Cases3 cases

1 to 3 of 3

1. IL-0155 Some DOKS clusters in NYC1 saw intermittent DNS timeouts and NodeNotReady events because CoreDNS ran on shared-CPU Droplet worker nodes

   DigitalOcean2026

   Symptoms

   From 20:31 UTC on July 9, 2026, DigitalOcean reported a problem with Kubernetes deployments in its NYC1 region. Application workloads could see intermittent DNS failures and NodeNotReady events.

   DNS resolution failuresIntermittent timeoutsNode NotReady

   Root cause

   Capacity exhaustion

   Component

   CoreDNSNode pool

   Contributing factor

   Unknown limit

   Lessons

   Cluster DNS is sensitive to latency, and CoreDNS on shared-CPU nodes can time out intermittently. DigitalOcean's advice is to place CoreDNS on dedicated-CPU node pools and to run enough CoreDNS replicas.

   View case
2. IL-0085 A control plane node of Magic Pages' Kubernetes cluster on Hetzner Cloud ran out of memory, the cluster's own calls then used up the Hetzner API rate limit, and all customer websites were down for about 7.5 hours

   Magic Pages2025

   Symptoms

   At around 09:33 UTC one of the three control plane nodes of the Kubernetes cluster that hosts Magic Pages went offline. Looking at the node showed that it had run out of memory.

   Service outageNode NotReadyCloud API rate limit exhausted

   Trigger

   One of the three control plane nodes ran out of memory and went offline at about 09:33 UTC; the attempts to replace it with hetzner-k3s failed while the cluster's own components were exhausting the Hetzner API rate limit.

   Root cause

   Capacity exhaustion

   Component

   Cloud controller managerPersistent volumes and stateful sets

   Contributing factor

   Unknown limitRetry stormMonitoring blind spotLimited debug accessSingle point of failureNo runbook

   Detection

   The founder found the control plane node offline at about 09:33 UTC. Monitoring alerts about unreachable customer websites started around the time the replacement attempts failed, and about half an hour of investigation identified the exhausted Hetzner API rate limit.

   Remediation

   • powered off all servers of the Kubernetes cluster to stop the API requests so the Hetzner rate limit could recover
   • waited until ratelimit-remaining had built up a buffer before starting recovery
   • restarted the control plane servers
   • started the essential Longhorn components by hand so Longhorn could heal and make storage volumes available
   • restarted the remaining websites by hand

   Action items

   • Monitor the Hetzner API call rate coming from the Kubernetes cluster nodes themselves to get early warning of high usage
   • Get a higher Hetzner API rate limit; Hetzner support was contacted
   • Investigate how to reduce the cluster's reliance on a single API, including alternatives to hetzner-k3s
   • Document and test a procedure for recovering Longhorn after a full cluster shutdown

   Lessons

   The running cluster, not only the deployment tooling, consumed the cloud provider's API quota, and in a failure it consumed it fast enough that the quota never recovered. The default limit of 3600 requests per hour was not enough for failure and recovery scenarios, and API usage from inside the cluster was not monitored. A tool that hides the provider's API errors slows diagnosis. After a full, non-graceful shutdown, Longhorn needed manual intervention to come back, which lengthened the outage.

   View case
3. IL-0591 Gitpod workspaces in all regions became IO bound and unresponsive for days after the ws39 workspace cluster release

   Gitpod2022

   Symptoms

   From April 11, 2022 at 13:17 UTC customers and Gitpod staff reported that Gitpod workspaces were intermittently becoming unresponsive. CPU usage of nodes and pods looked normal, with nothing maxed out, and at 13:58 UTC the team found that the workspaces were IO bound rather than CPU bound.

   Throughput degradationSustained high node CPUNode NotReadyData loss

   Trigger

   The ws39 generation of workspace clusters, released to all regional clusters on April 8th at 20:08 UTC and to the XL clusters on April 9th at 17:45 UTC, split the 1TB disk into smaller RAID0 disks, changed CPU limiting and workspace networking, and moved to faster machine types.

   Root cause

   Faulty deployment

   Component

   Node root diskContainer CPU limit

   Contributing factor

   No staged rolloutGap in automated testsUnrepresentative stagingUnknown limitOverlapping failuresIneffective rollbackHarmful manual actionLimited debug access

   Detection

   Customers and Gitpod staff reported on April 11th at 13:17 UTC that workspaces were intermittently unresponsive, and the team opened an incident in Slack through its incident.io integration. On April 17th the team noticed increased CPU load on the workspace nodes and opened an internal incident.

   Remediation

   • Shifted workspace starts back to the ws38 clusters on April 11th
   • Built ws39a clusters with c2d machines and local SSDs and moved traffic to them
   • Requested a limit increase from Let's Encrypt
   • Routed EU XL traffic to the regional EU cluster and built ws-eu39bxl to replace the crashed ws-eu39xl
   • Cleaned up workspaces stuck in a stopping state so users could start them again
   • Released ws40 with 1TB boot disks to get more IO bandwidth
   • Removed the workspaces that consumed excessive CPU time for crypto-mining
   • Blocked the fraudulent users behind the crypto-mining from using Gitpod
   • Rolled back the ws-daemon change that broke CPU limiting and shipped the fix in the ws34 clusters
   • Blocked ACME HTTP requests to workspace ports so Let's Encrypt rate limits would not be hit again
   • Rolled out IO limiting with the ws41xl and ws41 clusters and moved traffic to them step by step

   Action items

   • Invest in test automation so that test results stop releases like this one
   • Vary the interval between traffic shifts to new clusters, with more time for larger releases
   • Add a risk assessment stage, to be automated, that governs changeset size and rollout speed of workspace cluster rollouts
   • Reduce the impact teams have on each other
   • Add review criteria that find backwards incompatible changes before pull requests are merged, and split such pull requests
   • Recommend rollback as the primary means of mitigation in the incident procedures, and look at automating it
   • Make the status page show the workspace service as down when it is, and update the playbooks
   • Keep incident communication in a single Slack channel and Google Meet
   • Put 10% of the engineering staff on the on-call rotation from May 9th and use that time on observability, alerting and stability

   Lessons

   Gitpod concluded that it should have committed to rolling back on April 11th instead of building and shipping fixes, which kept customers on degraded workspaces longer than necessary. A large release so soon after the previous one needed a risk assessment and slower traffic shifts, and backwards incompatible changes that block a rollback need to be found before pull requests are merged. Failure-free operations require experience with failure.

   View case

By root cause2