Cases7 cases

4 to 7 of 7

1. IL-0049 Partial DNS outage after CoreDNS scaled down and kube-proxy failed to delete stale conntrack entries

   Preply2020

   Symptoms

   Prometheus detected a high rate of 5xx responses on three services, called A, B and C in the write-up, and paged the on-call engineers through VictorOps at 22:18 EET. The 5xx rate was also visible in Kibana.

   DNS resolution failuresHigh error rateStale endpoint routing

   Trigger

   Because load in the cluster was low, the CoreDNS autoscaler reduced the number of CoreDNS pods from 3 to 2.

   Root cause

   DNS or network fault

   Component

   CoreDNSkube-proxyconntrack table

   Contributing factor

   Automation amplificationIgnored early signalNo caching

   Detection

   Prometheus alerted on a high 5xx rate on services A, B and C and paged on-call through VictorOps.

   Remediation

   • reverted the latest release of the affected service
   • a regular deploy created new nodes, the CoreDNS autoscaler added CoreDNS pods, and the conntrack table was rewritten

   Action items

   • Disable the autoscaler for CoreDNS
   • Run a DNS cache server in production
   • Monitor conntrack usage

   Lessons

   Scaling CoreDNS down is not free: if kube-proxy fails to clear conntrack entries for the removed pod, clients keep sending DNS queries to it. Known DNS weaknesses in a cluster should be prioritised before they cause an outage, and fixes that only treat consequences leave the underlying conntrack problem in place.

   View case
2. IL-0013 The conntrack table filled up on downsized GKE nodes and a high-traffic aggregation proxy saw climbing connection resets

   loveholidays2020

   Symptoms

   Shortly after a round of changes, loveholidays saw connectivity problems and raised error rates on its aggregation service. The service is a proxy between two other services of more than 100 instances each, handles over 10,000 requests per second continuously and can spike to four times that.

   Connection resetsHigh error rateIntermittent connection failures

   Trigger

   Three changes together: a change in service architecture, halving the RAM of the nodes that run the aggregation service, and sharding a downstream service, which doubled the number of connections to track.

   Root cause

   Capacity exhaustion

   Component

   conntrack tablekube-proxyNode poolHAProxy

   Contributing factor

   Unknown limitNo capacity planningNo alert on limit

   Detection

   Rising error rates and climbing connection reset errors in HAProxy, then node_exporter conntrack metrics compared with their limit.

   Remediation

   • moved the aggregation service to nodes with more RAM
   • limited the number of aggregation service pods per node

   Action items

   • Alert when conntrack table use goes above 75%, with (node_nf_conntrack_entries / on (pod) node_nf_conntrack_entries_limit / on (pod) group_right kube_pod_info) > 0.75

   Lessons

   The conntrack limit is tied to node memory, so resizing a node pool silently resizes the connection table, and on GKE the ratio did not match the commonly cited formula. A high-traffic proxy on small nodes can exhaust it, and the symptoms are connection resets and timeouts, so conntrack use needs its own metric and alert.

   View case
3. IL-0033 Uneven load across kube-dns pods and a DNS packets-per-second limit pushed service latency to 20 seconds

   Airbnb2019

   Symptoms

   On May 10 the latency graphs of several services showed a few spikes of up to about one second, then latency climbed to five seconds and then to 20 seconds, and it stayed there for a long time. The same pattern appeared on many services, not just one.

   High latencyIntermittent timeoutsLoad imbalanceDNS resolution failures

   Trigger

   Several services sent a high volume of external DNS queries, all of which went through kube-dns.

   Root cause

   Capacity exhaustion

   Component

   kube-dnskube-proxyClient-side DNS resolver and cache

   Contributing factor

   Unreviewed defaults

   Detection

   Latency graphs of several services showed the rise; engineers then looked at load per kube-dns pod.

   Lessons

   By default a pod discovers DNS through the kube-dns cluster IP and uses the ClusterFirst policy, so even external lookups go through kube-dns. If a pod does not need cluster DNS, set its dnsPolicy to Default or None. Check the DNS policy early and often. iptables picks backends at random and is not a load balancer, so pods behind a cluster IP, kube-dns included, can carry very different loads.

   View case
4. IL-0054 All ingress traffic lost while draining a GKE node pool because the load balancer only targeted new nodes without ingress-nginx pods

   DevOps Hof2019

   Symptoms

   While the old nodes of a GKE cluster were being drained to move workloads to a newly created node pool, none of the services in the cluster could be reached through ingress-nginx any more.

   Service outageProbe failures

   Trigger

   Cordoning and draining the old node pool removed those nodes from the GCP load balancer backend while the ingress-nginx pods were still running on them.

   Root cause

   Operator error

   Component

   Ingress controllerkube-proxyNode pool

   Contributing factor

   Unreviewed defaultsUnverified assumption

   Detection

   The team noticed during the drain that no service in the cluster was reachable through ingress-nginx.

   Remediation

   • deleted the nginx-ingress-controller pods still running on the old nodes so they were rescheduled on the new, ready nodes

   Lessons

   With externalTrafficPolicy: Local, the load balancer can only reach nodes that run an ingress pod, and cordoned nodes leave the load balancer backend immediately; if the ingress pods stay behind on cordoned nodes, all ingress traffic stops. Before any change that might touch traffic, look twice into the documentation.

   View case

By root cause5