Cases4 cases

1 to 4 of 4

1. IL-0581 29CM product display servers lost pods and saturated Netty event loops on the first day of the Igu Week sale

   MUSINSA2025

   Symptoms

   Shortly after 29CM's Igu Week sale began on 3 November 2025, the servers for the display domain, which serve search results and product listings, showed anomalies. Some pods went down and stopped taking traffic, and the remaining pods received more traffic than they could handle and saturated their Netty event loops.

   Probe failuresIntermittent connection failuresHigh latency

   Trigger

   Igu Week, 29CM's largest Black Friday sale and its busiest traffic of the year, raised Redis network traffic to about four times normal.

   Root cause

   Capacity exhaustion

   Component

   In-memory cacheLiveness and readiness probes

   Contributing factor

   Unknown limitMonitoring blind spotHealth check tied to a dependency

   Detection

   Anomalies on the display servers, pods going down and Netty event loops saturating, were the first sign. The Redis cause was found from Redis health check failure logs and then the Redis network metrics.

   Remediation

   • Scaled the Redis nodes up from cache.r7g.large to cache.r7g.2xlarge, about twice the baseline network bandwidth

   Action items

   • Extended the monitoring dashboard to show in real time whether network in and out bandwidth exceeds the baseline, with metrics such as aws.elasticache.network_bandwidth_out_allowance_exceeded and aws.elasticache.traffic_management_active
   • Added Datadog alerts that fire when network bandwidth crosses a threshold
   • Added a Caffeine local cache in front of Redis for data that changes rarely
   • Look into compressing cached data with Snappy to reduce Redis network bandwidth
   • Look into storing cached data as Protocol Buffers instead of JSON; measured on the cached Item Document data, Snappy and protobuf together are expected to cut the size by about 73%
   • Keep improving the architecture for traffic growth, building on the cache restructuring, stronger monitoring and read separation already applied

   Lessons

   CPU and memory metrics alone did not show the problem, so Redis needs network monitoring against the node's bandwidth baseline. Burst credits kept the nodes working for about two hours after traffic passed the baseline, which delayed the failure and made its cause slower to find.

   View case
2. IL-0230 kube-proxy sync failures during a Kubernetes upgrade corrupted node iptables, and CircleCI jobs stopped starting

   CircleCI2023

   Symptoms

   On 14 March 2023 at about 18:00 UTC, communication errors rose on one CircleCI service, and pipelines for all customers began to start late until jobs did not run at all. Within an hour the errors had spread to many services and to every function of the application, including the CircleCI UI and API.

   Service outageIntermittent connection failuresDNS resolution failures

   Trigger

   At about 17:40 UTC on 14 March the infrastructure team resumed the upgrade of the main production Kubernetes cluster with a changed approach for some components, after a first attempt on 13 March had been rolled back. The ongoing upgrade left kubelet and kube-proxy at mismatched versions.

   Root cause

   Breaking change in an upgrade

   Component

   kube-proxykubeletCoreDNSClient-side DNS resolver and cache

   Contributing factor

   Partial rolloutIneffective rollbackMonitoring blind spotHarmful manual action

   Detection

   At 18:00 UTC engineers saw communication errors rise on one service, then job processing delays climbing and job queues backing up across several services. The kube-proxy "Sync failed" errors were found only in the analysis after the incident.

   Remediation

   • Restarted every node in the cluster so each node built a fresh iptables ruleset
   • Restarted a separate pool of dependencies so jobs using contexts or the machine executor ran again
   • Added capacity to work through the backlog of jobs
   • Restarted the RabbitMQ nodes to fix a few corrupted queues

   Action items

   • Improve the Kubernetes upgrade process to limit the risk of future upgrades
   • Add metrics and alerts for kube-proxy sync errors
   • Evaluate ways to make the RabbitMQ infrastructure more resilient

   Lessons

   No single trigger caused the incident. Because networking underlies everything in the cluster, Kubernetes upgrades carry inherent risk, and CircleCI's risk mitigation did not hold up when several events interacted.

