Cases9 cases

1 to 5 of 9

1. IL-0179 With DEBUG logging and synchronous log output, a high-traffic service filled the 64 KB stdout pipe, so request threads blocked in write() while holding database connections and HikariCP ran dry, failing requests in 30-second bursts

   MUSINSA2026

   Symptoms

   The on-call engineer for a high-traffic service was alerted that requests were failing in large batches every 30 seconds.

   High error rateIntermittent timeoutsConnection pool exhaustion

   Trigger

   DEBUG level logging was on in production when traffic surged, raising log volume to about 100 times normal while the service logged synchronously.

   Root cause

   Configuration change

   Component

   Application logging libraryContainer runtimeTelemetry agentApplication database

   Contributing factor

   Unverified assumptionExcessive blast radius

   Detection

   The on-call engineer was alerted that requests were failing in large batches every 30 seconds.

   Action items

   • Replace synchronous logging with TraceAwareAsyncAppender, which captures trace_id and span_id on the calling thread and drops logs instead of blocking when the queue is full (neverBlock=true)
   • Keep the amount of log output at a sustainable level, since an asynchronous queue still fills under sustained overload

   Lessons

   Removing AsyncAppender to keep trace IDs also removed the protection that kept request threads away from stdout back-pressure. A company-wide standard applies the same side effect to dozens of services, so check what a standard rests on and what working behaviour it takes away. ThreadLocal context does not cross into an asynchronous worker, but capturing it on the calling thread before handing the event off keeps both the IDs and the asynchronous output. Under extreme load, dropping log lines is preferable to stopping request handling.

   View case
2. IL-0063 VPN outage after recreating a Redis StatefulSet restarted the whole Redis cluster without readiness checks

   AdGuard VPN2025

   Symptoms

   The day began with an alert that several instances of the Redis cluster were running out of disk space. That part was fixed quickly. The outage came an hour later: right after the Redis StatefulSet was deleted and recreated at 8:10 UTC, Kubernetes restarted every Redis pod within about five minutes, and problems started to appear.

   Service outageOOMKilledProbe failuresHigh latency

   Trigger

   To make Git match the volumes that had been resized by hand, the Redis StatefulSet was deleted with orphan (non-cascading) deletion and recreated with the new storage template; Kubernetes reconciled the new spec by restarting the entire Redis cluster.

   Root cause

   Configuration change

   Component

   Persistent volumes and stateful setsIn-memory cacheContainer memory limit

   Contributing factor

   No health probesUnverified assumptionSingle point of failureRetry stormNo headroom

   Detection

   An alert about Redis instances running out of disk space started the work; the outage itself showed up as backend errors about Redis connections right after the StatefulSet was recreated.

   Remediation

   • made the Redis masters forget obsolete node identities, reset the affected replicas and rejoined them, then waited for replication to catch up
   • identified the component that was actually running out of memory, scaled the backend service and raised memory limits for that component
   • temporarily relaxed probes so backend instances took traffic immediately instead of flapping between ready and not ready
   • reverted the temporary workarounds at 10:00 UTC

   Action items

   • Add startup probes so a Redis pod is not marked ready until its dataset is loaded
   • Build an own control plane for Redis that handles restarted pods stuck to an old master address
   • Reduce dependence on the single Redis cluster: move some important data to other stores, such as a separate Redis cluster per server, and use Kafka for some backend components

   Lessons

   The disk resize was not the problem; the cleanup afterwards was. An immutable field pushes operators toward deleting and recreating the controller, and that can set off a full reconcile. Startup and readiness probes are what slow a rolling restart down to a safe pace; without them a distributed store restarts in the most fragile way. Recovery plans must expect a cluster to heal slowly, and dependent services need to degrade gracefully while it does.

   View case
3. IL-0192 A Crossplane composition merge-policy change for a TLS policy update switched Kubernetes Services from LoadBalancer to ClusterIP and deleted the load balancers behind about 25% of Grafana Cloud services

   Grafana Labs2025

   Symptoms

   At 08:41 UTC on 18 February 2025, several Grafana Labs application teams noticed that some of their endpoints were no longer available. The investigation quickly found that the load balancers for those endpoints were gone.

   Service outageResources deleted

   Trigger

   A change to the merge policy of a Crossplane composition, made so that the default TLS policy of the load balancers could be overridden, was applied to development, staging and production at the same time.

   Root cause

   Configuration change

   Component

   Configuration templatingCloud load balancer

   Contributing factor

   Unverified assumptionNo staged rolloutExcessive blast radiusNo safeguard on destructive change

   Detection

   Application teams noticed at 08:41 UTC that some of their endpoints were no longer available.

