Cases8 cases

5 to 8 of 8

1. IL-0049 Partial DNS outage after CoreDNS scaled down and kube-proxy failed to delete stale conntrack entries

   Preply2020

   Symptoms

   Prometheus detected a high rate of 5xx responses on three services, called A, B and C in the write-up, and paged the on-call engineers through VictorOps at 22:18 EET. The 5xx rate was also visible in Kibana.

   DNS resolution failuresHigh error rateStale endpoint routing

   Trigger

   Because load in the cluster was low, the CoreDNS autoscaler reduced the number of CoreDNS pods from 3 to 2.

   Root cause

   DNS or network fault

   Component

   CoreDNSkube-proxyconntrack table

   Contributing factor

   Automation amplificationIgnored early signalNo caching

   Detection

   Prometheus alerted on a high 5xx rate on services A, B and C and paged on-call through VictorOps.

   Remediation

   • reverted the latest release of the affected service
   • a regular deploy created new nodes, the CoreDNS autoscaler added CoreDNS pods, and the conntrack table was rewritten

   Action items

   • Disable the autoscaler for CoreDNS
   • Run a DNS cache server in production
   • Monitor conntrack usage

   Lessons

   Scaling CoreDNS down is not free: if kube-proxy fails to clear conntrack entries for the removed pod, clients keep sending DNS queries to it. Known DNS weaknesses in a cluster should be prioritised before they cause an outage, and fixes that only treat consequences leave the underlying conntrack problem in place.

   View case
2. IL-0013 The conntrack table filled up on downsized GKE nodes and a high-traffic aggregation proxy saw climbing connection resets

   loveholidays2020

   Symptoms

   Shortly after a round of changes, loveholidays saw connectivity problems and raised error rates on its aggregation service. The service is a proxy between two other services of more than 100 instances each, handles over 10,000 requests per second continuously and can spike to four times that.

   Connection resetsHigh error rateIntermittent connection failures

   Trigger

   Three changes together: a change in service architecture, halving the RAM of the nodes that run the aggregation service, and sharding a downstream service, which doubled the number of connections to track.

   Root cause

   Capacity exhaustion

   Component

   conntrack tablekube-proxyNode poolHAProxy

   Contributing factor

   Unknown limitNo capacity planningNo alert on limit

   Detection

   Rising error rates and climbing connection reset errors in HAProxy, then node_exporter conntrack metrics compared with their limit.

   Remediation

   • moved the aggregation service to nodes with more RAM
   • limited the number of aggregation service pods per node

   Action items

   • Alert when conntrack table use goes above 75%, with (node_nf_conntrack_entries / on (pod) node_nf_conntrack_entries_limit / on (pod) group_right kube_pod_info) > 0.75

   Lessons

   The conntrack limit is tied to node memory, so resizing a node pool silently resizes the connection table, and on GKE the ratio did not match the commonly cited formula. A high-traffic proxy on small nodes can exhaust it, and the symptoms are connection resets and timeouts, so conntrack use needs its own metric and alert.

   View case
3. IL-0057 Higher p99 latency after moving a reverse proxy to EKS, from outgoing connections delayed by a SNAT conntrack race

   Prezi2019

   Symptoms

   Prometheus alerts fired on tail latency: from 7/24, the p99 response time of a few services went up after Prezi moved its Nginx-based reverse proxy, smartgateway, from dedicated Elastic Beanstalk machines onto shared Kubernetes worker nodes. The bump affected only the tail, so the earlier monitoring of average response times would most certainly have missed it.

   High latencyIntermittent timeouts

   Trigger

   Moving the reverse proxy onto shared EKS worker nodes, where its outgoing connections went through source NAT on the node and some SYN packets were dropped by a race in Netfilter's conntrack.

   Root cause

   DNS or network fault

   Component

   conntrack tableAWS VPC CNILinux kernelNode operating system image

   Contributing factor

   Unreviewed defaultsUnpatched known bug

   Detection

   Prometheus alerts on p99 latency fired after the reverse proxy migration.

   Remediation

   • added AWS X-Ray tracing and an $upstream_connect_time trace attribute to locate the delay
   • ran more pods of the service on more nodes, which reduced but did not end the delays
   • set AWS_VPC_K8S_CNI_EXTERNALSNAT=true on the AWS VPC CNI to turn off SNAT on the nodes

   Lessons

   Alerting on tail latency instead of averages caught a problem that would otherwise have gone unnoticed, and tracing turned a vague slowdown into a measured connect delay. Delays of exactly 1 or 3 seconds on new outgoing connections point to dropped SYN packets, and on EKS the SNAT done by the VPC CNI is where to look.

   View case
4. IL-0047 Pod-to-pod requests delayed by 5, 10 or 15 seconds because of DNS lookups lost to a conntrack race

   MindTickle2019

   Symptoms

   Pod-to-pod calls were intermittently slow and the web application felt slow overall. A request that pod A sent at time x reached pod B at x + 5s, x + 10s or x + 15s, always a multiple of five seconds.

   Intermittent timeoutsHigh latencyDNS resolution failures

   Trigger

   The C library resolver sent the A and AAAA queries for each lookup on the same port; where DNAT or SNAT translation takes place, a race condition in conntrack sometimes left one of the queries unanswered, and the resolver waited 5 seconds before retrying.

   Root cause

   DNS or network fault

   Component

   conntrack tableClient-side DNS resolver and cacheLinux kernel

   Contributing factor

   Unreviewed defaults

   Detection

   The team noticed intermittent delays in pod-to-pod calls and slowness in the web application, and that the delays were always multiples of five seconds.

   Remediation

   • added the single-request-reopen option to dnsConfig in the deployment specs
   • set GRPC_DNS_RESOLVER=native in the Dockerfiles of gRPC applications so they used the libc resolver
   • checked with tcpdump port 53 that A and AAAA queries left from different ports

   Lessons

   Delays that are exact multiples of five seconds point to DNS lookups being retried after the resolver's 5-second timeout. A resolver option set in the pod spec only helps processes that use the libc resolver; runtimes with their own resolver, such as gRPC with c-ares, ignore it.

   View case

By root cause4