Cases10 cases

1 to 5 of 10

1. IL-0435 Error rates rose as Aurora MySQL killed connections and declined queries to avoid OOM while load metrics stayed flat

   CyberAgent2026

   Symptoms

   An alert fired one day because an application's error rate had suddenly risen. The error log of the Aurora MySQL RDS instance for that time showed Aurora killing connections and declining queries to avoid running out of memory. The killed queries also made application latency worse.

   High error rateMemory pressure

   Trigger

   An application release added a batch job run every minute by a Kubernetes CronJob. Each run's short-lived pod connected to the database from a new pod IP.

   Root cause

   Capacity exhaustion

   Component

   DatabaseJobs and CronJobs

   Contributing factor

   Unreviewed defaultsChange with a delayed effect

   Detection

   An alert fired on the application's error rate.

   Remediation

   • Set performance_schema to manual management and capped two related Performance Schema parameters, unlimited by default, at 100 in the parameter group, then restarted the RDS instance

   Lessons

   When system alerts fire but the database's load metrics look calm, Performance Schema growth is worth suspecting. The two parameters that were capped are unlimited by default, so connections from ever-changing source addresses keep adding to the records. Capping them has a cost: once the cap is exceeded, per-host figures in Performance Insights are missing. Putting RDS Proxy between the application and Aurora MySQL to keep source hosts stable is another possible measure.

   View case
2. IL-0188 Rolling updates on EKS returned 502 errors for about 30 seconds because Kubernetes deleted old pods as soon as new pods passed readiness, before the ALB had marked the new pod targets healthy

   Yonghyun Kim2025

   Symptoms

   Every rolling update of the team's microservices on Amazon EKS, behind an Application Load Balancer, was followed by intermittent 502 and 503 errors for users. A Slack message at 3 a.m. read "배포는 성공했는데, 서비스는 죽었다" (the deployment succeeded, but the service died). Every pod was Ready and Datadog was green while users saw errors.

   High error rateService outage

   Trigger

   A rolling update of a Deployment served through an ALB that registers pod IPs as targets, with no pod readiness gates.

   Root cause

   Faulty deployment

   Component

   Cloud load balancerIngress controllerPod termination

   Contributing factor

   Unverified assumptionUnreviewed defaultsMonitoring blind spot

   Detection

   A Slack message at 3 a.m. reported that the deployment had succeeded but the service was down; Datadog dashboards were green at the time.

   Remediation

   • labelled the namespace with elbv2.k8s.aws/pod-readiness-gate-inject=enabled so the AWS Load Balancer Controller injects pod readiness gates and Kubernetes waits for the ALB target to be healthy before deleting old pods

   Lessons

   A pod being Ready in Kubernetes does not mean the load balancer will send it traffic. Without a readiness gate, a rolling update can delete the old pods while the ALB still considers the new targets unhealthy, and dashboards that track pod status stay green during the errors. Making pods wait longer on shutdown reduced the errors but did not fix the start-up gap and made every deployment much slower; the readiness gate ties the pod's Ready state to the ALB's view of the target.

   View case
3. IL-0204 An etcd memory spike overloaded the control plane of a Render Frankfurt cluster, and DNS then failed because CoreDNS ran on the rebooted control plane nodes and could not start without the API server

   Render2024

   Symptoms

   In January 2022 an etcd memory spike overloaded the Kubernetes control plane of one of Render's clusters in Frankfurt. At first only operations that need the control plane failed: new deploys and cron job runs.

   Control plane unresponsiveDeploys failingDNS resolution failuresHigh error rate

   Trigger

   A memory spike in etcd overloaded the cluster's control plane.

   Root cause

   Capacity exhaustion

   Component

   etcdCoreDNSKubernetes API server

   Contributing factor

   Unreviewed defaultsHarmful manual action

   Action items

   • Run CoreDNS on data plane nodes instead of control plane nodes
   • Run etcd on dedicated nodes

   Lessons

   CoreDNS can keep answering from its in-memory cache while the API server is down, but it cannot initialise without it. With CoreDNS on the control plane nodes, a reboot or restart during a control plane outage turned a failure of deploys and cron jobs into a failure of requests to services that were already running. The core problem was that the data plane was not isolated enough from the control plane: even without the reboot, the etcd memory spike alone could have forced CoreDNS to restart.

