Cases4 cases

1 to 4 of 4

1. IL-0183 kubeadm's one-year leaf certificates expired, so kube-apiserver could not reach etcd, restarted in a loop and left the cluster unreachable

   ckck8032026

   Symptoms

   The cluster could not be reached from outside. On the control plane node, sudo systemctl status kubelet showed TLS handshake errors such as "http: TLS handshake error from 101.198.0.183:19517: tls: client requested unsupported application protocols" and "http: TLS handshake error from 101.198.0.172:36328: tls: client offered only unsupported versions: [302 301]".

   Control plane unresponsiveContainer crash loop

   Trigger

   The leaf certificates that kubeadm had generated for the cluster, valid for one year by default, expired at 2026-02-20 16:16 UTC.

   Root cause

   Certificate or credential expiry

   Component

   Kubernetes API serveretcdkubeletCalico

   Contributing factor

   Unreviewed defaults

   Detection

   The author could not connect to the cluster from outside and went to the control plane node to read the kubelet logs.

   Remediation

   • renewed all expired certificates with sudo kubeadm certs renew all
   • restarted containerd and the kubelet so the static control plane pods restarted with the new certificates
   • copied the renewed /etc/kubernetes/admin.conf to $HOME/.kube/config

   Lessons

   A kubeadm cluster stops working one year after its leaf certificates were issued unless they are renewed. The first errors seen may be TLS handshake failures or a flag error that does not mention certificates; the decisive message is the x509 expiry in the kube-apiserver log for its connection to etcd. The author recommends checking expiry with kubeadm certs check-expiration and renewing from 30 days before. kubeadm upgrade apply renews the certificates too, so a cluster upgraded at least once a year avoids the problem; a cluster run for a long time without upgrades can renew from cron, for example with 0 3 1 1 * root kubeadm certs renew all && systemctl restart kubelet in /etc/cron.d/kubeadm-cert-renew.

   View case
2. IL-0187 A brief Spring Cloud Config Server downtime failed every client application's liveness probe, because the actuator health check included the config server, and Kubernetes restarted the pods in a kill loop

   Yonghyun Kim2025

   Symptoms

   While the Spring Cloud Config Server was briefly down for an upgrade, every client application began to answer its liveness probe with a failure saying it could not reach the config server.

   Probe failuresContainer crash loopService outage

   Trigger

   A downtime upgrade of the Spring Cloud Config Server made it stop responding for a short time.

   Root cause

   Dependency failure

   Component

   Liveness and readiness probes

   Contributing factor

   Unreviewed defaultsAutomation amplificationExcessive blast radius

   Lessons

   A liveness probe that includes an external dependency turns a short outage of that dependency into a restart loop of every client. Keep external dependencies out of liveness checks and handle temporary problems with readiness probes. Libraries can add health indicators to Spring Boot's actuator health endpoint automatically, so check what the probe path actually reports. The author ran another Kubernetes environment for two years without liveness probes, relying on strict readiness probes and on the application terminating itself on unrecoverable faults.

   View case
3. IL-0103 During an EKS node AMI update, Istio sidecars crash-looped because hundreds of pods restarting at once overloaded the external certificate authority behind istiod

   Tetrate (unnamed U.S. federal customer)2025sev1

   Symptoms

   While the customer was updating the AMIs of its Amazon EKS nodes across more than 30 clusters running Istio, sidecar-injected workloads in one cluster failed to start and showed CrashLoopBackOff.

   Container crash loopProbe failures

   Trigger

   Updating the EKS node AMIs, which started hundreds of sidecar-injected pods at the same time.

   Root cause

   Dependency failure

   Component

   IstioAdmission webhookNode operating system image

   Contributing factor

   Unreviewed defaultsUnknown limit

   Detection

   Sidecar-injected workloads in the updated cluster failed to start and showed CrashLoopBackOff; the customer raised a Severity 1 ticket and a Tetrate engineer was reviewing logs within six minutes.

   Remediation

   • scaled istiod down temporarily from 40 replicas to 1 to slow Istio's internal processes and ease the load on the CA
   • deleted the CertificateSigningRequests stuck in the Approved, Failed state
   • restarted the pods gradually in a controlled order instead of all at once

   Lessons

   When a mesh hands certificate signing to an external CA, every pod start becomes a signing request to that CA, so a mass restart such as a node image rollout can overload it. Sidecars then abort under istiod's 10-second default CA timeout even though the CSRs are eventually signed. Restarting pods in controlled batches keeps the request rate within what the CA can handle. The author's point is that diagnosing such a failure means looking at the whole service mesh ecosystem, including its external dependencies, not only Istio.

   View case
4. IL-0107 Kyverno stuck in a crash loop behind a webhook with failurePolicy fail blocked every change to Kubernetes Service objects for 88 minutes

   DFDS2022

   Symptoms

   At 11:38 UTC on 3 August 2022 an end-user team told the platform team that applying a Service resource to one of the Kubernetes clusters failed.

   Deploys failingContainer crash loop

   Trigger

   A certificate chain in a third-party application expired, through no action of DFDS, and the outdated Kyverno installation got stuck in a crash loop.

   Root cause

   Certificate or credential expiry

   Component

   Policy engineAdmission webhook

   Contributing factor

   Deferred upgradesUnreviewed defaultsMonitoring blind spotIgnored early signal

   Detection

   An end-user team alerted the platform team at 11:38 UTC that applying a Service resource failed; the platform team started looking into it at 11:50 UTC.

   Remediation

   • reproduced the issue in a sandbox cluster and deployed the fix there first
   • updated Kyverno to a newer Helm chart version in the affected production cluster

   Action items

   • Implement monitoring on Kyverno
   • Create internal documentation on the Kyverno setup
   • Investigate the exact certificate issue in the third-party application
   • Consider changing the failurePolicy on ClusterPolicy resources going forward

   Lessons

   Operational issues should be added to the 'Ops Day to Day' board from the start.

   View case

By root cause2