   View case
3. IL-0112 The daily node rollover put DFDS's EKS nodes on an AMI later recalled for a kernel issue, causing "PLEG is not healthy" NodeNotReady flaps and pod network timeouts

   DFDS2022

   Symptoms

   On 2022-10-31 a planned upgrade of the vpc-cni EKS add-on, started from the deployment pipeline at 13:45 UTC, timed out at 14:10. Only about 10 of the 45 aws-node pods had upgraded, 5 were stuck in Terminating and the other 30 had not been attempted.

   Node NotReadyUpgrade stallIntermittent timeoutsIntermittent connection failures

   Trigger

   At 07:30 UTC on 2022-10-31 the daily node rollover replaced the existing nodes with nodes built from AMI v20221027, the latest AWS EKS node AMI, released on 2022-10-29 and later recalled because of a kernel issue.

   Root cause

   Software defect

   Component

   Node operating system imageLinux kernelkubeletAWS VPC CNINode launch templateTerraform

   Contributing factor

   No staged rolloutAutomation amplificationOverlapping failuresMonitoring blind spotNo health probes

   Detection

   The team noticed nodes flapping between NodeNotReady and NodeReady ("KubeletNotReady PLEG is not healthy") at 14:30 UTC while watching the stalled vpc-cni upgrade, about seven hours after the rollover. Time to detection was 7 hours. Alerting did not catch the NodeNotReady events or the socket growth.

   Remediation

   • cordoned, drained and deleted 15 stuck nodes one at a time to complete the vpc-cni upgrade
   • changed the Terraform infrastructure-modules so a specific AMI could be set
   • rolled the EC2 Auto Scaling group launch configuration back to the previous known good AMI through the pipeline

   Action items

   • Reach out to teams with suggestions about readiness and liveness probes
   • Create a dashboard for readiness and liveness probe coverage
   • Write a wiki article on readiness and liveness probes and their usefulness
   • Modify infrastructure-modules to allow specifying a particular AMI
   • Schedule a discussion on whether to take the latest AMI immediately and how to test new AMIs before they are deployed
   • Implement alerting on abnormal NodeNotReady events and on increased socket use
   • Create a learning path for Kubernetes within the team
   • Collect logs from nodes centrally
   • Create a Prometheus exporter that retrieves the latest available AMI, with a dashboard and alerts

   Lessons

   When a new node AMI has just been rolled out, upgrading other cluster components on the same day makes it hard to tell which change is causing trouble; here the vpc-cni upgrade on the same day confused matters. Taking the latest AMI automatically with no way to pin one meant a rollback first needed a Terraform change. The team also concluded that it needs better communication paths with application teams during incidents.

   View case
4. IL-0012 CPU limits and an unpatched kernel CFS quota bug throttled multi-threaded services into stalls, failed health checks and timeouts

   Omio2020

   Symptoms

   For about six months, applications on Omio's Google Kubernetes Engine clusters stalled at random: they got stuck, stopped answering health check requests or lost network connections, and nothing the team looked at explained why.

   CPU throttlingProbe failuresHigh error rateHigh latencyIntermittent timeoutsIntermittent connection failures

   Trigger

   Multi-threaded workloads running with CPU limits on nodes whose kernel did not yet have the fix for a known CFS quota bug that causes unnecessary throttling.

   Root cause

   Software defect

   Component

   Container CPU limitLinux kernelkubelet

   Contributing factor

   Unknown limitMonitoring blind spotUnpatched known bug

   Detection

   Months of random stalls and failed health checks led the team to read the cgroup cpu.stat throttling counters inside the pods, which showed far more throttling than the limits should allow.

   Remediation

   • removed CPU limits until the kernel with the CFS bug fix was deployed across all clusters

   Action items

   • Deploy the kernel with the CFS quota bug fix across all clusters
   • Monitor utilisation, saturation and error metrics, API latency and error rates to confirm the change behaves as expected

   Lessons

   A CPU limit is a time quota per 100 ms period, not a share of cores, so a multi-threaded container can be stopped for most of each period long before it uses the cores it was given, and a kernel bug can make that worse. Throttling is invisible in standard Kubernetes metrics and has to be read from the cgroup counters. Removing limits trades away protection against a container that takes a whole node, which is only acceptable when runtimes are tuned.

   View case

By root cause3