read "배포는 성공했는데, 서비스는 죽었다" (the deployment succeeded, but the service died). Every pod was Ready and Datadog was green while users saw errors.

   High error rateService outage

   Trigger

   A rolling update of a Deployment served through an ALB that registers pod IPs as targets, with no pod readiness gates.

   Root cause

   Faulty deployment

   Component

   Cloud load balancerIngress controllerPod termination

   Contributing factor

   Unverified assumptionUnreviewed defaultsMonitoring blind spot

   Detection

   A Slack message at 3 a.m. reported that the deployment had succeeded but the service was down; Datadog dashboards were green at the time.

   Remediation

   • labelled the namespace with elbv2.k8s.aws/pod-readiness-gate-inject=enabled so the AWS Load Balancer Controller injects pod readiness gates and Kubernetes waits for the ALB target to be healthy before deleting old pods

   Lessons

   A pod being Ready in Kubernetes does not mean the load balancer will send it traffic. Without a readiness gate, a rolling update can delete the old pods while the ALB still considers the new targets unhealthy, and dashboards that track pod status stay green during the errors. Making pods wait longer on shutdown reduced the errors but did not fix the start-up gap and made every deployment much slower; the readiness gate ties the pod's Ready state to the ALB's view of the target.

   View case
3. IL-0192 A Crossplane composition merge-policy change for a TLS policy update switched Kubernetes Services from LoadBalancer to ClusterIP and deleted the load balancers behind about 25% of Grafana Cloud services

   Grafana Labs2025

   Symptoms

   At 08:41 UTC on 18 February 2025, several Grafana Labs application teams noticed that some of their endpoints were no longer available. The investigation quickly found that the load balancers for those endpoints were gone.

   Service outageResources deleted

   Trigger

   A change to the merge policy of a Crossplane composition, made so that the default TLS policy of the load balancers could be overridden, was applied to development, staging and production at the same time.

   Root cause

   Configuration change

   Component

   Configuration templatingCloud load balancer

   Contributing factor

   Unverified assumptionNo staged rolloutExcessive blast radiusNo safeguard on destructive change

   Detection

   Application teams noticed at 08:41 UTC that some of their endpoints were no longer available.

   Remediation

   • rolled back the Crossplane composition change
   • recreated the affected Kubernetes Services so that Kubernetes recreated their load balancers

   Action items

   • Add a CI check that blocks a deployment to more than one wave, so any exception to the dev, staging, canary, production order is caught
   • Give higher priority to a more sophisticated wave design that was already under discussion
   • Enable deletion protection on the load balancers, one layer below Crossplane
   • Enable deletion protection on other critical cloud provider resources
   • Develop the Crossplane Managed Resources exporter for change validation and visibility, now in beta testing within Platform engineering; simulated against the change that caused this outage, it shows a clear diff
   • Complete and test support for reconfiguring the TLS policy so application teams can deploy it

   Lessons

   A change that looked small and low-risk had a side effect that only a full end-to-end test through Crossplane and the cloud provider's load balancer controller would have shown; seeing the intended override work was not that test. Staged rollout and blast-radius limits that exist only as process can be skipped, so Grafana Labs moved to enforce waves in CI and to add deletion protection on the load balancers themselves, beneath the Crossplane layer.

   View case
4. IL-0473 Jenkins infrastructure went fully down after a pod IP range fix deleted every AKS node pool and could not recreate them

   Jenkins project2023

   Symptoms

   On 7 July 2023 from 11:05 to 15:25 UTC many public Jenkins infrastructure services were completely down, including get.jenkins.io, plugins.jenkins.io, accounts.jenkins.io, javadoc.jenkins.io and incrementals.jenkins.io, while ci.jenkins.io, issues.jenkins.io, repo.jenkins-ci.org and www.jenkins.io were partly or completely disrupted.

   Network unreachableResources deletedCluster or node provisioning stallService outage

   Trigger

   After the upgrade to Kubernetes 1.25 changed the range of the pods' originating IP and LDAP access was blocked, a fix (Azure PR 431) deployed at 10:55 UTC to set a proper set of pod IP ranges removed all node pools of the cluster.

   Root cause

   Configuration change

   Component

   Node poolCNI pluginCloud load balancer

   Contributing factor

   Unverified assumptionNo staged rolloutNo safeguard on destructive change

   Detection

   After the upgrade, at 10:30 UTC, the team noticed that services inside the cluster, such as accounts.jenkins.io, could not reach the LDAP service.

   Remediation

   • Created the cluster again from scratch with a fixed network setup
   • Set a custom pod CIDR in a range separate from the virtual network
   • Moved the services and their DNS records to new public IPs
   • Pushed a pull request that recorded the manual rebuild, including the IP setup, in code

   Action items

   • Protect the public IPs from deletion with a Management Lock
   • Keep the public IPs in a separate resource group and point the Kubernetes-managed load balancers to it with the service.beta.kubernetes.io/azure-load-balancer-resource-group annotation
   • Improve network diagrams and documentation so possible overlaps are visible when preparing operations
   • Avoid changing the configuration of all AKS node pools at once

   Lessons

   The team said that changing one node pool at a time would have shown the problem after the first pool and avoided a full outage, and that the public IPs should change as little as possible because users behind corporate firewalls with allow-lists depend on them. The team also noted that it could rebuild, in under 4 hours, the cluster that hosts almost all public services.

   View case
5. IL-0087 After a cold reboot of RKE2 nodes, pods could not get IP addresses because Multus could not reach the Kubernetes API, and further reboots spread the failure to every node

   Fyra Labs2023

   Symptoms

   At around 2 AM ICT on 2023-04-09 the team saw unusual CPU use on one cluster node, which throttled every other service on it and made them fail. They presumed an upstream container runtime bug in containerd and runc and decided to fully reboot the affected nodes, taking the cluster down for maintenance on the assumption that it was not in active use.

   Sustained high node CPUService outage

   Trigger

   A full cold reboot of the nodes that showed unusual CPU use, followed by upgrades and cold reboots of the other nodes.

   Root cause

   unknown

   Component

   Multus meta-CNICalicoContainer runtime

   Contributing factor

   Harmful manual actionUnverified assumption

   Detection

   The team saw unusual CPU use on a node around 2 AM ICT and failing services on the rebooted nodes around 2:30 ICT; developers reported the Terra repositories down at 6:31 ICT.

   Remediation

   • uninstalled Multus and Calico and replaced them with the Cilium CNI
   • rolled back most cluster settings except the CNI

   Lessons

   Rebooting nodes to clear one problem can expose another; here a CNI chain could not reach the API server after a cold start. Repeating the same reboot on more nodes while the first failure was not understood spread the outage from a few nodes to the whole cluster. The team also found that Cilium's real resource use in their cluster was acceptable, contrary to the benchmark they had relied on.

   View case

By root cause9