   Remediation

   • rolled back the Crossplane composition change
   • recreated the affected Kubernetes Services so that Kubernetes recreated their load balancers

   Action items

   • Add a CI check that blocks a deployment to more than one wave, so any exception to the dev, staging, canary, production order is caught
   • Give higher priority to a more sophisticated wave design that was already under discussion
   • Enable deletion protection on the load balancers, one layer below Crossplane
   • Enable deletion protection on other critical cloud provider resources
   • Develop the Crossplane Managed Resources exporter for change validation and visibility, now in beta testing within Platform engineering; simulated against the change that caused this outage, it shows a clear diff
   • Complete and test support for reconfiguring the TLS policy so application teams can deploy it

   Lessons

   A change that looked small and low-risk had a side effect that only a full end-to-end test through Crossplane and the cloud provider's load balancer controller would have shown; seeing the intended override work was not that test. Staged rollout and blast-radius limits that exist only as process can be skipped, so Grafana Labs moved to enforce waves in CI and to add deletion protection on the load balancers themselves, beneath the Crossplane layer.

   View case
4. IL-0177 WebSocket connections to LINE's messaging-hub on Kubernetes dropped all at once whenever another service's change reloaded a shared HAProxy L7 load balancer, and the reconnect wave overloaded a token API and filled nf_conntrack on Nginx

   LINE+2022

   Symptoms

   The graph of WebSocket connections to messaging-hub, the messaging platform used by the Japanese food delivery service Demaecan, showed sudden deep drops even outside peak traffic. The drops kept coming back at irregular intervals. Messages still reached clients, because messaging-hub switches to Firebase Cloud Messaging when a WebSocket is gone.

   Connection resetsDatabase overloadIntermittent connection failuresHigh latency

   Trigger

   Another service that shared the same L7 load balancer deployed its own load balancer configuration in the Verda dashboard, which reloaded HAProxy; 30 minutes later, at the hard-stop-after limit, the old HAProxy process exited and closed every WebSocket connection it still held.

   Root cause

   Configuration change

   Component

   HAProxyCloud load balancerconntrack tableIngress controller

   Contributing factor

   Change with a delayed effectExcessive blast radiusRetry stormUnverified assumption

   Detection

   The developer noticed deep, sudden drops in the WebSocket connection graph that were not tied to peak traffic and kept recurring irregularly. The Nginx packet drops were found through network monitoring.

   Remediation

   • separated the Merchant system's token issuance API into its own deployment so reconnect traffic did not delay other Merchant APIs
   • scaled out Nginx with pod anti-affinity and a label selector so each pod ran on a different node, which stopped the nf_conntrack packet drops
   • raised Ingress Nginx proxy-read-timeout and proxy-send-timeout and the load balancer timeout to 3600s, which did not stop the drops
   • moved messaging-hub from the shared L7 load balancer to an L4 load balancer, which ended the WebSocket drops

   Lessons

   A reload of a shared load balancer by a different team can cut long-lived connections, and with hard-stop-after the cut comes 30 minutes later, far from the change that caused it. The author's lesson is not to narrow the scope of the search too early: trusting that the infrastructure was fine kept the investigation inside the team's own systems for days. A reconnect wave from many WebSocket clients can overload the systems that issue connection tokens and fill nf_conntrack on proxy nodes. Scaling Nginx out only helps for conntrack if the pods land on different nodes, and anti-affinity leaves extra replicas Pending once they outnumber the nodes. That messaging-hub problems can still load the connected systems remains an open problem.

   View case
5. IL-0209 A too-high HPA CPU target kept GitLab.com web pods from scaling up as traffic moved from VMs to Kubernetes, breaching the web latency SLO for 15 minutes

   GitLab2021

   Symptoms

   The web service breached its latency SLO at 07:30 UTC and its Apdex dropped: some requests to the GitLab.com web front end slowed down for about 15 minutes. This happened while web traffic was being shifted from virtual machines to the web pods on Kubernetes, and the pods did not scale up as the traffic arrived.

   High latencyAutoscaler misbehaviour

   Trigger

   Shifting web traffic from VMs to Kubernetes pods during the GitLab.com web migration.

   Root cause

   Configuration change

   Component

   Horizontal pod autoscaler

   Contributing factor

   Unverified assumption

   Detection

   The web latency SLO breach at 07:30 UTC; an engineer declared the incident in Slack at 07:40.

   Remediation

   • Lowered the target CPU utilisation of the web pods' autoscaler to a more conservative value (merge request gitlab-com/gl-infra/k8s-workloads/gitlab-com!1149)

   Action items

   • Adjust the target utilisation for the web pods (gitlab-com/gl-infra/k8s-workloads/gitlab-com!1149)

   Lessons

   When traffic is moved onto pods that rely on CPU-based autoscaling, a CPU target set too high can keep the pods from scaling as the traffic arrives; GitLab fixed it by setting a more conservative target.

   View case

By root cause1