Cases22 cases

16 to 20 of 22

1. IL-0049 Partial DNS outage after CoreDNS scaled down and kube-proxy failed to delete stale conntrack entries

   Preply2020

   Symptoms

   Prometheus detected a high rate of 5xx responses on three services, called A, B and C in the write-up, and paged the on-call engineers through VictorOps at 22:18 EET. The 5xx rate was also visible in Kibana.

   DNS resolution failuresHigh error rateStale endpoint routing

   Trigger

   Because load in the cluster was low, the CoreDNS autoscaler reduced the number of CoreDNS pods from 3 to 2.

   Root cause

   DNS or network fault

   Component

   CoreDNSkube-proxyconntrack table

   Contributing factor

   Automation amplificationIgnored early signalNo caching

   Detection

   Prometheus alerted on a high 5xx rate on services A, B and C and paged on-call through VictorOps.

   Remediation

   • reverted the latest release of the affected service
   • a regular deploy created new nodes, the CoreDNS autoscaler added CoreDNS pods, and the conntrack table was rewritten

   Action items

   • Disable the autoscaler for CoreDNS
   • Run a DNS cache server in production
   • Monitor conntrack usage

   Lessons

   Scaling CoreDNS down is not free: if kube-proxy fails to clear conntrack entries for the removed pod, clients keep sending DNS queries to it. Known DNS weaknesses in a cluster should be prioritised before they cause an outage, and fixes that only treat consequences leave the underlying conntrack problem in place.

   View case
2. IL-0033 Uneven load across kube-dns pods and a DNS packets-per-second limit pushed service latency to 20 seconds

   Airbnb2019

   Symptoms

   On May 10 the latency graphs of several services showed a few spikes of up to about one second, then latency climbed to five seconds and then to 20 seconds, and it stayed there for a long time. The same pattern appeared on many services, not just one.

   High latencyIntermittent timeoutsLoad imbalanceDNS resolution failures

   Trigger

   Several services sent a high volume of external DNS queries, all of which went through kube-dns.

   Root cause

   Capacity exhaustion

   Component

   kube-dnskube-proxyClient-side DNS resolver and cache

   Contributing factor

   Unreviewed defaults

   Detection

   Latency graphs of several services showed the rise; engineers then looked at load per kube-dns pod.

   Lessons

   By default a pod discovers DNS through the kube-dns cluster IP and uses the ClusterFirst policy, so even external lookups go through kube-dns. If a pod does not need cluster DNS, set its dnsPolicy to Default or None. Check the DNS policy early and often. iptables picks backends at random and is not a load balancer, so pods behind a cluster IP, kube-dns included, can carry very different loads.

   View case
3. IL-0047 Pod-to-pod requests delayed by 5, 10 or 15 seconds because of DNS lookups lost to a conntrack race

   MindTickle2019

   Symptoms

   Pod-to-pod calls were intermittently slow and the web application felt slow overall. A request that pod A sent at time x reached pod B at x + 5s, x + 10s or x + 15s, always a multiple of five seconds.

   Intermittent timeoutsHigh latencyDNS resolution failures

   Trigger

   The C library resolver sent the A and AAAA queries for each lookup on the same port; where DNAT or SNAT translation takes place, a race condition in conntrack sometimes left one of the queries unanswered, and the resolver waited 5 seconds before retrying.

   Root cause

   DNS or network fault

   Component

   conntrack tableClient-side DNS resolver and cacheLinux kernel

   Contributing factor

   Unreviewed defaults

   Detection

   The team noticed intermittent delays in pod-to-pod calls and slowness in the web application, and that the delays were always multiples of five seconds.

   Remediation

   • added the single-request-reopen option to dnsConfig in the deployment specs
   • set GRPC_DNS_RESOLVER=native in the Dockerfiles of gRPC applications so they used the libc resolver
   • checked with tcpdump port 53 that A and AAAA queries left from different ports

   Lessons

   Delays that are exact multiples of five seconds point to DNS lookups being retried after the resolver's 5-second timeout. A resolver option set in the pod spec only helps processes that use the libc resolver; runtimes with their own resolver, such as gRPC with c-ares, ignore it.

