Cases21 cases

9 to 13 of 21

1. IL-0161 A faulty earlier API update made new LKE cluster provisioning in Toronto time out for three days, leaving clusters with no node pools or the wrong number of nodes

   Linode2024

   Symptoms

   At about 14:05 UTC on 22 April 2024, Linode's team noticed that new LKE clusters were failing to provision in the Toronto data center.

   Cluster or node provisioning stallIntermittent timeouts

   Trigger

   A previous update to the API did not work as intended and caused timeouts when new LKE clusters were provisioned.

   Root cause

   Software defect

   Component

   Node pool

   Contributing factor

   –

   Detection

   Linode's team noticed new LKE clusters failing to provision in the Toronto data center at about 14:05 UTC on 22 April 2024.

   Remediation

   • disabled the affected section of Toronto infrastructure from provisioning new LKE clusters
   • implemented a fix for the faulty API update
   • put the disabled infrastructure back into use after the fix

   Lessons

   The fault was in an earlier API change, not in the infrastructure that showed it, but most failures concentrated on one backend resource in one data center. Taking that resource out of provisioning limited the impact while the root cause was found, which took three days.

   View case
2. IL-0169 The Scaleway Kubernetes API in FR-PAR ran out of memory under simultaneous deployments, and because it also handled node authentication, Kapsule and Kosmos nodes went NotReady

   Scaleway2024

   Symptoms

   At 23:48 CET on 24 January 2024 the Scaleway Kubernetes API for the FR-PAR region ran out of memory. At the same minute Scaleway saw requests to its API Gateway spike.

   Node NotReadyOOMKilledIntermittent timeoutsMonitoring outage

   Trigger

   Simultaneous deployments in the FR-PAR region pushed the Scaleway Kubernetes API out of memory.

   Root cause

   Capacity exhaustion

   Component

   Container memory limitkubelet

   Contributing factor

   Single point of failureRetry storm

   Detection

   Increased load on the API Gateway was detected at 23:48, the minute the incident began, and the incident was escalated to on-call engineers at 00:00:10.

   Remediation

   • raised the memory limit and garbage collection thresholds of the Kubernetes managed services
   • deployed additional replicas of key services
   • purged the registry cache and monitored the clusters as they stabilised
   • adjusted service configurations after the incident to keep the platform stable

   Action items

   • Implement a local authentication cache
   • Further develop node authentication
   • Enhance monitoring, adjust rate limiting strategies and improve incident response protocols

   Lessons

   Because the Kubernetes API also handled node authentication, its memory exhaustion made some nodes NotReady, and the endless retries of those nodes added load on the API Gateway. Scaleway plans a local authentication cache and further work on node authentication.

   View case
3. IL-0112 The daily node rollover put DFDS's EKS nodes on an AMI later recalled for a kernel issue, causing "PLEG is not healthy" NodeNotReady flaps and pod network timeouts

   DFDS2022

   Symptoms

   On 2022-10-31 a planned upgrade of the vpc-cni EKS add-on, started from the deployment pipeline at 13:45 UTC, timed out at 14:10. Only about 10 of the 45 aws-node pods had upgraded, 5 were stuck in Terminating and the other 30 had not been attempted.

   Node NotReadyUpgrade stallIntermittent timeoutsIntermittent connection failures

   Trigger

   At 07:30 UTC on 2022-10-31 the daily node rollover replaced the existing nodes with nodes built from AMI v20221027, the latest AWS EKS node AMI, released on 2022-10-29 and later recalled because of a kernel issue.

   Root cause

   Software defect

   Component

   Node operating system imageLinux kernelkubeletAWS VPC CNINode launch templateTerraform

   Contributing factor

   No staged rolloutAutomation amplificationOverlapping failuresMonitoring blind spotNo health probes

   Detection

   The team noticed nodes flapping between NodeNotReady and NodeReady ("KubeletNotReady PLEG is not healthy") at 14:30 UTC while watching the stalled vpc-cni upgrade, about seven hours after the rollover. Time to detection was 7 hours. Alerting did not catch the NodeNotReady events or the socket growth.

   Remediation

   • cordoned, drained and deleted 15 stuck nodes one at a time to complete the vpc-cni upgrade
   • changed the Terraform infrastructure-modules so a specific AMI could be set
   • rolled the EC2 Auto Scaling group launch configuration back to the previous known good AMI through the pipeline

   Action items

   • Reach out to teams with suggestions about readiness and liveness probes
   • Create a dashboard for readiness and liveness probe coverage
   • Write a wiki article on readiness and liveness probes and their usefulness
   • Modify infrastructure-modules to allow specifying a particular AMI
   • Schedule a discussion on whether to take the latest AMI immediately and how to test new AMIs before they are deployed
   • Implement alerting on abnormal NodeNotReady events and on increased socket use
   • Create a learning path for Kubernetes within the team
   • Collect logs from nodes centrally
   • Create a Prometheus exporter that retrieves the latest available AMI, with a dashboard and alerts

   Lessons

   When a new node AMI has just been rolled out, upgrading other cluster components on the same day makes it hard to tell which change is causing trouble; here the vpc-cni upgrade on the same day confused matters. Taking the latest AMI automatically with no way to pin one meant a rollback first needed a Terraform change. The team also concluded that it needs better communication paths with application teams during incidents.

