Cases5 cases

1 to 5 of 5

1. IL-0029 Slow user-facing services from CPU throttling on containers that used far less CPU than their limit

   Buffer2020

   Symptoms

   Services on Buffer's kops-managed cluster on AWS (about 60 nodes and 1500 containers) answered more slowly than they should have. The container throttling metric showed that many containers were being throttled whatever their CPU usage was, including containers that never came close to their CPU limit.

   CPU throttlingHigh latencyNode NotReady

   Trigger

   CPU limits on user-facing services, enforced through CFS quota by a Linux kernel with a bug that throttled containers even when they were well under their limit.

   Root cause

   Software defect

   Component

   Container CPU limitLinux kernelNode operating system image

   Contributing factor

   Unpatched known bugUnverified assumption

   Detection

   While reviewing the container throttling metric, the team noticed many containers being throttled even though their CPU usage stayed far below their limits.

   Remediation

   • removed CPU limits from all services directly or indirectly on the users' critical path
   • moved those services to dedicated tainted nodes and gave them matching tolerations
   • set each service's CPU request to its peak usage over a few months plus a margin of more than 20%, and set memory requests the same way

   Action items

   • Move nodes to a kernel that contains the CFS throttling fix (4.19 or later), which for Buffer means a kops version whose host image is Ubuntu 20.04
   • After the kernel upgrade, check whether throttling is fully gone and update the post

   Lessons

   A CPU limit can slow a service down even when the service uses a small part of it, because of how the kernel enforces CFS quota on older kernels; the throttling metric shows it, the CPU usage graph does not. Upgrading the kernel is the safer fix. Removing limits works for latency, but only together with honest CPU and memory requests, isolation of the unbounded services, and monitoring of node usage, since unbounded containers can starve the kubelet.

   View case
2. IL-0193 A GCP persistent disk degradation took down a Cassandra StatefulSet whose OrderedReady policy blocked recovery, and Metrictank could not reconnect to the recreated pods, causing a 23-hour Graphite query outage

   Grafana Labs2019

   Symptoms

   An alert fired because some Metrictank instances could not drain their write queue, which meant they could not write to Cassandra. Google had not yet published an incident, but a team member's Discord server, also hosted on GCP, was down, which pointed at GCP; Google confirmed an SSD persistent disk incident about 90 minutes after it began.

   High error rateNode NotReadyPods PendingService outage

   Trigger

   A Google Cloud incident in which SSD persistent disks performed so poorly that many I/O operations failed for an extended period.

   Root cause

   Cloud provider outage

   Component

   Persistent volumes and stateful setsApplication databaseNode root disk

   Contributing factor

   Overlapping failuresUnpatched known bugUnverified assumption

   Detection

   An alert that Metrictank write instances could not flush their write queue to Cassandra. Error rates alone rose too slowly to notice quickly, because most queries were served from memory.

   Remediation

   • Added compute nodes hoping new nodes could attach the disks, which did not work
   • Deleted and recreated the Cassandra StatefulSet with an updated pod management policy, so all pods but one started
   • Raised Kafka topic retention to avoid data loss during the long downtime
   • Temporarily added nodes so Metrictank restarts were not slowed by CPU starvation
   • Restarted all Metrictank instances, which took more than 20 hours, so they connected to the new Cassandra IPs

   Action items

   • Re-instantiate the gocql connection in Metrictank when it is detected dead, so it reconnects even when all Cassandra IPs change
   • Fix the Metrictank write-queue deadlock by updating an internal data structure with atomics instead of a lock

   Lessons

   An OrderedReady StatefulSet cannot recover past a single pod whose volume will not attach; when every pod is down, the ordering that protects normal start-up blocks the whole cluster. A client that learns peer addresses only from live peers needs a way to go back to the service name when all peers are replaced at once. A long-tolerated bug with a config workaround can surface at the worst time; this one turned out to have a simple fix. Writing incoming data to a Kafka write-ahead log first meant all data could still be ingested after recovery, and Kafka on non-SSD disks escaped the disk incident. With both Metrictank bugs fixed, the team expects a similar event to take less than 3 hours to recover from instead of 23.

   View case
3. IL-0030 Most nodes of a cluster went NotReady together for 15 minutes while the API server sat behind an AWS ELB

   Zalando2019

   Symptoms

   Fewer than 20% of the nodes in one Zalando cluster were available. Most nodes reported NotReady at the same moment, and only a handful stayed Ready.

   Node NotReady

   Root cause

   Software defect

   Component

   Kubernetes API serverCloud load balancer

   Contributing factor

   Unpatched known bug

   Remediation

   • none; the nodes recovered on their own after about 15 minutes

   View case
4. IL-0073 Intermittent Kafka connectivity overloaded Docker daemons, set off a node rescheduling cascade and poisoned the Consul gossip mesh

   Target2019sev1

   Symptoms

   An upgrade of the network subsystem under Target's datacenter OpenStack, meant to cause only a brief disruption, ran into problems and left network connectivity disrupted for several hours. Kafka, which runs on that OpenStack, became intermittently available.

   Node NotReadyLoad imbalanceHigh latencyCredentials unavailable

   Trigger

   A network subsystem upgrade in the datacenter OpenStack infrastructure disrupted connectivity for several hours and made Kafka intermittently available.

   Root cause

   Dependency failure

   Component

   Container runtimeService discoveryTelemetry agentCredential broker for pods

   Contributing factor

   Excessive blast radiusAutomation amplificationSingle point of failureUnpatched known bug

   Remediation

   • enabled gossip encryption on Consul so messages from the poisoned mesh were rejected
   • stabilized the deployment engine and redeployed the development environment with encryption, terminating instances without it
   • upgraded Consul in place to 1.2.3 and then to 1.3.0

   Action items

   • Reduce how much of an outage a single Docker daemon can cause, together with running smaller and more numerous clusters

   Lessons

   Smaller and more numerous clusters limited the damage: the smaller development clusters and production were not hit the same way as the one large cluster, and dev and prod on one cluster would have been far worse. A Docker daemon shared by many workloads is a brittle failure point. Per-workload logging and metrics sidecars were judged the right design; a shared cluster-level agent would almost certainly have made the problem worse and harder to fix.

   View case
5. IL-0074 All AirMap platform services down as worker nodes went NotReady and pods crash-looped on network and DNS failures

   AirMap2018

   Symptoms

   At about 15:00 UTC on 19 July 2018, monitoring alerted on rising 5xx responses from several APIs, most notably pilot and tiles. Logins failed first, because the pilot service fetches the user's profile, and from there all services became unresponsive. Every affected API ran on the production Kubernetes cluster.

   High error rateNode NotReadyDNS resolution failuresContainer crash loopService outage

   Root cause

   Software defect

   Component

   kubelet

   Contributing factor

   Unpatched known bug

   Detection

   Monitoring alerted on an increase in 5xx responses from several APIs, most notably pilot and tiles.

   Remediation

   • restarted the kubelets on the stuck worker nodes, which did not last
   • restarted all worker nodes in a staggered order starting at about 18:00 UTC, which took about 1.5 hours

   Action items

   • Restart nodes on a rolling schedule to keep nodes and kubelets healthy until the fixes land upstream and reach the cloud provider, Microsoft Azure

   Lessons

   When nodes keep falling back to NotReady after kubelet restarts and pods fail on network and DNS errors, a known upstream bug may be the cause; matching the symptoms to the upstream issue tracker, with help from the community, found the cause and the fix candidates.

   View case

By root cause3