   View case
4. IL-0433 Shifting API traffic from EC2 to EKS on Fargate overloaded two CoreDNS pods and caused mass name-resolution errors

   MonotaRO2023

   Symptoms

   When MonotaRO raised the share of requests for the remaining endpoints of its backend API sent to EKS from 1% to 25%, Sentry filled with errors saying the API could not reach the database and outside services. The errors were about DNS name resolution, and the traffic had to be shifted back to the EC2 version.

   DNS resolution failuresHigh error rate

   Trigger

   MonotaRO raised the share of requests for the remaining API endpoints routed by the ALB to the EKS version from 1% to 25%.

   Root cause

   Capacity exhaustion

   Component

   CoreDNSClient-side DNS resolver and cacheContainer CPU limitHorizontal pod autoscalerPod termination

   Contributing factor

   Unreviewed defaultsNo resource requests or limitsUnrepresentative stagingUnverified assumption

   Detection

   Sentry showed a large number of errors about connecting to the database and outside services right after the traffic share was raised.

   Remediation

   • Shifted the requests back to the EC2 version to stop the errors
   • Added an HPA to autoscale the CoreDNS pods as a stopgap, which let the migration to EKS finish

   Action items

   • Set ndots to 1 through dnsConfig in the application Deployments
   • Set cache 600 in the Corefile in the coredns ConfigMap to lengthen the CoreDNS cache TTL
   • Add lameduck 30s to the CoreDNS health plugin so CoreDNS keeps serving while it is scaled in
   • Consider reducing the differences between production and staging, weighed against cost

   Lessons

   MonotaRO assumed that a managed service would not cause problems and so skipped researching other companies' migrations, load testing and monitoring. Staging differed from production in its network layout, so ndots differed between them, and staging databases could not take a high-load test. Looking at the CoreDNS logs and resolv.conf instead of guessing found that ndots:5 made lookups of outside names try every search domain first.

   View case
5. IL-0083 Intermittent 5xx errors in a multi-tenant Kubernetes cluster came from internal DNS: the node-local dnsmasq hit its 150 concurrent query limit, did not cache cluster.local answers, and ndots search lookups flooded CoreDNS

   Adevinta2023

   Symptoms

   On a Friday afternoon a tenant of SCHIP, Adevinta's multi-tenant Kubernetes runtime, reported a spike of HTTP 5xx errors in some of its services. The drops in quality of service came back periodically through the following days, each one short, and were reported mostly around midnight.

   High error rateDNS resolution failuresHigh latency

   Root cause

   DNS or network fault

   Component

   CoreDNSClient-side DNS resolver and cacheTelemetry agent

   Contributing factor

   Unreviewed defaultsUnknown limitIgnored early signalUnverified assumption

   Detection

   A tenant reported a spike of HTTP 5xx errors in some of its services; the DNS Latency SLI had already been degraded for some time without being acted on.

   Remediation

   • raised the dnsmasq concurrent query limit from 150 to 1500
   • added a CoreDNS header block that sets the ra and aa flags and clears rd, so dnsmasq caches cluster.local answers
   • configured dnsmasq on each node to answer NXDOMAIN for unresolvable search-domain names instead of forwarding them to CoreDNS
   • changed the fluent-bit log router hostname to a fully qualified name
   • asked the affected tenants to use fully qualified names for internal calls

   Lessons

   The DNS Latency SLI had shown the problem long before anyone looked at it. An SLO only protects you when its SLIs are trusted and a drop is investigated. The investigation took a month partly because several on-call groups worked on it separately, without one place for observations and hypotheses, and sometimes chased hypotheses already discarded. Disprove one hypothesis before starting the next, and collect data the metrics system lacks: DNStop showed the garbage lookups that no dashboard did. With ndots:5, short service names multiply DNS traffic; a node-local cache only helps if it can cache the cluster DNS answers at all.

   View case

By root cause5