Cases2 cases

1 to 2 of 2

1. IL-0112 The daily node rollover put DFDS's EKS nodes on an AMI later recalled for a kernel issue, causing "PLEG is not healthy" NodeNotReady flaps and pod network timeouts

   DFDS2022

   Symptoms

   On 2022-10-31 a planned upgrade of the vpc-cni EKS add-on, started from the deployment pipeline at 13:45 UTC, timed out at 14:10. Only about 10 of the 45 aws-node pods had upgraded, 5 were stuck in Terminating and the other 30 had not been attempted.

   Node NotReadyUpgrade stallIntermittent timeoutsIntermittent connection failures

   Trigger

   At 07:30 UTC on 2022-10-31 the daily node rollover replaced the existing nodes with nodes built from AMI v20221027, the latest AWS EKS node AMI, released on 2022-10-29 and later recalled because of a kernel issue.

   Root cause

   Software defect

   Component

   Node operating system imageLinux kernelkubeletAWS VPC CNINode launch templateTerraform

   Contributing factor

   No staged rolloutAutomation amplificationOverlapping failuresMonitoring blind spotNo health probes

   Detection

   The team noticed nodes flapping between NodeNotReady and NodeReady ("KubeletNotReady PLEG is not healthy") at 14:30 UTC while watching the stalled vpc-cni upgrade, about seven hours after the rollover. Time to detection was 7 hours. Alerting did not catch the NodeNotReady events or the socket growth.

   Remediation

   • cordoned, drained and deleted 15 stuck nodes one at a time to complete the vpc-cni upgrade
   • changed the Terraform infrastructure-modules so a specific AMI could be set
   • rolled the EC2 Auto Scaling group launch configuration back to the previous known good AMI through the pipeline

   Action items

   • Reach out to teams with suggestions about readiness and liveness probes
   • Create a dashboard for readiness and liveness probe coverage
   • Write a wiki article on readiness and liveness probes and their usefulness
   • Modify infrastructure-modules to allow specifying a particular AMI
   • Schedule a discussion on whether to take the latest AMI immediately and how to test new AMIs before they are deployed
   • Implement alerting on abnormal NodeNotReady events and on increased socket use
   • Create a learning path for Kubernetes within the team
   • Collect logs from nodes centrally
   • Create a Prometheus exporter that retrieves the latest available AMI, with a dashboard and alerts

   Lessons

   When a new node AMI has just been rolled out, upgrading other cluster components on the same day makes it hard to tell which change is causing trouble; here the vpc-cni upgrade on the same day confused matters. Taking the latest AMI automatically with no way to pin one meant a rollback first needed a Terraform change. The team also concluded that it needs better communication paths with application teams during incidents.

   View case
2. IL-0115 One of OpenAI's three production AKS clusters went offline through a human error, and rebuilding it took 10½ hours because an AKS Kubernetes upgrade broke the ingress and AKS cannot be downgraded

   OpenAI2022

   Symptoms

   At 18:56 PDT on 23 June 2022 (01:56 UTC on 24 June) several models went offline at once: some fine-tuned curie and davinci models, the Codex beta models code-davinci-001 and code-cushman-001, the legacy GPT models curie, babbage and ada, and all Embeddings models.

   Service outageHigh error rateIntermittent timeouts

   Trigger

   A destructive operation on one of the three production clusters, caused by human error that the existing safeguards did not catch, took the whole cluster offline.

   Root cause

   Operator error

   Component

   Ingress controllerModel hub

   Contributing factor

   No safeguard on destructive changeNo headroomDeferred upgradesOverlapping failures

   Remediation

   • re-allocated the models from the lost cluster to the remaining two clusters
   • rebuilt the VPN link with Azure support after losing the connection to AKS during cluster setup
   • built workarounds with Azure support after losing the connection to Azure Private Link
   • tore down the cluster and rebuilt it from scratch after the upgraded Kubernetes version broke the ingress
   • moved traffic back into the rebuilt cluster between 05:30 and 06:30 PDT

   Action items

   • Add checks and locks so that this and similar production-critical infrastructure cannot be modified by accident
   • Add better visibility into the operations being performed and make parts of the system more lexicographically distinct
   • Keep working with Azure on the AKS network connectivity issues so they do not disrupt new cluster operations
   • Update playbooks with the new cluster failure modes and change the setup steps for new clusters and infrastructure
   • Upgrade Kubernetes systematically and set aside time so the clusters do not fall behind again
   • Shard fine-tuned models across multiple clusters and work towards more automatic cross-cluster replication
   • Distribute and replicate Azure Blob Storage so fine-tuned models load faster and more reliably
   • Finish rolling out node-to-node caching to relieve Azure Blob Storage bottlenecks
   • Change how model weights are stored so they are more efficient and faster to load

   Lessons

   Losing one of three clusters exhausted the GPU headroom, and GPUs could not be added on short notice, so full recovery depended on bringing the same cluster back. Rebuilding it exposed a deferred Kubernetes upgrade: the newer version broke the ingress, and because AKS cannot downgrade there was no way back except a full rebuild. Recovering many large models at once is limited by the bandwidth of the storage they load from, and the caches that normally hide this do not help when everything moves to a different cluster.

   View case

By root cause2