Cases7 cases

1 to 5 of 7

1. IL-0102 CoreDNS pods on a production EKS cluster ran out of memory under a burst of new pods, endpoints and nodes, taking down the Buildkite web UI, APIs and job dispatch

   Buildkite2026

   Symptoms

   From 22:47 UTC on 25 August 2026 the Buildkite web interface, REST API, Agent API, job queue and notifications stopped working for every customer. No one could create a build from the UI or the REST API, job dispatch was delayed, and some builds that were already running when the outage began stayed stuck until the services recovered.

   Service outageDNS resolution failuresOOMKilledAutoscaler misbehaviour

   Trigger

   At 22:44 UTC an application deploy created a surge of new pods, which used up the free capacity on the existing nodes and made the EKS cluster scale out. Background worker pools with unusually high maximum replica counts were scaling out at the same time and kept asking for more pods while new nodes were still being provisioned. Together they produced an unusually high rate of change in applications, network endpoints and nodes, and with it a sudden rise in demand on CoreDNS.

   Root cause

   Capacity exhaustion

   Component

   CoreDNSContainer memory limitHorizontal pod autoscalerNode pool

   Contributing factor

   No headroomAutomation amplificationRetry stormMonitoring blind spot

   Detection

   The first status post, at 22:55 UTC, eight minutes after the outage began, said something had gone wrong, and at 23:05 UTC the status page said a sitewide outage was being investigated. CoreDNS query duration had been rising as the cluster grew, but a defect in a key monitoring query and too little monitoring of query volume meant this went unnoticed before the outage.

   Remediation

   • paused further application deploys
   • scaled CoreDNS from three to twelve pods
   • raised each CoreDNS pod's memory limit from 512 MiB to 2 GiB
   • expanded the system node pool that runs CoreDNS

   Action items

   • Increase immediate CoreDNS headroom: twelve pods instead of three, a 2 GiB memory limit instead of 512 MiB, and a larger system node pool
   • Enable EKS-managed CoreDNS autoscaling with a tested minimum replica count and enough capacity to spread the replicas across nodes and availability zones
   • Add direct alerts on CoreDNS query duration, query volume, goroutine growth, memory pressure, OOM restarts and available replicas, and track longer-term trends in capacity planning
   • Find other cluster-critical services that lack tested capacity, direct alerting, spread across failure domains, and either safe autoscaling or documented static headroom, and fix them

   Lessons

   A CoreDNS deployment sized once and left at a fixed size can carry a growing cluster for months and then fail on the first burst of churn it cannot absorb. When query processing slows, pending queries take up memory, the pods hit their limits and restart, and client retries keep the service down after the restart. Server-side DNS query duration and volume need their own alerts: here client-side latency was masked by unrelated application speed-ups, and a broken monitoring query hid the server-side trend. Maximum replica counts raised as a temporary measure remove the cap that normally stops runaway scaling when new nodes are slow to arrive.

   View case
2. IL-0182 Too few CoreDNS replicas on EKS were overloaded during traffic spikes, raising latency and cutting the network for task pods, and the over-provisioned, tightly spread CoreDNS pods added later blocked Karpenter consolidation

   이언철2024

   Symptoms

   When traffic changed sharply, CoreDNS came under heavy load, and the cluster saw network problems and a sudden rise in latency. The horizontal pod autoscaler then added pods, database connections surged, and the impact spread to the whole service.

   High latencyIntermittent connection failuresAutoscaler misbehaviour

   Trigger

   Sharp changes in traffic loaded the small number of CoreDNS pods beyond what they could handle.

   Root cause

   Capacity exhaustion

   Component

   CoreDNSKarpenterHorizontal pod autoscalerPod scheduling and placement

   Contributing factor

   Automation amplificationHarmful manual action

   Remediation

   • Set up the Cluster Proportional Autoscaler for CoreDNS with nodesPerReplica and coresPerReplica chosen for the instance types in use
   • Spread CoreDNS with soft topologySpreadConstraints (ScheduleAnyway) instead of anti-affinity so Karpenter could consolidate nodes
   • Added alert thresholds on CoreDNS error rate, panics, request duration and request rate
   • Deployed NodeLocal DNSCache so each node answers DNS from a local cache and forwards misses to the main CoreDNS

   Lessons

   A fixed, small number of CoreDNS pods cannot follow a cluster whose nodes and pods change quickly with traffic, and the damage spreads: DNS latency triggers autoscaling, which in turn floods the database with connections. Simply adding many CoreDNS replicas created a different problem, because with tainted nodes and a maxSkew: 1 spread constraint the pods piled onto a few nodes and blocked Karpenter consolidation. Scaling CoreDNS in proportion to the cluster and putting a DNS cache on every node handled both.

   View case
3. IL-0168 Simultaneous cluster auto-upgrades overloaded Scaleway's Kubernetes API, and a node authentication retry loop kept Kapsule and Kosmos nodes NotReady in FR-PAR

   Scaleway2024

   Symptoms

   At 01:04 CET on 13 February 2024, the Kubernetes API behind Scaleway's managed Kubernetes services Kapsule and Kosmos in the Paris region (FR-PAR) spiked in RAM and CPU use and ran out of memory. Nodes in FR-PAR could no longer authenticate to their control plane, and some of them went "Not Ready". Customers on both shared (mutualized) and dedicated environments were affected.

   Node NotReadyControl plane lagOOMKilled

   Trigger

   A new Kubernetes release was made available to all users on 12 February 2024, and during the night of 12 to 13 February many clusters triggered their auto-upgrade at the same time.