   View case
4. IL-0075 Kubernetes API servers pegged on CPU when the cluster grew to about 290 nodes, traced to Datadog agents polling the API

   Civis Analytics2019

   Symptoms

   After Civis released its new script infrastructure on Kubernetes internally in September 2018, developers reported that kubectl commands were slow, and users intermittently could not start notebooks and services.

   Control plane lagControl plane unresponsiveHigh latencyHigh error rateDNS resolution failures

   Trigger

   Migrating clients' Python, R and container scripts from the in-house Bocce system to Kubernetes (the project called Croquet) pushed the cluster to about 290 EC2 instances under a large script load.

   Root cause

   Capacity exhaustion

   Component

   Kubernetes API serverTelemetry agentetcd

   Contributing factor

   Unknown limitUnverified assumptionMonitoring blind spotNo capacity planning

   Detection

   Developer reports of slow kubectl commands and user reports of notebooks and services failing to start, then high CPU on the master nodes.

   Remediation

   • moved internal users back to the old Bocce infrastructure
   • resized the three master nodes from m4.large to m4.4xlarge
   • changed the Datadog setup so per-node agents no longer polled the API server for service metadata
   • raised max-requests-inflight for non-mutating requests from 400 to 1200
   • grew the etcd EBS volumes from 20 to 100 GB (100 to 300 IOPS)
   • switched client scripts from the ClusterFirst DNS policy to Default

   Action items

   • Upgrade etcd from 2.2.1 to 3.x once Kops supports a safe migration
   • Solve the in-cluster DNS timeouts so client scripts can talk to other workloads in the cluster

   Lessons

   Kubernetes can reach thousands of nodes only after tuning, and third-party DaemonSets are a common cause of control plane load: an agent on every node that polls or watches the API server multiplies with the cluster size. Datadog, kube2iam and the fluentd metadata filter all showed this. A small configuration change often fixes it, but finding it took load testing and the API server access logs.

   View case
5. IL-0001 Cluster-wide DNS outage after CoreDNS pods were OOM-killed again and again under a burst of DNS queries

   Zalando2019

   Symptoms

   Customers of the Zalando Fashion Store got a high rate of errors on all web product pages and outfit pages for more than an hour. The errors came from the main data aggregation layer service, which runs in one of Zalando's Kubernetes clusters.

   High error rateDNS resolution failuresOOMKilledMonitoring outage

   Trigger

   Calls from the aggregation layer to a single, not very important downstream service started timing out. The aggregation layer returned 404s for them, clients retried, and the resulting spike in requests became a spike in DNS queries to CoreDNS.

   Root cause

   Capacity exhaustion

   Component

   CoreDNSContainer memory limitClient-side DNS resolver and cache

   Contributing factor

   Unknown limitNo cachingRetry stormUnreviewed defaultsExcessive blast radiusMonitoring blind spot

   Detection

   The on-call engineer for the aggregation layer phoned the on-call Kubernetes engineer. Automatic paging did not happen because the cluster's monitoring and alerting ran inside the cluster and failed along with DNS. The Kubernetes engineer then saw that the CoreDNS pods were being OOM-killed.

   Remediation

   • Raised the CoreDNS memory requests and limits by hand from 100Mi to 2000Mi

   Action items

   • Introduce a more resilient DNS setup: CoreDNS fronted by dnsmasq on every node
   • Improve high-level alerting from outside the clusters, so that a cluster problem is known before or at the same time as applications are affected
   • Improve incident response processes and tooling so that any on-call engineer can escalate directly to other teams when automatic paging fails, for example through a chat bot

   Lessons

   The Kubernetes DNS setup was far from resilient enough: a single application could take down DNS for everything in the cluster. The blast radius of one application sending more DNS queries should be limited to one node at most, ideally to single pods. Known Kubernetes DNS problems, such as Linux kernel races in conntrack handling and the ndots 5 problem, were familiar to the team and partly mitigated, but their combined effect on the DNS infrastructure was worse than the team had understood. Monitoring that runs inside the cluster was not robust enough: when the cluster's DNS broke, it could not page anyone, and recovery took longer than it should have.

   View case

By root cause6