   View case
4. IL-0178 On EKS, HPA scale-in returned 502 errors because containers stopped before their pod IPs left the Service endpoints, and after blue/green switches conntrack kept sending established connections to deleted pods behind an instance-mode ALB

   Lotte E-commerce2022

   Symptoms

   LOTTE ON, Lotte E-commerce's online shopping mall of about 40 microservices on Amazon EKS, returned errors for a period of time whenever the Horizontal Pod Autoscaler (HPA) scaled pods in after load dropped. Requests reached containers that had already been deleted and failed with 502 errors.

   High error rateIntermittent timeoutsStale endpoint routing

   Trigger

   HPA scale-in deleting pods, and the deletion of Blue pods after a blue/green switch of the Service label selector.

   Root cause

   DNS or network fault

   Component

   Horizontal pod autoscalerPod terminationkube-proxyconntrack tableCloud load balancerIngress controller

   Contributing factor

   Unreviewed defaults

   Remediation

   • delayed container shutdown on pod deletion (a wait in the SIGTERM handler or a preStop sleep, capped by terminationGracePeriodSeconds) so containers stop only after the pod has left the Service endpoints
   • switched some workloads' Ingress-created ALBs from instance mode to IP mode so traffic goes straight to pod IPs without iptables and conntrack

   Action items

   • Move all workloads to ALB IP mode gradually

   Lessons

   Removing a pod from Service endpoints and stopping its containers happen at the same time in Kubernetes, so a pod can stop while traffic is still routed to it unless shutdown is delayed with a preStop hook or in the application. With an instance-mode ALB, traffic passes through node iptables and conntrack, and established connections can keep going to a pod IP after its iptables rules are gone. IP mode avoids that path, within the limit of 1000 targets per target group.

   View case
5. IL-0115 One of OpenAI's three production AKS clusters went offline through a human error, and rebuilding it took 10½ hours because an AKS Kubernetes upgrade broke the ingress and AKS cannot be downgraded

   OpenAI2022

   Symptoms

   At 18:56 PDT on 23 June 2022 (01:56 UTC on 24 June) several models went offline at once: some fine-tuned curie and davinci models, the Codex beta models code-davinci-001 and code-cushman-001, the legacy GPT models curie, babbage and ada, and all Embeddings models.

   Service outageHigh error rateIntermittent timeouts

   Trigger

   A destructive operation on one of the three production clusters, caused by human error that the existing safeguards did not catch, took the whole cluster offline.

   Root cause

   Operator error

   Component

   Ingress controllerModel hub

   Contributing factor

   No safeguard on destructive changeNo headroomDeferred upgradesOverlapping failures

   Remediation

   • re-allocated the models from the lost cluster to the remaining two clusters
   • rebuilt the VPN link with Azure support after losing the connection to AKS during cluster setup
   • built workarounds with Azure support after losing the connection to Azure Private Link
   • tore down the cluster and rebuilt it from scratch after the upgraded Kubernetes version broke the ingress
   • moved traffic back into the rebuilt cluster between 05:30 and 06:30 PDT

   Action items

   • Add checks and locks so that this and similar production-critical infrastructure cannot be modified by accident
   • Add better visibility into the operations being performed and make parts of the system more lexicographically distinct
   • Keep working with Azure on the AKS network connectivity issues so they do not disrupt new cluster operations
   • Update playbooks with the new cluster failure modes and change the setup steps for new clusters and infrastructure
   • Upgrade Kubernetes systematically and set aside time so the clusters do not fall behind again
   • Shard fine-tuned models across multiple clusters and work towards more automatic cross-cluster replication
   • Distribute and replicate Azure Blob Storage so fine-tuned models load faster and more reliably
   • Finish rolling out node-to-node caching to relieve Azure Blob Storage bottlenecks
   • Change how model weights are stored so they are more efficient and faster to load

   Lessons

   Losing one of three clusters exhausted the GPU headroom, and GPUs could not be added on short notice, so full recovery depended on bringing the same cluster back. Rebuilding it exposed a deferred Kubernetes upgrade: the newer version broke the ingress, and because AKS cannot downgrade there was no way back except a full rebuild. Recovering many large models at once is limited by the bandwidth of the storage they load from, and the caches that normally hide this do not help when everything moves to a different cluster.

   View case

By root cause7