Cases18 cases

6 to 10 of 18

1. IL-0154 Line cards on an SFO3 core router rebooted together and halved backbone capacity, and DOKS nodes whose guest networking did not recover stayed NotReady with degraded API servers until all affected nodes in the SFO3 DOKS fleet were recycled

   DigitalOcean2024

   Symptoms

   From 22:25 to 22:50 UTC every DigitalOcean service in the SFO3 region had network connectivity problems, as traffic between the datacenter and the backbone dropped. Traffic through the router was back by 22:30 and SFO3's control plane systems had reconnected by 22:50, and most services recovered then.

   Node NotReadyControl plane unresponsiveIntermittent connection failures

   Trigger

   Most of the line cards on one SFO3 core router rebooted at the same time at 22:21 UTC because of hardware errors on the device.

   Root cause

   DNS or network fault

   Component

   Kubernetes API serverkubelet

   Contributing factor

   –

   Remediation

   • The crashed line cards came back online and traffic on the core router was restored
   • Manually recycled all affected nodes across the SFO3 DOKS fleet

   Action items

   • Work with the router vendor's support team to find the root cause of the line card crash
   • Upgrade software on the core routers in SFO3
   • Raise thresholds for automated remediation so affected nodes are restored without manual action

   Lessons

   A short network fault can leave Kubernetes nodes broken long after the network itself is healthy, when the guest networking on the machines does not recover by itself. Checking node health and the API servers after the network returns, and having automated remediation that is allowed to replace many nodes at once, shortens that tail.

   View case
2. IL-0077 EKS cluster went read-only for over seven hours after Kyverno ephemeralreports filled the etcd database past its size limit

   Marcin Cuber2024sev1

   Symptoms

   A production EKS cluster on Kubernetes 1.30 went into read-only mode: the API server rejected every request that would change an object, such as creating pods or scaling deployments, and deleting objects to free space did not work either.

   Control plane unresponsiveControl plane lag

   Trigger

   Kyverno 1.12 kept creating ephemeralreports objects that piled up in etcd until the database passed EKS's size limit.

   Root cause

   Software defect

   Component

   etcdKubernetes API serverPolicy engine

   Contributing factor

   No alert on limitLimited debug access

   Detection

   The cluster rejected writes; the audit logs carried the "etcdserver: mvcc: database space exceeded" error.

   Remediation

   • AWS raised the etcd storage limit from 8/10GB to 12GB to unlock writes
   • an AWS engineer deleted the leaked Kyverno ephemeralreports objects directly from etcd

   Action items

   • Monitor the etcd database size with apiserver_storage_size_bytes and never let it reach 8GB
   • Upgrade Kyverno 1.12 to 1.12.4, which fixes the ephemeralreports pile-up, or disable reporting for admission events and tune --aggregationWorkers

   Lessons

   On EKS, once etcd hits its size limit the cluster becomes read-only and only AWS can clean it up, so cleanup scripts must run before the limit is reached. Watch the etcd database size and object counts per resource, especially for controllers that create report objects.

   View case
3. IL-0152 An incorrect configuration applied during maintenance made an internal infrastructure cluster automatically delete the control planes of 200 DOKS clusters in FRA1

   DigitalOcean2024

   Symptoms

   At 13:02 UTC on 2024-01-23 DigitalOcean posted that, as of 12:18 UTC, its engineers were investigating an issue with Kubernetes clusters in the FRA1 region and that users might see errors when communicating with their clusters. The control planes of the affected DOKS (DigitalOcean Kubernetes) clusters had become inaccessible.

   Resources deletedControl plane unresponsive

   Trigger

   An incorrect configuration was applied to an internal infrastructure cluster in FRA1 at 12:21 UTC during a maintenance operation.

   Root cause

   Configuration change

   Component

   etcdKubernetes API server

   Contributing factor

   Automation amplificationNo safeguard on destructive changeExcessive blast radius

   Detection

   Engineers were investigating errors with Kubernetes clusters in FRA1 as of 12:18 UTC and identified the incorrect configuration as the cause at 12:36.

