Cases2 cases

1 to 2 of 2

1. IL-0179 With DEBUG logging and synchronous log output, a high-traffic service filled the 64 KB stdout pipe, so request threads blocked in write() while holding database connections and HikariCP ran dry, failing requests in 30-second bursts

   MUSINSA2026

   Symptoms

   The on-call engineer for a high-traffic service was alerted that requests were failing in large batches every 30 seconds.

   High error rateIntermittent timeoutsConnection pool exhaustion

   Trigger

   DEBUG level logging was on in production when traffic surged, raising log volume to about 100 times normal while the service logged synchronously.

   Root cause

   Configuration change

   Component

   Application logging libraryContainer runtimeTelemetry agentApplication database

   Contributing factor

   Unverified assumptionExcessive blast radius

   Detection

   The on-call engineer was alerted that requests were failing in large batches every 30 seconds.

   Action items

   • Replace synchronous logging with TraceAwareAsyncAppender, which captures trace_id and span_id on the calling thread and drops logs instead of blocking when the queue is full (neverBlock=true)
   • Keep the amount of log output at a sustainable level, since an asynchronous queue still fills under sustained overload

   Lessons

   Removing AsyncAppender to keep trace IDs also removed the protection that kept request threads away from stdout back-pressure. A company-wide standard applies the same side effect to dozens of services, so check what a standard rests on and what working behaviour it takes away. ThreadLocal context does not cross into an asynchronous worker, but capturing it on the calling thread before handing the event off keeps both the IDs and the asynchronous output. Under extreme load, dropping log lines is preferable to stopping request handling.

   View case
2. IL-0087 After a cold reboot of RKE2 nodes, pods could not get IP addresses because Multus could not reach the Kubernetes API, and further reboots spread the failure to every node

   Fyra Labs2023

   Symptoms

   At around 2 AM ICT on 2023-04-09 the team saw unusual CPU use on one cluster node, which throttled every other service on it and made them fail. They presumed an upstream container runtime bug in containerd and runc and decided to fully reboot the affected nodes, taking the cluster down for maintenance on the assumption that it was not in active use.

   Sustained high node CPUService outage

   Trigger

   A full cold reboot of the nodes that showed unusual CPU use, followed by upgrades and cold reboots of the other nodes.

   Root cause

   unknown

   Component

   Multus meta-CNICalicoContainer runtime

   Contributing factor

   Harmful manual actionUnverified assumption

   Detection

   The team saw unusual CPU use on a node around 2 AM ICT and failing services on the rebooted nodes around 2:30 ICT; developers reported the Terra repositories down at 6:31 ICT.

   Remediation

   • uninstalled Multus and Calico and replaced them with the Cilium CNI
   • rolled back most cluster settings except the CNI

   Lessons

   Rebooting nodes to clear one problem can expose another; here a CNI chain could not reach the API server after a cold start. Repeating the same reboot on more nodes while the first failure was not understood spread the outage from a few nodes to the whole cluster. The team also found that Cilium's real resource use in their cluster was acceptable, contrary to the benchmark they had relied on.

   View case

By root cause2