   Root cause

   Capacity exhaustion

   Component

   Kubernetes API server

   Contributing factor

   Retry stormAutomation amplificationNo staged rollout

   Detection

   The timeline's first entry, at 01:04 CET, records the Kubernetes API's RAM and CPU spikes and out-of-memory state, with nodes unable to authenticate to their control plane and some becoming "Not Ready". The first recorded action, 42 minutes later at 01:46, was to increase the resources allocated to the API.

   Remediation

   • increased the resources allocated to the Kubernetes API at 01:46 and again at 02:20
   • applied API traffic restrictions at 02:30 to smooth the incoming traffic
   • removed the traffic restrictions progressively in 50-100 batches from 03:20
   • ran a script at 03:40 to replace the failing nodes created during the congestion
   • rolled back to the former node authentication mechanism, first on a subset of clusters from 15:45 and on all clusters by 19:41 on 19 February
   • disabled cluster upgrade and configuration update features until 10:30 on 20 February

   Action items

   • Increase the resources allocated to the Kubernetes API
   • Roll back to the former node authentication mechanism
   • Implement a local authentication cache on nodes
   • Rework the resource allocation strategy to behave better under load spikes
   • Add new request queuing mechanisms for Kubernetes
   • Separate the different components to reduce side effects under high load or failure
   • Monitor selected metrics closely to identify anomalous patterns earlier
   • Refund customers who deployed nodes during the incident but could not use them normally

   Lessons

   Letting many clusters auto-upgrade at the same moment after a release turns routine upgrades into one coordinated load spike on the shared Kubernetes API. A node authentication mechanism that retries without letting up turns a slow API into an unavailable one, and auto-healing that replaces NotReady nodes amplifies the problem. The congestion pattern had already appeared three weeks earlier, and short-term mitigations did not stop it from recurring, so Scaleway rolled back the new authentication mechanism. Scaleway notes that as the number of customer clusters and nodes grows sharply, traffic control mechanisms have to improve to prevent congestion.

   View case
4. IL-0202 A burst of queries and database writes exhausted connection pools and memory on Honeycomb's ingest hosts, and Kubernetes crash-loop back-off kept failed hosts offline so ingest capacity stayed too low to recover

   Honeycomb2023sev1

   Symptoms

   Standard alerting paged Honeycomb's on-call engineers about the performance and stability of event ingestion, and the automated load-shedding mechanisms tripped and sent further notifications. The status page described a higher than normal error rate and response time on the ingestion service.

   High error rateHigh latencyContainer crash loopService outageDatabase overload

   Trigger

   An abnormally large number of queries arrived from many separate connections within a few minutes.

   Root cause

   Capacity exhaustion

   Component

   Application databaseIn-memory cache

   Contributing factor

   Retry stormAutomation amplification

   Detection

   Standard alerting notified the on-call engineers about ingestion performance and stability, and the automated load-shedding mechanisms added notifications when they tripped. The first status post, about alerts on a higher than normal error rate and response time, went up at 18:28 PST (02:28 UTC), 13 minutes after the 02:15 UTC start.

   Remediation

   • Scaled the ingest fleet up manually and aggressively
   • Cut off most ingest for a few minutes so the ingest hosts could come back with enough capacity
   • Temporarily lowered the rate limits for the most aggressive traffic sources until their traffic subsided

   Action items

   • Keep the ingest fleet scaled up to prevent a repeat while longer-term fixes are worked on
   • Decide on the projects that will address these failure paths

   Lessons

   Load shedding and auto-scaling were in place, yet a burst that arrived faster than the cache could spread its writes still took the ingest hosts down. During recovery, Kubernetes' crash loop back-off worked against the operators: the hosts that had failed stayed offline while the fleet needed every host. Clients that retry whole OTel batches after a partial drop can multiply traffic many times over, so per-source rate limits were what finally stabilised ingest.

   View case
5. IL-0037 Image registry rate-limited a whole region after a crash-looping DaemonSet with imagePullPolicy Always pulled through three NAT instances

   Datadog2019

   Symptoms

   Users reported that their jobs were not starting, with some sign that image pulls were involved. Many pods across the cluster were in error states related to image pulls, while applications that were already running were not affected.

   Image pull failuresService outage

   Trigger

   A change to the permissions on a storage bucket that one application needed to read. The application could no longer start, and its DaemonSet, running on roughly a thousand nodes of the cluster, went into a crash loop with imagePullPolicy: Always, so every restart pulled the image again although it was already on the node.

   Root cause

   Capacity exhaustion

   Component

   Container registry and its credentialsNAT gatewayApplication databaseAdmission webhook

   Contributing factor

   Automation amplificationSingle point of failureUnknown limitHarmful manual actionExcessive blast radius

   Detection

   Users reported that their jobs were not starting; monitoring had not caught it first.

   Remediation

   • replaced the affected NAT instances so registry traffic came from new source IPs
   • reconfigured the static IPs and firewall rules so applications could reach the Cloud SQL database again

   Action items

   • Add an admission webhook that rejects floating image tags, starting with latest
   • Apply the image tag webhook to workload objects only, not to pods, after it blocked pods created by in-cluster controllers

   Lessons

   The speakers' takeaway is to be very careful with DaemonSets in large clusters: they say they had broken everything DaemonSets depend on, including DNS, Vault and the image repository, and that it is very easy to break things when managing them by the thousand. imagePullPolicy: Always made every crash-loop restart pull the image again. Sending all registry traffic through three NAT instances put the whole region behind three source IPs, which the registry rate-limited, and changing those IPs cut the connections to a critical database reached over the internet through them. An admission webhook on pods rejects the pods that controllers in the cluster create, where no user sees the error.

   View case

By root cause1