   Remediation

   • restored each affected cluster's etcd from its latest twice-daily backup
   • restored the stateless control plane components after etcd
   • patched the recovery mechanism after unexpected problems during recovery
   • found and fixed an additional small bug during recovery
   • contacted affected customers directly with further instructions, since some might need to reconfigure Kubernetes resources

   Action items

   • Prevent automatic deletion of infrastructure cluster resources under any circumstances in the production environment

   Lessons

   When managed control planes run as resources in another cluster, one configuration mistake in that cluster can delete hundreds of control planes at once through ordinary automation. The etcd backups limited the damage, but their twice-daily schedule set the worst case at 12 hours of lost control plane state, and the recovery tooling itself needed patching during the incident.

   View case
4. IL-0195 The kube-apiservers of a cluster with more than 200 nodes ran out of memory and crashed one after another under mass LIST requests from Cilium agents

   Palark2023

   Symptoms

   A tech support engineer called Palark to say that a customer's cluster, production environment included, had practically stopped working. On the control plane nodes the kube-apiserver processes had used up all the memory and were crashing and restarting over and over, so the Kubernetes API was unreachable and completely non-functional.

   Control plane unresponsiveOOMKilled

   Trigger

   Cilium agent pods on more than 200 nodes sent LIST requests to the Kubernetes API en masse at the same time.

   Root cause

   Capacity exhaustion

   Component

   Kubernetes API serverCilium

   Contributing factor

   Unreviewed defaults

   Detection

   A tech support engineer phoned the team to report that the customer's cluster was practically non-operational.

   Remediation

   • added CPU and memory to the control plane nodes in two steps, from 8 CPUs and 16 GB of RAM to 16 CPUs and 64 GB, until the API stabilised
   • restarted the Cilium agents in a test window agreed with the customer to reproduce the memory growth
   • deployed a FlowSchema and a PriorityLevelConfiguration named cilium-pods that limit and queue LIST requests from the Cilium service accounts to cilium.io resources
   • reduced the control plane nodes back to their original resources

   Action items

   • Make an API Priority and Fairness configuration a standard part of Palark's Kubernetes platform

   Lessons

   In a large cluster, many agents sending LIST requests at once can exhaust kube-apiserver memory, and with several API servers the crash moves from one to the next. APF can hold back such a client: a FlowSchema matches its requests and a PriorityLevelConfiguration gives them a small concurrency share and a queue, so the requests run more slowly instead of all at once. With APF enabled, the total concurrency it divides is the sum of --max-requests-inflight (default 400) and --max-mutating-requests-inflight (default 200), shared among priority levels in proportion to their assured concurrency shares, so raising one level's share lowers every other level's limit. Long-running requests such as logs and exec, and WATCH requests, are not subject to APF. The response headers X-Kubernetes-PF-FlowSchema-UID and X-Kubernetes-PF-PriorityLevel-UID show where a request landed, and the metrics Apiserver_flowcontrol_rejected_requests_total, Apiserver_current_inqueue_requests and Apiserver_flowcontrol_request_execution_seconds, with the debug endpoints /debug/api_priority_and_fairness/dump_priority_levels and /debug/api_priority_and_fairness/dump_queues, show how the queues behave.

   View case
5. IL-0165 Some LKE users in Frankfurt could not reach their kube-apiservers with kubectl after backend services failed under memory constraints

   Linode2023

   Symptoms

   At 14:11 UTC on May 25, 2023, Linode learned that part of its LKE users in the Frankfurt data center could not reach their kube-apiservers through kubectl. The status page opened at 14:27 UTC with "We are investigating reports of connectivity issues with the LKE service within the Frankfurt Datacenter".

   Control plane unresponsive

   Root cause

   Capacity exhaustion

   Component

   Kubernetes API serverContainer memory limit

   Contributing factor

   –

   Detection

   Linode was made aware of the problem at 14:11 UTC; the status page refers to reports of connectivity issues.

   Remediation

   • increased memory limits

   Action items

   • Increase resilience, redundancy and monitoring for the LKE components affected by the incident

   View case

By root cause6